process monitor Articles

  • Operating Principle of an Oxygen Monitor

    The oxygen concentration in the flue gas of a combustion process such as that of a power plant or a waste incinerator gives a good indication of the efficiency of the combustion process. The parameter is therefore of great interest to optimize fuel economy, but also to control and reduce emissions of air pollutants. An ideal combustion process only results in CO2 and water, but ...


    By Opsis AB

  • Carbon dioxide monitoring for food processing

    Application Carbon dioxide monitoring for food processing Equipment G100 CO2 analyser Location Okehampton, UK Customer Kerry Foods Requirement The customer was looking for a CO2 monitor to detect small changes in CO2 levels in the headspace above food products ...


    By Geotech

  • Gaussian process regression for monitoring and fault detection of wastewater treatment processes

    Monitoring and fault detection methods are increasingly important to achieve a robust and resource efficient operation of wastewater treatment plants (WWTPs). The purpose of this paper was to evaluate a promising machine learning method, Gaussian process regression (GPR), for WWTP monitoring applications. We evaluated GPR at two WWTP monitoring problems: estimate missing data in a flow rate ...


    By IWA Publishing

  • Real-time process dynamics monitoring in Anammox reactors

    Process dynamics in Anammox systems were evaluated through continuous monitoring of pH, oxidation reduction potential (ORP) and conductivity in two separate newly started-up sequencing batch reactors, one seeded with an enriched Anammox sludge and the other seeded with mixed activated sludge. The pH and ORP profiles exhibited characteristic patterns depending on the process dynamics during early ...


    By IWA Publishing

  • Monitoring the performance of moisture purifiers for process gases

    Problem Statement Moisture purifiers are a big aid in keeping moisture levels under control inside a process chamber. They are provided by manufacturers with certain life expectancies, which vary depending on the moisture content of the gas being purified. As a result, it is difficult to determine which gases have a high moisture content and which moisture purifier is becoming ...


    By CIC Photonics, Inc.

  • Continuous monitoring of moisture present inside a process chamber

    Problem Statement Moisture inside a process chamber is a big silent killer during wafer production. When production yield goes down, it is hard to pinpoint the source of the problem. Most of the time wafers need to be sent to labs for analysis, while production is stopped. If the problem is related to a high level of moisture inside the reactor, there are several factors that can cause ...


    By CIC Photonics, Inc.

  • Assessing Upstream Process Changes with ATP Monitoring

    While the Biomass Stress Index (BSI) parameter is most often used to reveal when a biological population has been subjected to toxicity, it can also indicate when an upstream change has relieved a stressful condition. In this month’s featured case study, a pulp & paper wastewater treatment plant made a change to its papermaking process that changed the properties of the wastewater ...


    By LuminUltra Technologies Ltd.

  • Solution for the processing of TV and PC monitors - Case Study

    Bundles of power The disposal specialist L + N Recycling in Bubesheim had been trying to resolve a longstanding conflicting challenge: TV and PC monitor plastics should be compacted as tightly as possible for transportation, however, at the same time should remain in pieces that were large enough to be sorted later. The Bubesheim company found the solution in the HSM baling press. ...


    By HSM GmbH + Co. KG

  • Online Process Analyzer Installed at F.J. Horgan WTP to Monitor Chloramination

    Construction was completed on the City of Toronto's F.J. Hor-gan Water Treatment Plant in 1979, more than 60 years after chloramine had first been used to disinfect drinking water in an Ottawa plant. By then there was little debate about the benefits of chloramination and it was incorporated into the new plant's design as part of the disinfection process. Chloramine is more stable than free ...


    By ASA Analytics

  • Area monitoring of specific ppb-level constituents utilizing process gas chromatography

    ABSTRACT In most of the industrialized countries worldwide, increasingly stringent environmental regulations require the continuous reduction of a wide range of emission sources and components. Despite local variations concerning concentrations, absolute emission quantity, target priorities and timetables, regulations typically require active compliance and proof thereof. The impact of ...

  • Integrate noise measurements into your existing Process Monitoring and Control Systems.

    The ZE:908 is a small and lightweight power supply and acoustic conditioning unit for the Cirrus MV:200 microphone preamplifiers and MK:170 Outdoor microphone units. Many industrial plants have a variety of process sensors strategically placed around their site so that safety, environmental impact and efficiency can be monitored and managed, in real time, from one or more control rooms. The ...


    By Cirrus Environmental

  • Monitoring the fate of fluorescing substances recycled in ultrafiltration process backwash water

    The fate of fluorescing substances during the recycling of membrane backwash water (MBWW) ahead of coagulation, flocculation and sedimentation (CFS) with ultrafiltration (UF) membranes has been investigated. Bench-scale UF membranes were used to generate MBWW from a CFS-treated surface water containing 21 mg/L dissolved organic carbon (DOC) registering a 0.95 cm–1 UV254 absorbance that ...


    By IWA Publishing

  • Monitoring Databases

    EHS Data have been providing software and services to our clients to help them manage and report on their Environmental, Health and Safety Data for more than 14 years. This paper deals with the global evolution in environmental concerns and how this changes the data management obligations and requirements of companies. ...


    By EHS Data Limited

  • Collini metal processing plant

    Introduction The submerged membrane bioreactor plant at Collini galvanic industries in the West of Austria is a fine example of process optimization in a complex industrial environment. The plant is owned and operated by Collini and is now in its 3rd year treating wastewater from a metal processing facility. It is sited in an industrial estate and discharges into a small waterway in an ...


    By Kubota Membrane Europe Ltd.

  • Dust monitoring

    Generally, two different approaches are used to measure the amount of dust deposited on a surface; Determination of the soiling of a surface, by a change in its properties; Determination of the quantity of dust deposited, by weight. WHAT IS DUST? Dust is a generic term used to describe fine particles that are suspended in the atmosphere. Dust comes from a wide variety of sources, including soil, ...


    By Queensland Laboratory

  • Typical process weighing applications

    Process weighing relates to the weighing of a powder material as part of a production process. The technology includes continually monitoring a material in a silo, discharging material by weight or rate, or even weighing products on the move. This article gives an overview of most of the typical process weighing applications that are used in all sorts of industries: level or inventory measuring ...


    By Hardy Process Solutions

  • Processing technology for radioactive wastes

    For 20 years now, AVA has been delivering innovative mixers, dryers, and systems for environmental and processing technologies. The treatment of highly contaminated materials has always been one of our core competencies. For more than 10 years, AVA Technology has been applied for the processing of radioactive wastes. The application of AVA mixers and reactors may be divided into two main ...


    By AVA GmbH u. Co. KG

  • Controlling the addition of Chlorine into a Process

    There are several methods for controlling the addition of chlorine into a process. These methods include flow proportional injection, ORP (oxidation reduction potential) or a residual chlorine analyzer. Each method measures a different process characteristic. Depending on the specific type of process being controlled, there generally is a best choice for controlling the injection of either ...


    By Walchem, Iwaki America Inc.

  • Co-Metabolic Processes

    Introduction: Co-metabolism is one form of secondary substrate transformation in which enzymes produced for primary substrate oxidation are capable of degrading the secondary substrate fortuitously, even though the secondary substrates do not afford sufficient energy to sustain the microbial population. An emerging application involves the injection of water containing dissolved primary ...

  • Market Expansion: Process Innovation

    Introduction The Beacon Press is an environmental leader in the printing industry. They have embarked upon a substantial environmental program of direct action which includes three main categories: The introduction of a comprehensive program of on-site working practices which actively discriminate in favor of the environment. A program of environmental education ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you