predictive emissions monitoring Articles

  • The Pros and Cons of Predictive, Parametric, and Alternative Emissions Monitoring Systems for Regulatory Compliance

    This paper closely examines the pros and cons of using predictive, parametric, and alternative monitoring techniques for regulatory compliance. While many predictive and parametric monitoring systems are less expensive to install and operate than CEM systems and demonstrate exceptional relative accuracy test results, this paper will provide the reader with a better understanding of the ...

  • More 2011 Predictions

    Will the new Congress impede the EPA's regulatory agenda? The New Year offers both promise and trepidation in 2011 from EPA's Office of Chemical Safety and Pollution Prevention (OCSPP). EPA appropriations Many expect a freeze in domestic program spending, but that could just be the beginning of a general squeeze on EPA resources. Hiring restrictions, personnel ...


    By Bergeson & Campbell, P.C.

  • More 2011 Predictions

    Will the new Congress impede the EPA's regulatory agenda? The New Year offers both promise and trepidation in 2011 from EPA's Office of Chemical Safety and Pollution Prevention (OCSPP). EPA appropriations Many expect a freeze in domestic program spending, but that could just be ...


    By Acta Group

  • An odor predictive model for Rendering applications

    Abstract The rendering process consists of crushing and heating animal remains to produce by-products. The U.S. produces approximately 30 billion pounds of inedible animal by-products annually, exporting a market value of US$ 1.5 billion. Benefits of the rendering process include reducing total waste material, and helping the livestock industry stay competitive over vegetable protein ...


    By Biorem Technologies Inc.

  • Effects of averaging time on predicted gas concentrations

    The potential consequences of a particular gaseous emission usually relate to a specific averaging time. However, the averaging time associated with gas monitoring data in the region of a discharge may differ from the averaging time implicit in a model employed to predict the concentration resulting from that emission. Tables of factors exist for taking account of such differences and recent ...


    By Inderscience Publishers

  • A statistical model for predicting carbon monoxide levels

    This paper presents a statistical model that is able to predict carbon monoxide (CO) concentrations as a function of meteorological conditions and various air quality parameters. The experimental work was conducted in an urban atmosphere, where the emissions from cars are prevalent. A mobile air pollution monitoring laboratory was used to collect data, which were divided into two groups: a ...


    By Inderscience Publishers

  • Monitoring CO2 emissions from passenger cars and vans in 2013

    The European Environment Agency (EEA) supports the European Commission in the monitoring of the CO2 performance of passenger cars, in accordance with Regulation (EC) 443/2009, and of light commercial vehicles in accordance with Regulation (EC) No 510/2011. The regulation for passenger cars sets a CO2 'specific emission' (1) target of 130 g CO2/km by 2015 whilst the regulation for light commercial ...

  • Making money by reducing emissions

    Efforts to reduce emissions are really about changing companies' behavior. Pressure on companies from various activist groups combined with daily headlines in national and international media are driving various agendas among federal, state and local regulators. The current financial crisis does not appear to have lessened this pressure, rather the opposite. Compliance is now a must; ...


    By VisionMonitor Software, LLC

  • Application of an ISCST3 model for predicting urban air pollution in the Izmir metropolitan area

    A Gaussian atmospheric dispersion model, Industrial Source Complex Short Term (ISCST3), was used to estimate ground-level concentrations of sulphur dioxide (SO2) emitted from source categories of industrial and domestic heating in the city of Izmir, Turkey. Predictions were estimated for the year 2000 across a study area of 80 km x 100 km. Statistical analyses were carried out to evaluate ...


    By Inderscience Publishers

  • 2011 Predictions for EPA`s Office of Chemical Safety and Pollution Prevention

    The Acta Group, L.L.C.'s (Acta) thoughts are below on what may be headed our way in 2011 from the U.S. Environmental Protection Agency's (EPA) Office of Chemical Safety and Pollution Prevention (OCSPP). In short, the general trends established by the Obama Administration during the past two years are expected to continue notwithstanding the 2010 election results. At the same time, the impact of ...


    By Acta Group

  • Application of urban street canyon models for predicting vehicular pollution in an urban area in Dublin, Ireland

    The relative performance of two atmospheric dispersion models STREET and OSPM is assessed using measured CO and NOx data obtained adjacent to an urban street canyon. This paper in particular, evaluates the performance of STREET, a mathematical model, to determine its suitability as an alternative to the OSPM model, which is a more elaborate numerical model. ...


    By Inderscience Publishers

  • Urban Noise Monitoring in Madrid

    Dynamic mapping helps Madrid improve the quality of life for her citizens and visitors alike. With its 3 000 000 inhabitants and 2500 km of streets, Madrid is an excellent example of what can be done to improve human comfort related to urban noise. Since the late 60s, Madrid City Council has been working on noise problems. During this period, global environmental analysis has focused on how ...

  • Monitoring - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Air Rule for Cement Kilns Requires 92 Percent Cut in Mercury Emissions

    Portland cement kilns will be required to reduce emissions of mercury by 92 percent as part of an Environmental Protection Agency final rule announced Aug. 9 that imposes controls for several toxic pollutants. Although most of the emissions standards in the final rule are less stringent than what the agency had proposed in 2009, the cement industry said the cost to operate the required controls ...


    By Ohio Lumex Co., Inc.

  • Simplified mass balance method: An accurate way to track refrigerant emissions

    With the simplified mass balance method, current levels of harmful refrigerant gases or other chemicals that harm the environment, such as hydrofluorocarbons (HFCs) and chlorofluorocarbons (CHCs), can be calculated and work to better predict of future levels of accumulated emissions formulated. This emissions information enables environmental scientists and government regulators to better ...


    By Verisae

  • NOx in Non-Utility Industries - Part I NOx in Non-Utility Industries - Part I - Air emission origins, best control solutions and monitoring methodology for nitrogen oxides

     Problems with reducing nitrogen oxides (NOx) are widespread in the general process industries. These industries, together with medium size utility and power generators contribute about 15 percent of global NOx emissions. The emission sources addressed include various heaters employed in chemical and petrochemical plants, nitric and sulfuric acid plants, glass furnaces, iron and steel mills, ...


  • The Whole Plant Approach to Air Emission Modeling for NESHAP Compliance

    ABSTRACTLong overlooked, the air emissions associated with biological treatment of process wastewaters continue to be further scrutinized and regulated. The common approach is to utilize EPA’s Water9 as a model to present findings and support permitting activities. It is essential when using a model that not only is the facility modeled appropriately, but also that the specific compound ...

  • Unmanned remote and wireless CDM monitoring case study

    Remote and wireless monitoring technology to meet CDM requirements is in its infancy in Europe. Carbon trading is driving it globally, especially in North and South America. That experience and technology is now finding a demand in Europe and Asia in landfill, biogas from food and animal waste in digesters and water treatment sludge digestion. Methane recovery from landfill and anaerobic ...


    By Geotech

  • An inverse modelling approach for estimating vehicular emissions in urban coastal areas of the Messina Strait

    The CALPUFF modelling system was used to predict dispersion of contaminants emitted from industrial, naval and vehicular sources in the Strait of Messina area (Italy). This region is of particular interest in that it relates to the construction of the Messina Bridge, the road infrastructure linking the Italian mainland and Sicily. The domain includes two cities, i.e., Messina and Reggio Calabria, ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you