pressure monitoring Articles

  • Reverse Osmosis and Nanofiltration Membrane Filtration Systems: Common Problems and How to Fix Them

    Reverse osmosis (RO) and nanofiltration (NF) are membrane filtration technologies that are designed to remove solute ions and molecules from a pretreated liquid stream. Well-designed RO/NF units are compact and demand relatively little maintenance, making them an attractive alternative to conventional treatment trains. Even despite the merits of today’s efficient RO/NF technologies, it pays ...


    By SAMCO Technologies, Inc.

  • Dry Air Scrubber for Propylene Oxide

    Background For decades, Advanced Air Technologies, Inc. has been the leader in air scrubber  technology for abatement of Ethylene Oxide (EtO) emissions.   In fact, AAT, Inc. was founded in 1987 on a unique dry scrubbing, chemi-sorption process for EtO.  The result is a series of fixed bed “Safe-Cell II” dry scrubbers, consisting of the DR-490, DR-50, and ...

  • UV Minimises Risks for Major Food Retailers

    For many years, one of the UK’s largest food manufacturers has made it their business to be the best at producing all manner of bespoke cooked and raw, ready-to-eat vegetables and carbohydrates for their customers, who include chilled food manufacturers, food-to-go operators and, of course, major supermarkets. Being the best means not only complying with food quality standards set by ...


    By atg UV Technology

  • Air Pressure Monitoring for a Chemical Fume Hood

    CAS DataLoggers recently provided the pressure and temperature datalogging solution to a manufacturer using a chemical fume hood to protect workers by containing vapors, dusts, gases, and fumes, and then expelling them as air flowed into the hood from the front (open) side of the cabinet and then out via the ducted hood exhaust system. Designed for 2 operators, the fume hood had a Fiberglas ...


    By CAS DATALOGGERS

  • Differential Pressure and Temperature Monitoring in a Hospital Cleanroom

    Accsense A1-01a Wireless Environmental Data Loggers CHESTERLAND OH—April 9, 2012 CAS DataLoggers recently provided the wireless pressure and temperature monitoring solution for a hospital maintaining a surgery cleanroom to protect patients from a variety of environmental contaminants. Staff entered and exited through airlocks and were required to wear cleanroom suits before entering. Air ...


    By CAS DATALOGGERS

  • Irradiation embrittlement monitoring procedures and results of reactor pressure vessels of the WWER type

    This paper describes part of a knowledge preservation programme coordinated by JRC Petten. The following issues are discussed and analysed: comparison of surveillance specimen results from WWER-440 and 1000 units; surveillance specimen programme modernisation based on the new philosophy and approaches; the efficiency of Reactor Pressure Vessel (RPV) steel annealing by implementation of procedures ...


    By Inderscience Publishers

  • Case study - City of Sault Ste. Marie - Pressure Monitoring

    The condition assessment project consisted of a Sahara pipeline inspection to detect any leaks or pockets of trapped gas on the lines, as well as a period of pressure transient monitoring on each pipeline to check for any sudden peaks or drops in the pressures which could be damaging to the lines. Service: Sahara Transient Pressure Monitoring Client: City of Sault Ste. Marie Type of ...


    By Pure Technologies

  • Case study - Reservoir Aabach Germany - Continuous monitoring of contact pressure

    With a total volume of approximately 20 million cubic meters of water and a length of 450 meters, the reservoir supplies drinking water for 200.000 people in the area and fulfils also an important  function in the flood protection there. With the new monitoring solution it was possible to reduce the workload and cost for collecting, reading out and transmitting of data significantly. An ...


    By The OTT Hydromet Group

  • A Comparison Of Microbial Repair Mechanisms With Low Pressure And Medium Pressure UV Lamps

    Introduction It is well-known that bacteria and other microorganisms are capable of repairing their DNA following damage by ultraviolet (UV) radiation. Known as ‘reactivation’, it is a natural defense mechanism that has evolved over millions of years. Some microorganisms need visible light in order to repair their DNA (known as ‘photoreactivation’), while others can repair their DNA without light ...


    By Aquionics Inc

  • European waters - assessment of status and pressures

    EEA 2012 'State of Europe's water' assessments 2012 is the European year of water in which the European Commission published its 'Blueprint to safeguard Europe's waters' (referred to hereafter as the Blueprint) comprising reviews of the Water Framework Directive (WFD) (2000/60/EC), water scarcity and drought and adaptation to climate change policies. To accompany and inform the blueprint, ...

  • Protect your high pressure pump

    There are many opportunities to protect your high pressure pump. The best pump protection is selecting the right pump for the application. The next best pump protection is proper installation. And the easiest pump protection is regular maintenance. Pump Selection Selecting the correct high pressure pump for the application will offer the best pump protection. Trying to get a pump ...


    By Cat Pumps

  • Langham Industrial Controls Flow and Pressure Adaptor for Monitoring Customer Water Supply Performance

    The success of our manifold Pressure Adaptor has led to the development of our most recent product, the Manifold Flow and Pressure Adaptor. Langham Industrial Controls Ltd has recognised that there is a need within the water industry to measure both flow and pressure at the boundary box. This can now be achieved by connecting a manifold meter and dual channel data logger to the Langham ...

  • Monitoring and modelling of the effects of process settings and screw geometry on melt pressure generation in polymer extrusion

    Melt pressure is one of the most important process parameters in polymer extrusion and is closely related to product quality. However, it is not directly controllable and may be affected in a complex manner by changing other process operating conditions such as screw speed and barrel set temperatures. The ability to predict such parameters would be a powerful tool to aid process design and ...


    By Inderscience Publishers

  • Automatic Back-Pressure Saturation Device for Triaxial Testing

    If back pressures are applied to unsaturated triaxial specimens too rapidly, the specimens may be overconsolidated by the temporary application of effective stresses that are higher than intended. This is dangerous because the strengths of the specimens will be higher than they would be without this inadvertent overconsolidation. An automated device has been developed to ensure that the specimen ...


    By ASTM International

  • Trash Screen Monitoring in Falkirk

    Falkirk County Council, Scotland Supply and installation and maintenance of a Trash Screen blockage and Flood Warning system, 2006 - ongoing Hydro-Logic was appointed by Falkirk County Council to supply, install and commission a series of sites where there were concerns over flooding. The systems were deployed to supply alarms to a central control office at Falkirk ...

  • Area Monitoring: Diffusion Sampling

    Indoor and outdoor gas hazards that exist in open areas are usually monitored using diffusion-type sensors. A diffusion sensor has no active sample-drawing system; diffusion sensors rely on the ambient air movement and pressure to deliver the sample to the sensing element. Diffusion-type sensors are a reliable and cost-effective way to monitor open area gas hazards. When installing diffusion ...

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Weather Data for Noise Monitoring

    “Weather conditions are the single largest variable factor in how sound travels over large distances,” says Steve Bilawchuk principal partner and engineer at ACI Acoustical Consultants Inc. “Wind speed and wind direction are of crucial importance.” ACI is an acoustical engineering consulting company based in Alberta, Canada, which uses ...

  • Oxygen Monitors for the New Millennium

    Oxygen monitors have become a required piece of safety equipment for many industrial and laboratory environments, where the release of certain toxics can create an area unsafe for living beings (human or animal).  When making a purchasing decision on any oxygen detection monitor, one need look no further than the sensor cell found at the heart of the monitor.  While each oxygen ...

  • Monitoring louisiana’s levees

    Background The natural disaster in New Orleans was exacerbated by the fact that the city’s levees broke Two towns SE of New Orleans, Braithwaite and Scarsdale, depend on levees which were also damaged by Hurricane Katrina Levees have been repaired to meet minimum protection requirements, and additional strengthening work continues Redirect water from behind ...


    By The OTT Hydromet Group

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you