process analyser system Articles

  • Monitoring the oxygen content in bio-methane-to-grid supply

    Orbital utilise the EC91 ATEX oxygen analyser from Systech Illinois to accurately monitor the oxygen content in the purified bio-methane gas prior to it being injected into the national grid gas network In September 2010, Orbital installed the gas monitoring and treatment plant on the UK’s very first large-scale bio-methane-to-grid production facility. This site was designed specifically to ...


    By Systech Instruments Ltd

  • How a contract research lab advanced its polymer characterization capabilities

    Realizing the Advantages of Ultra-High-Performance Size Exclusion Chromatography Compared to GPC Intertek is a global provider of quality and safety services designed to help businesses improve products, assets and processes, overcome market constraints and reduce risks. From auditing and inspection, to testing, training, and certification, Intertek enables customers to meet end ...


    By Waters Corporation

  • The Rationale for Accelerating Regionally Focused Climate Intervention Research

    Abstract Ten years ago, Paul Crutzen asked whether the time had come to consider undertaking research into intentionally intervening in the climate system so that it might be considered a policy option comparable to reducing emissions for limiting human-induced climate change. Crutzen’s article pointed out how little progress had been made in reducing emissions and suggested that ...


    By Climate Institute

  • Energy and exergy analyses of vacuum drying process of pine timbers

    In this study, an experimental system for the vacuum drying of timbers is designed. Experiments in the different temperature, pressure and the residence time in vacuum are carried out. The drying experiments are conducted at three different drying temperatures varied between 40°C and 60°C. The drying experiments are conducted at three different pressures varied between 60 kPa and 80 kPa. The ...


    By Inderscience Publishers

  • Energy and exergy analyses of a steam reforming process for hydrogen production

    Hydrocarbon steam reforming is an important process for hydrogen production. In petroleum refineries, steam reforming is most commonly used for hydrogen production from naphtha and light hydrocarbon gases (methane, ethane and propane). Since the hydrocarbon steam reforming system is one of the highest energy intensive systems in a petroleum refinery it should be directed to a more efficient use ...


    By Inderscience Publishers

  • Analysing a system of systems characterisation to define system of systems engineering practices

    Even though there is no clear accepted definition for SoS, the term is widely recognised and typically refers to large-scale or complex systems that provide a set of capabilities. Since SoS is still a fairly infant field, there is also much discussion on the tools, methodologies, thought processes and analysis used to design these massive systems. The purpose of this paper is to describe five ...


    By Inderscience Publishers

  • Multiple gas impurity analyses and verification for semiconductor process tools

    With the increased emphasis on the purity of cleaning, etching and treatment gases by the semiconductor industry, advanced analysis instrumentation is required to monitor the electronic specialty gases and to verify the performance of process tools and components. This paper describes new instrumentation and software specifically designed to accomplish ppb level gas analyses in times as short as ...


    By CIC Photonics, Inc.

  • Popular analysers are portable and rentable

    The MCERTS approved HORIBA PG-250 has been one of the most popular  instruments in Ashtead Technology’s fleet of rental equipment for a number of  years. Jay Neermul, the company’s Environmental Product Manager says “This  is because it is able to analyse CO, NO/NOx, SO2 and CO2 using standard  reference methods in a portable instrument that can be easily and ...


    By Ashtead Technology Ltd

  • Analysing four of the most contaminated foodstuffs

    Food adulteration has been around since the Victorian times when cheese was often coloured with lead salts, beer and milk were watered down and flour was bulked out with chalk dust or ground bones [1]. Governments apply stringent legislation and quality standards to food products but the practice of adulteration, driven by greed and profit, is still seen. ...


    By Specac Limited

  • Comparing modelling techniques for analysing urban pluvial flooding

    Short peak rainfall intensities cause sewer systems to overflow leading to flooding of streets and houses. Due to climate change and densification of urban areas, this is expected to occur more often in the future. Hence, next to their minor (i.e. sewer) system, municipalities have to analyse their major (i.e. surface) system in order to anticipate urban flooding during extreme rainfall. Urban ...


    By IWA Publishing

  • Energy and exergy analyses of a spark-ignition engine

    In this paper, the performance of an internal combustion engine is evaluated at the steady-state condition by application of energy and exergy analysis using the experimental test results. The energy and exergy balances are calculated at different engine speeds. The results show that the heat rejection of energy and exergy flow increases with increasing engine speed. The exergy efficiencies are ...


    By Inderscience Publishers

  • The importance of maintaining your fixed gas analyser

    Plant technicians rigorously check for contaminates within the digester and ensure that the performance is optimised but maintaining the gas analyser monitoring the whole process is often overlooked.  Many analysers are used in harsh and potentially explosive environments and so it is of paramount importance that the operation runs smoothly and safely. With simple maintenance of your ...


    By Geotech

  • Should your company be conducting life cycle analyses?

    Many companies have already answered yes to that question – for a combination of reasons typically related to stakeholder interest, key customer demands, public perception, and competitive positioning.  In fact, life cycle analysis (LCA) has increasingly become an important tool in mature corporate sustainability programs, providing organizations with a consistent methodology for ...


    By Trinity Consultants

  • Analysing the sensitivity behaviour of two hydrology models

    Recently, the New Morris Method has been presented as an effective sensitivity analysis tool for mathematical models. The New Morris Method estimates the sensitivity of an output parameter to a given set of input parameters (first-order effects) and the extent these parameters interact with each other (second-order effects). This method requires the specification of two parameters (runs and ...


    By Springer

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Milton Keynes based Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Quantitech Ltd

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • Risk analysis of information systems by event process chains

    Information and Communication Technology (ICT) has an important impact on critical infrastructure operation. However, the current use of risk analysis techniques has reached its limits when analysing these systems at least in practical terms. The application of extended event process chains (EPC) bypasses some of the difficulties, as they model business processes within an information system ...


    By Inderscience Publishers

  • Effect of side-stream phosphorus recovery on biological phosphorus removal performance investigated by chemical and microbial analyses in a novel BNR-IC process

    The aim of this study was to assess the effect of side-stream ratio (SSR) on performance of phosphorus (P) removal and recovery in a novel process linking biological nutrients removal (BNR) and induced crystallization (IC). Results showed that P removal efficiency was significantly enhanced when given an appropriate SSR, resulting in effluent P concentrations decreasing from 0.75 to 0.39 mg/L ...


    By IWA Publishing

  • Optimising logistic processes with rapidM2M

    When delivering products, it is crucial to keep an eye on GPS positions, delivery dates as well as the quality of the products. Machine-to-Machine technology enables you to do so from your office desk. rapidM2M is a technology specially developed for the simple realisation and stable operation of Machine-to-Machine solutions and enables to transmit important data like GPS positions or ...

  • Analysing the wind turbine innovation systems in The Netherlands and Denmark using the cyclic innovation model

    This paper analyses the development of wind power in The Netherlands and Denmark in the period 1973-2000 with the cyclic innovation model (CIM). CIM regards innovation as a cyclic process in which different actors constantly develop and exchange knowledge through four different types of cycles: hard science cycle, soft science cycle, integrated engineering cycle, and differentiated valorisation ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you