process gas analyzer Articles

  • Analyzer underpins growth of container inspection company

    After a career as a customs officer in the Netherlands, Wim van Tienen was well aware of the toxic gas hazards presented by some freight containers, so in 2009 he started a company, Van Tienen Milieuadvies B.V., offering gas analysis and safety advice. The company grew quickly and now employs 23 staff. Wim attributes a large part of this success to the advanced FTIR gas detection and analysis ...


    By Gasmet Technologies Oy

  • New Process Gas Analyzer for the Measurement of Water Vapor

    KEYWORDS TDLAS, WMS, Laser Spectroscopy, Water Vapor Measurement, Gas Analyzer ABSTRACT A new analyzer for the measurement of water vapor concentration based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) was developed. The water-vapor line at 1854-nm was selected for the measurement, and the performance of the system was evaluated on different ...

  • Natural Gas Processing Case Study

    The Customer The Company is an exploration and production company that builds natural gas reserves through the acquisition and development of oil and gas assets across the U.S. They are one of the largest producers of natural gas in the Nation. The Process The Company uses multiple scrubbers to clean out the impurities of the natural gas that they ...

  • The Seven Deadly Sins of Process Analyzer Applications

    Abstract On-line process gas analyzers comprise a relatively small proportion of the capital investment in a grass roots project but they require detailed attention if they are to be successfully implemented and fully exploited. The chain is long and the mistakes are many. It runs from front end engineering design, to EPC detailed design, through systems integration, selection of technique ...

  • Reducing the Detection Limits for a Process Moisture Analyzer

    KEYWORDS Moisture Analyzer, Piezoelectric Sensor, Smart Transmitter, Internal Verification, Quartz-Crystal Microbalance ABSTRACT Piezoelectric moisture analyzers have been used in the process industry for over two decades. While this is an older technology for measuring moisture in gas phase samples, it is still one of the most reliable in ...

  • Online Analyzers Improve Control of Chloramination Processes in Milwaukee

    The Milwaukee Water Works is a national leader in providing high quality drinking water and monitoring water quality. Since 1998, it has invested $227 million in its infrastructure, from treatment plants to distribution systems, to ensure high quality drinking water and reliable supply. The Milwaukee Water Works treats Lake Michigan water with Ozone gas as a primary disinfectant because it ...

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

  • Leak detection in semiconductor fab gas processes

    Problem Statement Often times in semiconductor fabs moisture levels are monitored to ensure that products aren’t damaged by excess moisture in the process. If there are above normal levels of moisture, pinpointing the source of that moisture can be difficult. The moisture could be evolving from impurities in gas tanks or leaks in the sampling lines. One way to avoid downtime ...


    By CIC Photonics, Inc.

  • 5th-Generation Thermox WDG Flue Gas Combustion Analyzer

    "For more than 40 years, we have been a leader in combustion gas analysis," says Mike Fuller, divison VP of sales and marketing and business development for Ametek Process Instruments, "and we believe the WDG-V is the combustion analyzer of the future." WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as ...

  • Research NOx Analyzers

    ECO PHYSICS provides environmental experts with exceptionally sensitive and precise NOx measurement instruments. Please take a look at our newest press release on our research NOx analyzers below. Bound by the same laws of nature, ecology and physics are close associates in an on-going battle to preserve air quality around the globe. One of our planet's champions is Swiss-based ECO PHYSICS. The ...


    By ECO PHYSICS INC.

  • Controlling the addition of Chlorine into a Process

    There are several methods for controlling the addition of chlorine into a process. These methods include flow proportional injection, ORP (oxidation reduction potential) or a residual chlorine analyzer. Each method measures a different process characteristic. Depending on the specific type of process being controlled, there generally is a best choice for controlling the injection of either ...


    By Walchem, Iwaki America Inc.

  • Hydrogen Chloride Analyzer (HCl, H2O)

    LGR's Hydrogen Chloride Analyzer (HCl, H2O) provides sensitive measurements of HCl in ambient air or in industrial process flows (e.g., coal and cement exhaust streams) with extremely high precision and sensitivity. No longer do you have to spend a lot of money or wait a long time to measure HCl with extremely high sensitivity – LGR's HCl Analyzer provides measurements every second with ...

  • Sulfur Compounds Analyzer MEXA-1170SX

    The MEXA-1170SX is a continuous gas analyzer for sulfur compounds existing in engine emissions. It can measure SO2 concentration and the amount of total reduced sulfur compounds (TRS), such as H2S, separately. It can also measure the total sulfur compounds (TS) that contains both gaseous compounds and liquid compounds in PM, such as SO3. By utilizing ultra-violet fluorescence (UVF) method and ...


    By HORIBA Europe GmbH

  • AMETEK PI wins stack gas/emissions analyzer category bronze medal award in control magazine reader choice awards

    Every single interaction between customer and supplier is an oppor-tunity for providing good solutions. After awhile, these positive mo-ments really begin to add up. Despite the huge effort and extreme consistency required, the best vendors almost re¬ exively deliver useful products and services, and con-tinually develop and release new improvements and innovations. Con-sequently, over ...

  • LAN Connectivity for Modern Process Instruments

    Process instruments such as gas analyzers are data sources, which feed a multitude of users. In general,the instruments provide these data analog or digitized through an RS232 interface. However, the datatransfer by this interface has to be located close to the controlling PC, because RS232 is designed forshort distances only. Beyond, the PC has to be dedicated and opts as master. With a ...


    By ECO PHYSICS INC.

  • Nuclear reactor coolant removal monitored by hydrogen measurements provided by Systech`s 542 programmable gas analyzers

    NNC Limited is using Systech's 542 programmable gas analyzers to monitor hydrogen off-gas in test rig for Dounreay Fast Breeder Reactor decommissioning. Decommissioning nuclear reactors is not only a matter of dealing safely with the radioactivity issues, non-nuclear contamination can be equally difficult to remove safely and economically. NNC Limited is currently developing a system to remove ...


    By Systech Instruments Ltd

  • The use of headspace gas analyzers in the modified atmosphere packaging of dried fruit and fruit snacks - Case Study

    Systech Illinois’ oxygen headspace gas analyzer helps Whitworths maintain the quality of a million packs of dried fruit every week.  In the UK, Whitworths produces around a million packs of dried fruit and fruit snacks each week using modified atmosphere packaging (MAP) to ensure long product shelf life. Sample packs are tested every hour using a Systech headspace gas analyzer ...


    By Systech Instruments Ltd

  • Air Dispersion Models - Models can be used to aid in demonstrating environmental compliance, analyzing process changes and evaluating the impacts of accidental releases

    Air dispersion models are used to estimate the downwind concentration of pollutants emitted by various pollution sources such as industrial facilities and regional public traffic. Dispersion models play an important role in the industrial and regulatory communities. They are typically used to demonstrate compliance with National Ambient Air Quality Standards as part of new source review, ...


    By Trinity Consultants

  • Application of combustion analyzers in safety instrumented systems

    The combustion process has always been considered having the potential for a hazardous event which could lead to personnel injury or loss of production. To mitigate this risk, the process industry is now implementing Safety Instrumented Systems which can identify hazardous operating conditions and correctly respond in such a way to bring the combustion process back to a safe operating condition ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you