process formaldehyde monitoring Articles

  • Embalmers risk dangerous exposure to Formaldehyde

    Embalmers can be at risk of dangerous exposure to Formaldehyde. ...


    By PPM Technology

  • Pollution monitoring in Cement Industry

    The rising use of waste based fuels in the cement industry, both for economic and Environmental objectives, combined with the strengthening of air emission regulations around the world is pushing many operators to face a wider list of pollutants to monitor this, with associated costs. The design of appropriate solutions meeting local regulation is the key to maximize the cost benefit of the fuel ...


    By Environnement S.A

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Nature’s Own - Biofiltration process offers promise of (near) energy-free pollution abatement

    A filter could be described as any substance through which liquid is passed to remove suspended impurities. Although a “biofilter” is actually not a filter, “biofiltration” is on the threshold of finding a market as a compliance solution for air pollution regulations after a number of false starts. Biofilters have long been used as a means for reducing objectionable odors in Germany, the ...


  • A Case Study in Implementation of the National Emission Standard for Hazardous Air Pollutants for the Portland Cement Industry at a Major Source

    The regulations at 40 CFR 63, Subpart LLL are commonly known as PC MACT because the rule establishes the maximum available control technology for hazardous air pollutants (HAPs) from portland cement plants in the United States. There are 188 HAPs specified in Section 112 of the Clean Air Act Amendments of 1990. Two classifications of HAP emitters are specified in 40 CFR 63. Major sources of HAPs ...


    By Trinity Consultants

  • `Green Buildings` can create problems with IAQ

    The recent trend towards energy conservation measures have in some cases led to airtight building construction that can often create problems with Indoor Air Quality (IAQ). Some 'green buildings' (also known as ‘green construction’ and ‘sustainable buildings’) have ignored the issue of IAQ in pursuit of energy saving measures. Ventilation systems are set to minimize the ...


    By PPM Technology

  • Fixed multi-parameter gas detection system can ensure industrial facilities are safe from hazardous or toxic gases

    Industrial workplaces are likely to come across one or more hazardous or toxic gases. Combustible gases such as methane are highly dangerous because they can cause large and fatal explosions when ignited. Other problem areas when working in industry are carbon monoxide (which poisons the cardiovascular system), oxygen deficiency, and elevated levels of other gases and pollutants, depending and ...


    By PPM Technology

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Sonic nozzles for gas calibrators, when simplicity provides accuracy!

    Gas analyser’s calibration is a task required in many applications according to either legislation or quality systems management. This is the case for Air Pollution Monitoring or Continuous Emissions Monitoring devices installed in cabinets, for continuous analysis in remote locations. Measurements in traces range are performed and analytical devices specifications need to be validated and ...


    By LNI Swissgas

  • Cotton, cashmere, chemicals … what really goes into making our clothes?

    Sensitized to growing concern, manufacturers are paying increased attention to hazardous substances in our wardrobe’s supply chain. The U.S. Federal Trade Commission has something to say about what you wear. While not a fashion arbiter and unable to advise on attire for family gatherings, the FTC oversees what appears on the labels inside your ...


    By Ensia

  • Air uality in IVF Labs

    Since the birth of the first baby from in-vitro fertilisation (IVF) in 1978, Assisted Reproductive Technology (ART) has grown in importance as techniques and success rates have continued to improve. Put simply, IVF involves mixing sperm and egg in a lab to create an embryo which is then replaced in a woman's womb to develop normally with success being measured in terms ...


    By Commercial Air Filtration

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Greening the Built Environment

    ASTM Standards and Products Form the Foundation of Sustainable Construction Efforts Today, a major focal point for the worldwide building industry is the growing demand for sustainable construction. Sustainable, or “green,” construction is focused on the more effective use of resources and ultimately the creation of healthier, energy efficient, more environmentally ...


    By ASTM International

  • Top International News in Chemical Policy and Regulation

    AUSTRALIA Australia Releases Third Consultation Paper Concerning NICNAS Reform: On April 29, 2016, the National Industrial Chemicals Notification and Assessment Scheme (NICNAS) published the third consultation paper on its  ...


    By Acta Group

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you