process analyzer system manufacturer Articles

  • The climb to the top

    Back in the late 1980’s when market drivers created the cost-effective option of using above-ground circular tanks for industrial activated sludge processes, there were some early valuable lessons for both aeration equipment manufacturers and plant operators. As production plants got away from in-ground basins, one of the more simple innate operational checks became more challenging; ...


    By KLa Systems, Inc.

  • How a contract research lab advanced its polymer characterization capabilities

    Realizing the Advantages of Ultra-High-Performance Size Exclusion Chromatography Compared to GPC Intertek is a global provider of quality and safety services designed to help businesses improve products, assets and processes, overcome market constraints and reduce risks. From auditing and inspection, to testing, training, and certification, Intertek enables customers to meet end ...


    By Waters Corporation

  • How LIMS Facilitates Lean Manufacturing Processes in the Laboratory

    (Reprinted from American Laboratory September 2006)   Despite the well-documented success of lean manufacturing in the past decades, by and large, laboratories have been slow to adopt lean manufacturing principles to help ...


    By STARLIMS Corporation

  • Online Process Analyzer Installed at F.J. Horgan WTP to Monitor Chloramination

    Construction was completed on the City of Toronto's F.J. Hor-gan Water Treatment Plant in 1979, more than 60 years after chloramine had first been used to disinfect drinking water in an Ottawa plant. By then there was little debate about the benefits of chloramination and it was incorporated into the new plant's design as part of the disinfection process. Chloramine is more stable than free ...

  • Curren Hits the Bull`s Eye Using Online Process Analyzers

    Howard F. Curren Advanced Wastewater Treatment Plant improved its efficiency by upgrading to online process monitoring and control. The Howard F. Curren Advanced Wastewater Treatment Plant is one of the largest nitrification/denitrification filter plants in the world with a design capacity of 96 million gallons per day average daily flow. It serves about 110,000 accounts in the City of Tampa and ...

  • Heat recovery system at a flooring manufacturer - Case study

    Flooring Manufacturer Reduces Operating Costs with a Customized Heat Recovery System Rising energy costs effect your bottom line. You don’t have to be a CFO to understand that energy costs are high and show little sign of relief these days. To combat the rising cost of natural gas, many companies that operate air pollution control systems are beginning to look at methods that economically ...

  • Recuperative oxidizer - Boat engine manufacturer

    Epcon has extensive experience in designing and building Thermal Oxidizers for Engine Cell Testing. The Problem A major Boat Engine manufacturer needed to lower emissions from engine cell testing. All motors, whether automobile or boat, are Pre-Tested for several hours prior to shipping. The emissions from these Engine Cells are mostly Carbon Monoxide and unburned fuel, with ...


    By Epcon Industrial Systems, LP

  • Case Study - Batch Chemical Manufacturing

    Equipment: Refurbished, warranted Regenerative thermal oxidizer RTO; (10,000 scfm) (1994 vintage)Installed: 2002Location: New Jersey Project Details:A batch chemical manufacturer required emission controls as part of a process expansion in their New Jersey facility. Emissions from the new process would exceed their emission cap. They had purchased a new RTO at a ...


    By Kono Kogs, Inc.

  • Integrated Engineers Case Study: Circuit Board Manufacturer

    A circuit board manufacturer in southern California was not able to achieve the discharge levels of copper and nickel with their existing system of coagulant, anionic and cationic flocculants and metal precipitant treatment process followed by lamella plate clarification. The previous treatment process developed a settled sludge that had poor shear characteristics and required further coagulant ...


    By Integrated Engineers Inc.

  • Chocolate, Candy and Snack Cake Manufacturer - Case Study

    A world renowned sweets manufacturer located just outside the heart of a major city in Mexico, produces sweet marshmallow chocolate-covered products. Faced with space limitations and increased discharge regulations, this processor needed to find a primary wastewater treatment system that would solve their regulatory issues, be expandable for the ever-growing company and fit within a small ...

  • Flooring manufacturer reduces operating costs with a customized heat recovery system - Case Study

    Rising energy costs effect your bottom line. You don’t have to be a CFO to understand that energy costs are high and show little sign of relief these days. To combat the rising cost of natural gas, many companies that operate air pollution control systems are beginning to look at methods that economically recover heat for use somewhere else in their manufacturing operations. One leading ...

  • Actio updates MSDS Vault materials management system, to lower regulatory risks for manufacturers

    Vault helps companies manage Environmental Health and Safety (EHS) compliance and mitigate regulatory risks. Actio materials information management software includes enhanced user interface, direct integration with Actio supply chain communication tools and supplier data collection modules, automated revision management, screening materials against hundreds of global regulation lists, and snap-on ...


    By Actio Corporation

  • Making manufacturing more sustainable - Subcommittee E60.13 lays groundwork for standards

    A new ASTM International subcommittee has begun work on standards that address sustainable manufacturing. Sometimes zero is not zero. Case in point: Manufacturer X sends no byproducts or waste to landfills or to incinerators. Manufacturer Y doesn’t dump waste in landfills, yet it does opt to burn refuse for energy. Both claim they have “zero landfill” programs. ...


    By ASTM International

  • Global aerospace manufacturer cuts material-approval time by 75%

    Automating workflows around today’s detailed materials data gets planes off the ground quicker, according to Actio. The aerospace industry is known for inventing, driving, and implementing advanced technology to solve complex engineering problems. Processes are implemented throughout design and manufacturing to ensure that chemicals, parts, and systems: comply with design ...


    By Actio Corporation

  • Energy Savings on Process Heating Units Case History

    The Customer This specialty chemical company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The Project The company was increasing the ...

  • Application note: The Sievers InnovOx TOC Analyzer: Wastewater Monitoring

    Overview Wastewater is used water. It can include substances such as human waste, food scraps, oils, soaps, and chemicals. Manufacturing industries as well as wastewater municipalities must comply with the United States Environmental Protection Agency’s (USEPA) Clean Water Act (CWA) regulations. In order to discharge treated wastewater and be compliant with the CWA, a ...


    By GE Analytical Instruments

  • Pasco County Uses Total Life Cycle Costing to Select Chloramination Analyzers

    Pasco County, Florida Water Utilities serves its customers with water from its 58 permitted wells blended with the water supplied by its large regional supplier, Tampa Bay Water. In 2002 Tampa Bay Water converted to monochloramine disinfection because of its advantages over free residual chlorine. Monochloramine is more stable and better extends the disinfectant residual throughout the ...

  • Drying plastic resin pellets in injection- Molding & Extrusion processes case study

    Application Moisture concentrations are measured in the dry purge air used to remove moisture from a hopper containing plastic resin pellets used in injection-molding and extrusion processes. Problem Moisture contaminates the plastic resin pellets causing several quality problems in the finished plastic products. Moisture causes clear ...

  • Michelmersh Group Plc uses eSight to monitor energy efficiency within manufacturing sites across the UK

    Established in 1842, the Michelmersh Group is formed from five brick manufacturing companies located across the UK; Blockleys, Michelmersh, Charnwood, Duntons and Taperell Taylor. The companies produce a range of products including facing and special-shaped bricks through to roof tiles. Background The Michelmersh group produces over 75 million bricks per year. The process of brick ...


    By eSight Energy

  • 50 GPM Parallel Plate Clarifier for raw water treatment at a chemical manufacturing plant

    Challenge A chemical manufacturing company needed to clarify surface water that was being drawn from a local creek for use as a cooling agent in their manufacturing process. The existing system was 30-years old, corroded, and not very adept at handling solids after separation from the water. Space requirements were a limiting factor in the installation. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you