pressure blower Articles

  • Blower Door Pressure Testing, Unvented Attics and Florida Homes

    I recently traveled to theCaribbean on a building science investigation. A large multi-national corporation owns several homes there for local executives. These homes had been plagued with dampness and mold growth problems for several years.  After several attempts to correct these problems, IET was called in, as we had ...

  • With high-pressure in the mixer AERZEN‘s energy-efficient blower technology

    According to the Federal Statistical Office, annual sales of bakery goods total around EUR 18 billion. Behind this is an annual consumption of 85 kilogrammes per inhabitant, within which the general public prefers bread, which accounts for 63 percent of the total. With this type of food being so popular, the market is extremely competitive. The significance of larger medium-sized bakeries and ...

  • Everything Depends on Pressure And Maintenance

    Energy and cost efficiency of biological treatment plants Every biologically working sewage plant needs a compressed air station for the oxygen supply of the aeration basin. This station only works at the highest possible energy efficiency level if excessive plant pressure through the subordinated system, excessive intake temperatures due to insufficient aeration and deaeration, and ...

  • Differential Pressure and Temperature Monitoring in a Hospital Cleanroom

    Accsense A1-01a Wireless Environmental Data Loggers CHESTERLAND OH—April 9, 2012 CAS DataLoggers recently provided the wireless pressure and temperature monitoring solution for a hospital maintaining a surgery cleanroom to protect patients from a variety of environmental contaminants. Staff entered and exited through airlocks and were required to wear cleanroom suits before entering. Air ...


    By CAS DATALOGGERS

  • A venturi device reduces membrane fouling in a submerged membrane bioreactor

    In this study, for the first time, a venturi device was integrated into a submerged membrane bioreactor (MBR) to improve membrane surface cleaning and bioreactor oxygenation. The performances of a blower and the venturi device were compared in terms of membrane fouling and bioreactor oxygenation. Upon comparing membrane fouling, the performances were similar for a low operation flux (18 ...


    By IWA Publishing

  • KLa Slot Injector™ Aeration System Expands the Capacity of an SBR at a Landfill Leachate Treatment Facility

    The Challenge A landfill had an existing single basin SBR plant to process the leachate which is notable for its high nitrogen load. The original system was installed with a fine pore diffuser aeration system and due to the chemical/biological composition of the mixed liquor it was prone to diffuser fouling and premature membrane failure Over time this was detrimental to the biological process ...


    By KLa Systems, Inc.

  • SVE and Air Sparging

    Stage 1: The system is a PLC controlled plant equipped with telemetry. Rotary Lobe blowers were used to abstract vapour contaminated with chlorinated hydrocarbons and a similar high pressure blower was used to inject air via solenoid valves individually controlled by the PLC. Extracted vapour was treated in large GRS 2 tonne vapour-phase activated carbon vessels.Stage 2: The system comprised ...


  • KLa Systems Offers “Retrofit Opportunities”

    KLa Systems is in a unique position to assist industries in meeting the challenges of production expansion and optimizing energy usage in their wastewater treatment facilities. Our Slot Injector system can easily retrofit all types of diffuser systems including conventional jet aeration systems within existing tanks and basins. Higher (15-60%) oxygen transfer rates can be achieved using the ...


    By KLa Systems, Inc.

  • AERZEN is helping a WWTP to reduce its energy usage

    Intelligent air supply for wastewater treatment plants The wastewater treatment plant at Rheda-Wiedenbrück is currently testing a brandnew control concept for AERZEN blower technology - the AERsmart control combination. Modernisation work at the wastewater plant began in 2013. The citizens of the Rheda-Wiedenbrück region, as well ...

  • We purify our waste­ water optimally

    Holzkirchen wastewater treatment plant achieves a new milestone in energy efficiency with AERsmart The Holzkirchen wastewater treatment plant has a clearly stated objective: “We purify our wastewater optimally.” For the municipal wastewater treatment plant, located 40 kilometres south of Munich, there is a requirement to operate in a way that is as resource-efficient as ...

  • 5 Must Do Steps to Keep Your Jet Aeration System Running Smoothly

    Sustained low dissolved oxygen levels in an aeration tank can cause a host of problems — including difficulties in maintaining soluble BOD (biochemical oxygen demand), reduced nitrogen removal efficiency, and challenges with biomass separation. A jet aeration system offers a solution, utilizing both a pump and blower to meet the oxygen transfer requirements of a biological process. A well ...


    By KLa Systems, Inc.

  • Soil remediation system - Trailer mounted portable afterburner

    The Problem A major Vapor & Odor Control company needed a portable solution to clean the soil leftover at old fuel stations. portable afterburner The Process Soil Remediation Afterburners & Oxidizers are manufactured to treat soil containing contaminates such as petroleum hydrocarbons, with diesel oil, gasoline, ...


    By Epcon Industrial Systems, LP

  • Trailer Mounted Afterburner for Soil Remediation

    The Problem A major Vapor & Odor Control company needed a portable solution to clean the soil leftover at old fuel stations. The Process Soil Remediation Afterburners & Oxidizers are manufactured to treat soil containing contaminates such as petroleum hydrocarbons, with diesel oil, gasoline, aromatic hydrocarbons, solvents and many other ...


    By Epcon Industrial Systems, LP

  • The mills grind efficiently

    The – “Milser Mühle“ – has relied on AERZEN for 50 years When the Borgstedt Family took over the Milser Mühle 130 years ago, at first, it only produced feed material, and then, from 1918, it started to produce flour for human food. “Therefore we selected oilfree compressing AERZEN Positive Displacement Blowers of series GM as conveying air producer ...

  • KS 1000 compact stripper case study - IEG Technologie GmbH

    VOC-contaminated groundwater is treated in a 2-stage low-profile compact vacuum stripper (CVS). A negative pressure blower applies a vacuum to the treatment chamber. In this chamber a 2-stage stripping reactor is located and the stripping air is directed to the upper tray. The groundwater loops around on the upper tray along designate barriers, while the stripping air is being pulled through the ...


    By IEG Technologie GmbH

  • Chaff and straw spreader for a plot combine

    Uniform distribution of crop residue is critical in long-term no-till and conservation-till cropping systems experiments. Many farm-scale combines utilize factory or aftermarket chaff and straw spreaders, but most plot combines for research lack this capability. We fabricated a high volume air system to evenly distribute chaff and straw behind a plot combine. The combine engine powered a ...

  • Every kilowatt utilised optimally

    Heat recovery with AERZEN blowers As a part of an extensive renovation project, the city of Filderstadt modernised the Bombach wastewater treatment plant, located in the district of Bonlanden. Now, Delta Hybrid rotary lobe compressors made by AERZEN provide optimal oxygen supply, and, thanks to heat recovery measures, the energy balance has improved further. Although ...

  • Breathe easy: The importance of emission reduction and energy efficiency

    Breathe easy Blue oil mist is an unwelcome by-product of industrial work in the energy sector. contec specialises in high-powered, energy efficient and environmentally friendly oil mist filtration systems that reduce health risks and are an inexpensive alternative to traditional exhaust piping. The high concentrations of blue oil mist produced by industrial ...

  • Creative Service Solutions - Case Study

    A paper mill in Finland suffered the complete failure of a large four-stage vacuum blower. Creative problem solving resulted in a repair time of only seven days. The maintenance team built a functional blower by using parts from three outdated machines. The combined efforts of Sulzer and of the paper mill’s own engineers made it possible. The paper industry has to cope with a ...


    By Sulzer

  • Case study - Cheese manufacturer gets aeration upgrade

    Largest Cheese Manufacturer in the UK Gets Aeration Upgrade Dairy Crest Davidstow Creamery in Camelford is the largest cheddar cheese manufacturer in the UK. The process of collecting and processing milk is a 24/7 operation, generating effluent round the clock and needing to be treated and disposed of continuously. Effluent from the cheese-making process contains high fat content and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you