process gas analyser Articles

  • Multiple gas impurity analyses and verification for semiconductor process tools

    With the increased emphasis on the purity of cleaning, etching and treatment gases by the semiconductor industry, advanced analysis instrumentation is required to monitor the electronic specialty gases and to verify the performance of process tools and components. This paper describes new instrumentation and software specifically designed to accomplish ppb level gas analyses in times as short as ...


    By CIC Photonics, Inc.

  • The importance of maintaining your fixed gas analyser

    Plant technicians rigorously check for contaminates within the digester and ensure that the performance is optimised but maintaining the gas analyser monitoring the whole process is often overlooked.  Many analysers are used in harsh and potentially explosive environments and so it is of paramount importance that the operation runs smoothly and safely. With simple maintenance of your ...


    By Geotech

  • FTIR resolution requirements for industrial gas analyses

    FTIR Spectroscopy FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epitreatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D faciltities, FTIR is applied to combustion ...


    By CIC Photonics, Inc.

  • Gas analysers support management of Swindon fire

    The capability to convene a multi-agency Air Quality Cell (AQC) was established in England in 2009 following the Buncefield Oil Storage Depot incident. A review of this event identified the need to rapidly co-ordinate the acquisition, analysis and interpretation of air quality data in major incidents. Arrangements have been made in England to bring together experts from the Environment Agency ...


    By Quantitech Ltd

  • Energy and exergy analyses of a steam reforming process for hydrogen production

    Hydrocarbon steam reforming is an important process for hydrogen production. In petroleum refineries, steam reforming is most commonly used for hydrogen production from naphtha and light hydrocarbon gases (methane, ethane and propane). Since the hydrocarbon steam reforming system is one of the highest energy intensive systems in a petroleum refinery it should be directed to a more efficient use ...


    By Inderscience Publishers

  • Popular analysers are portable and rentable

    The MCERTS approved HORIBA PG-250 has been one of the most popular  instruments in Ashtead Technology’s fleet of rental equipment for a number of  years. Jay Neermul, the company’s Environmental Product Manager says “This  is because it is able to analyse CO, NO/NOx, SO2 and CO2 using standard  reference methods in a portable instrument that can be easily and ...


    By Ashtead Technology Ltd

  • Silent sentinel role for static gas analyser at United Utilities

    Biogas produced by the United Utilities anaerobic digestion sludge plant at Lancaster (Stodday) waste water-treatment runs a brand new 525kW combined heat and power (CHP) engine generating electricity and now operating 24/7. It joins an existing 325kW engine already in service for three years. In addition to biogas from the Stodday mesophilic anaerobic digester, a new enzymic hydrolyser increases ...


    By Geotech

  • FTIR analyser improves anaesthetic gas detection at Torbay Hospital

    A unique gas measurement technology has enabled South Devon Healthcare’s Pharmacy Manufacturing Unit (PMU) at Torbay Hospital to conduct highly effective and detailed analysis of anaesthetic gases in a variety of hospital locations. The primary function of the PMU’s quality control department is to check active ingredient levels and sterility in manufactured pharmaceutical ...


    By Gasmet Technologies Oy

  • Analysers and next generation SRU control

    The history of on-line process analytics is a relatively short one. Development was driven by the need for process control of high value hydrocarbonbased products. The first on-line analyser applications came during the second war. Rapid development came in the 1970s with the advent of the microprocessor and resultant chemometric techniques. Led by Phillips Petroleum, Union Carbide and Dupont ...

  • Technical and economic analyses of a hydrogen-fed gas turbine with steam injection and co-generation

    Enel has been working on a hydrogen programme dealing with both hydrogen production and uses. The first phase deals with a hydrogen-fed, gas turbine-based co-generative cycle, in which steam injection in the gas turbine itself is adopted in order to couple high process efficiencies with very low nitrous oxide emissions. This paper presents the main results of the co-generative cycle thermodynamic ...


    By Inderscience Publishers

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Milton Keynes based Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Quantitech Ltd

  • Case study - Geotech’s first GA5000 landfill gas analyser takes 100,000 readings for SUEZ environnement

    Geotech’s first GA5000 analyser, manufactured three years ago, was recently spotted in the company’s calibration rig.  This portable landfill gas monitor was the first production unit of the newly launched GA5000 gas analyser range and has prompted Geotech to look into the analyser’s life since then. The analyser was on its sixth service since manufacture, under ...


    By Geotech

  • Principal Component Analyses of Groundwater Chemistry Data During Enhanced Bioremediation

    Abstract  A bioremediation project has been monitored for two years at a former sour gas plant site that had ethanolamine, glycol and their degradation products in the subsurface. The active enhanced bioremediation program consisted of dewatering and bioventing. An extensive groundwater monitoring program mapped the distribution of chemical species. Principal component analysis was used to ...


  • FTIR Emissions Analyser helps manage UK Power Station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Gasmet Technologies Oy

  • FTIR emissions analyser helps manage UK power station

    A Gasmet FTIR multiparameter emissions monitor at Thetford power station is being used to demonstrate that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet’s UK distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are displayed ...


    By Quantitech Ltd

  • Carbon dioxide monitoring for food processing

    Application Carbon dioxide monitoring for food processing Equipment G100 CO2 analyser Location Okehampton, UK Customer Kerry Foods Requirement The customer was looking for a CO2 monitor to detect small changes in CO2 levels in the headspace above food products ...


    By Geotech

  • Production of methane gas from organic fraction municipal solid waste (OFMSW) via anaerobic process: application methodology for the Malaysian condition

    Solid waste management in Malaysia is confronted with many problems, including low collection coverage, irregular collection services, inadequate equipment used for waste collection, crude open dumping and burning without air and water pollution control systems, inadequate legal provisions and resource constraints. These problems have various effects on the development of the solid waste ...


    By Inderscience Publishers

  • MCM’s heated Silicon Sensor Moisture Analyser against Aluminium Oxide and Oscillating Crystal Moisture Analysers, during Molecular Sieve Test Runs at St Fergus, Scotland

    Abstract Methods for dehydrating natural gas using molecular sieves (mol sieve) are well established. Many strategies have been developed with the intention of extending mol sieve lifetime and preventing unplanned shut-downs of dehydration units. The amount of adsorbent required in such dehydration processes is determined by the water content in the feed, the end-of-run (EOR) water ...

  • Comparison and analysis of the expansion process in a CO2 transcritical cycle

    The isentropic and isenthalpic expansion processes in a CO2 transcritical cycle were analysed thermodynamically. It was found that the effective refrigeration capacity of the cycle with the isentropic expansion process is higher than the cycle with the isenthalpic expansion process. The increment is slightly larger than the expansion work recovered because of the transcritical nature of the ...


    By Inderscience Publishers

  • Case study - Palm oil processing in Malaysia

    Application Biogas from palm oil Equipment GA3000, now superseded by the GA3000 PLUS Location Malaysia Customer EnviroEquip Requirement ...


    By Geotech

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you