pressure pump blower Articles

  • 5 Must Do Steps to Keep Your Jet Aeration System Running Smoothly

    Sustained low dissolved oxygen levels in an aeration tank can cause a host of problems — including difficulties in maintaining soluble BOD (biochemical oxygen demand), reduced nitrogen removal efficiency, and challenges with biomass separation. A jet aeration system offers a solution, utilizing both a pump and blower to meet the oxygen transfer requirements of a biological process. A well ...


    By KLa Systems, Inc.

  • SVE and Air Sparging

    Stage 1: The system is a PLC controlled plant equipped with telemetry. Rotary Lobe blowers were used to abstract vapour contaminated with chlorinated hydrocarbons and a similar high pressure blower was used to inject air via solenoid valves individually controlled by the PLC. Extracted vapour was treated in large GRS 2 tonne vapour-phase activated carbon vessels.Stage 2: The system comprised ...


  • KLa Systems Offers “Retrofit Opportunities”

    KLa Systems is in a unique position to assist industries in meeting the challenges of production expansion and optimizing energy usage in their wastewater treatment facilities. Our Slot Injector system can easily retrofit all types of diffuser systems including conventional jet aeration systems within existing tanks and basins. Higher (15-60%) oxygen transfer rates can be achieved using the ...


    By KLa Systems, Inc.

  • Sweeter smelling solution at grampian prepared meats

    Chicken blood was previously drawn from the collection sump in the production area, via a vacuum pump, to fill a pressure vessel. This blood was then transferred into a 30 tonne holding tank by a blower and the necessaryventing of this system to atmosphere gave rise to the odour and required addressing ahead of the 2007 cut-offdate for compliance with the latest regulations. Mono’s solution was ...

  • KS 1000 compact stripper case study - IEG Technologie GmbH

    VOC-contaminated groundwater is treated in a 2-stage low-profile compact vacuum stripper (CVS). A negative pressure blower applies a vacuum to the treatment chamber. In this chamber a 2-stage stripping reactor is located and the stripping air is directed to the upper tray. The groundwater loops around on the upper tray along designate barriers, while the stripping air is being pulled through the ...


    By IEG Technologie GmbH

  • Power plant converts gray water into boiler feedwater using hero technology

    The Facility The Bajio Power Project is a 600 MW combined cycle project owned by the Energía Azteca, a Mexican project company jointly owned by InterGen and American Electric Power. The build, own and operate facility is in commercial operation near the municipality of San Luis de la Paz in the state of Guanajuato, approximately 160 miles from Mexico City. In 1999, ...

  • STP Plant Supplier in Chennai – sewage treatment Plant in Chennai Tamilnadu

    RRR ENVIRO SYSTEMS STP plant supplier in Chennai Tamilnadu .We are the Manufacturing and supply of all the types of STP Plant like ASP & FBBR Methods in 10 KLD STP,50 KLD STP, 100 KLD STP, 150 KLD STP, 200 KLD STP, 300 KLD STP, 400 KLD STP, 500 KLD STP, 600 KLD STP with the best rates available in the Indian Market. Process Of STP plant The sewage shall be passed through the screen chamber to ...


    By RRR ENVIRO SYSTEMS

  • Thermocline-driven desalination: the technology and its potential

    Seawater desalination technology is emerging as freshwater requirements are alarmingly increasing all over the world. Conventional technologies such as reverse osmosis and multistage flash evaporation have their limitations, such as chemical treatment and scaling. Low-Temperature Thermal Desalination (LTTD) is an attractive technology with vast potential. It makes use of the ocean temperature ...


    By Inderscience Publishers

  • Creative Service Solutions - Case Study

    A paper mill in Finland suffered the complete failure of a large four-stage vacuum blower. Creative problem solving resulted in a repair time of only seven days. The maintenance team built a functional blower by using parts from three outdated machines. The combined efforts of Sulzer and of the paper mill’s own engineers made it possible. The paper industry has to cope with a ...


    By Sulzer

  • Innovative Multi-Media Filter – Continuous Backwash Filter

    The disadvantages of conventional MMF based pretreatment Conventional pretreatment is based on multimedia filters (MMF) implemented in large scale desalination plants. Although this filtration method is well proven and provides reliable filtration efficiency, it conceals an inherent drawback, the disadvantages of which relate mainly to the backwashing mechanism. The ...


    By IDE Technologies

  • Multifunctional Well Implemented for In Situ Remediation of Hydrocarbon Contaminations in Soil and Groundwater

    Abstract A recently developed Multifunctional Well has been implemented for the remediation of subsurface contamination caused by hydrocarbon spills. Four different remediation processes can be operated within the same well. At optimal efficiency of each remediation process, successive treatment of the capillary fringes, the vadose zone, and the aquifer can be accomplished. Each treatment ...


  • KLa Slot injector™ Aeration system assists cheese & Whey production plant solve its Nitrogen discharge challenge - Case Study

    The Challenge A gourmet cheese, whey protein, and lactose production facility located in the Midwest had been utilizing a land application system for effluent discharge for over 40 years. Using a combination of ridge and furrow and spray irrigation, the plant had many years of success applying their wastewater to the land. However, as the gourmet cheese products gained in popularity along ...


    By KLa Systems, Inc.

  • Insitu mixing of dry and slurried reagents in soil and sludge using shallow soil mixing

    Introduction Recent implementation for the Federal Hazardous Waste Land Disposal Restrictions (LDR) to RCRA and USEPA's willingness to approve on-site treatment and/or containment has allowed in situ treatment methods to become viable options in site remediation. Shallow Soil Mixing (SSM) is one of several in situ mixing techniques now commercially available for use in on-site treatment of ...


    By Geo-Con, Inc.

  • A breath of fresh air - Wet scrubbing eliminates odors associated with processing discarded liquid from cheese manufacturing

    When International Ingredient Corp.’s drying plant in Monroe, WI, opened in 1994, it was the first plant designed specifically for large-scale drum drying of dairy products for the feed industry. At that time, its only neighbor was a cheese producer. International Ingredient used a land spread technique to process the discarded liquids resulting from its neighbor’s cheese ...


    By Bionomic Industries Inc.

  • Gravity self-backwashing filters

    The filtration of make-up and side-stream water in closed cooling circuits, operated through cooling towers, is a fundamental step to ensure safe and continuous operations in a power plant. Water - required in large amounts for this application - should not be wasted, and the potential damages deriving from a poor treatment must be avoided at all cost. BONO ARTES has developed a technical ...


    By Artes Ingegneria SpA

  • Hundreds of Options Facing Power Plants Purchasing New or Upgrading

    The wet calcium (lime and limestone) process is only one option for removing SO2. Dry systems, ammonium sulfate, seawater, amine and other processes are also alternatives. Assuming that the purchaser has decided to purchase a new or upgrade an existing wet calcium FGD system, he must then make hundreds of decisions about processes and components. These systems represent up to 15 percent of the ...


    By The McIlvaine Company

  • Case study - drain field renovation with RetroFAST

    Engineer: Dick Bartel, Point One Engineering Distributor: Frank Hay, Pinnacle Environmental Technologies, Inc. Location: British Columbia, Canada Dick Bartel approached Frank Hay in mid August 2002 looking for alternatives for repairing a neighbor’s biologically-failing conventional septic system. Bartel had originally looked into ...


    By Bio-Microbics, Inc.

  • Abrasives case study - Chromalloy

    Chromalloy, Drilling Fluids Division, produces barite at its Houston, TX facility. Chromalloy was using standard elbows on its 4- and 5"-diameter pneumatic conveying lines, which carry barite from the grinding mill to the storage tanks where it is stored prior to loading into hopper cars and bulk trucks. Figure 1: A cross section of the new type of elbow in use at Chromalloy. Suspended ...


    By HammerTek Corporation

  • Art or Science?

    The choice between dilute phase pneumatic conveying and flexible screw conveying is not always clear Everyone has rules of thumb when it comes to choosing a conveying system — rules based on bulk material characteristics, required flow rates and distances, source and destination, plant configuration, and other variables. But those with experience in all types of systems will tell ...


    By Flexicon Corporation

  • Soil Vapor Extraction (In Situ)

    Introduction Soil vapor extraction (SVE) is an in situ unsaturated (vadose) zone soil remediation technology in which a vacuum is applied to the soil to induce the controlled flow of air and remove volatile and some semivolatile contaminants from the soil. The gas leaving the soil may be treated to recover or destroy the contaminants, depending on local and state air discharge regulations. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you