pressure-line strainer Articles

  • Top 10 Valve Considerations for Pressure Management Zones/DMA’s

    For basic pressure management or more advanced modulating pressure management, water suppliers create a network of District Metered Areas (DMA’s) or smaller, more manageable pressure management zones. The DMA or pressure zone gives the ability to measure flow and control pressure, when a Pressure Reducing Valve (PRV) ...


    By Singer Valve Inc.

  • Top 8 things to check when maintaining a Pressure Reducing Valve

    Like every other piece of mechanical equipment we use, a control valve does require some maintenance. As budgets are stretched and time is tight, it can be tempting to ignore checking on valves that are often located in underground vaults and give years of operation without complaint, but eventually like everything else, they will fail. This article looks at 8 simple steps that if undertaken ...


    By Singer Valve Inc.

  • GEM steam traps stop mechancial trap failure & reduce condensate return pressure by 51% at KNPC shuaiba refinery

    Keeping on top of the constant challenge of repairing and replacing thousands of mechanical steam traps is no longer a problem at KNPC’s Shauiba Refinery in Kuwait following the successful conversion of 1,750 mechanical traps to Thermal Energy International’s award winning GEM Venturi Orifice design.  In addition, KNPC, a subsidiary of the Kuwait Petroleum Association, has seen ...

  • Replacement Fill Control Valves with Electronic Flow and Metering Improve Pressure, Stop Leakage and Prevent Valve Failures

    The City of Modesto, California is situated 90 miles east of San Francisco and has approximately 200,000 residents relying on 200,000 of gallons of water a day. The City needed to upgrade three water storage tanks that hold approximately 750,000 gallons each. After years of using motor operated valves to fill water storage tanks, the city recognized that there were just too many problems. ...


    By Singer Valve Inc.

  • Don’t Let Your Control System Control You

    Regular maintenance ensures valves remain healthy. If your system is operating properly, you should physically inspect all valves at least every 12 weeks to check for tubing leaks and other abnormalities. Pressure gauges should be checked to ensure each valve is performing as designed. If you find something wrong, refer to the appropriate instruction manual, which may be available online. Because ...


    By Singer Valve Inc.

  • Healthy Control Valves

    A simple maintenance routine can help ensure trouble-free valve operation. Whether the control valve in your system is the first one that has required maintenance or if you are experienced with maintaining multiple valves in your system, some simple guidelines can help keep them operating at optimal performance. Physically checking all valves at least every 12 weeks is important, assuming that ...


    By Singer Valve Inc.

  • Keeping Your Control Valves in Good Health

    Whether that brand new control valve in your system is the first one you have ever had to look after or if you are an old hand at valve maintenance with tens of valves in your system, there are a few simple guidelines and reminders for keeping it operating at optimal performance. It’s important to physically check valves at least every 12 weeks or so, assuming everything is running fine in ...


    By Singer Valve Inc.

  • Pump Maintenance Know-How

    It’s no secret that a pump that runs at peak efficiency uses less fuel, experiences less downtime and costs less to operate. The time you spend maintaining your pump is actually an investment in its lifetime performance and value. In fact, there are many ways that a diligently maintained pump can reduce your costs, while increasing efficiency. For instance, by ensuring your pump investment ...


    By Gorman-Rupp Co.

  • Pump Performance Checklist

    Keeping your pump in shape will help reduce costs and boost profits! Cut fuel consumption, reduce replacement parts costs and minimize pumping time on every job! A PUMP THAT LETS YOU DOWN when you need it most causes obvious losses of time and money. Not so obvious, but every bit as costly, are losses you can incur with pumps that operate at less-than-peak efficiency. A pump ...


    By Gorman-Rupp Co.

  • Spray Painting Industry: Wynnum Car Renovators Panel Beating & Towing

     Background Wynnum Car Renovators Panel Beating & Towing (WCR) is a medium sized spray painting and panel beating workshop which employs eight staff. Over the years, Peter Watson (Manager of WCR) has been continuously thinking of ways to improve his business productivity, reduce operating costs, and help protect the environment. He has to date introduced a number of waste ...


  • Preventing Rust Formation with Electronic Water Treatment

    The growing demand for water for industrial applications, power production and water supply has resulted in an increasing need for water treatment. The water used in industry comes from a range of sources such as rivers, lakes, wells and oceans and contains dissolved and suspended solids.  In addition the industrial world has to reuse water which in turn causes it to be highly concentrated ...

  • Magnetic filtration used in a candy manufacturing plant

    Candy ManufacturerPt. Mayora Indah Tbk.IndonesiaPROBLEM: High levels of finished product being rejected due to ferrous contamination.SOLUTION: Beny Hermawan of PT. Sinarmentari Indoprima the Indonesia distributor for OEI installed an OEI magnetic filter rod (3RNC5812) in an existing T-Strainer on the finished product line (photo A).RESULTS: Photo B: contamination captured 44 grams ...


  • Megawatt out of chips

    König + Neurath AG, one of the leading European office furniture manufacturers, in Karben near Frankfurt/Main besides other materials process derived timber products such as chipboards and multiplex boards to produce office furniture for nearly any furnishing purpose. The resulting wood residues are not discharged but processed to become combustible by means of which the complete heating and ...


  • Tar and Pitch

    Tar and Pitch Pumping liquid tar and pitch with zero leakage and reduced maintenance The pumps used have to be heated and have wear resistant bearings. Tar is often transported in ships. The pumps on board bring the tar to the storage tank from which it is pumped to the distillation towers where it is fragmented. During the process about half the tar ends up as ...


    By DESMI A/S

  • Improving and maintaining the performance of your Heat Exchanger or Condenser.

    The usage of Heat Exchangers or Condensers is common in many processes across a wide range of industries. The Energy sector is no different, either in the Thermal Power Generation, Upstream and Downstream of the Oil and Gas including Petrochemical and Chemical plants; Heat Exchangers are used to cool of the steam or to pre-heat different liquid needed in the processes. The recurrent problem of ...

  • Act now to beat EU changes to wastewater treatment regulations

    Introduction Over the past few months, signals have been emanating from Brussels that hint at tighter wastewater treatment regulations. For instance, not only has Carlos Moedas, EU Commissioner for Research, Science and Innovation, recently been calling for better treatment systems for wastewater, but former Environment Minister, Janez Potočnik, has backed ...

  • 3 Steps to Choosing a High Quality Filter Element

    The primary function of a hydraulic filter is to remove contaminants as oil flows through a permeable element called the media. The quality of the element determines how well a filter can function. It may be surprising to learn that 75 per cent of all system failures in ...


    By Fluid Line Services

  • Case study - UV systems for spas & hydro pools

    With the rise of health centres and leisure clubs throughout the UK, a key feature in many modern facilities is the inclusion of spas and hydro pools.  As a specialist aquatic application, spas and hydro pools feature high turnover rates, high bather loads, increased turbulence and water temperatures above 35oC.  This combination of factors provides a perfect breeding ground for harmful ...


    By atg UV Technology

  • Top 5 Causes for AODD Pump Failure

    1.       Air Valve Stalling, Clogging or Leaking: Stalling of the air valve often has to do with the design of the airways inside the valve. If the design in less than optimal it will stall under certain conditions. Same can be said about leakage of air where the air mostly blows through the valve instead of being redirected to push the diaphragm. Clogging on the other hand ...


  • Effective Removal of Zebra Mussels with Amiad Screen Technology

    Introduction The zebra mussel, native to the Black and Caspian Seas, has spread in the past few decades to waterways throughout the world mostly via ballast water. Zebra mussels, when non-indigenous to the environment, pose a serious threat to intakes of facilities that rely on fresh and brackish surface water. The mussel colonies obstruct the flow of water through the pipelines eventually ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you