process monitoring equipment Articles

  • What you need to know about mercury emissions monitoring

    Gasmet Technologies (Finland) has published a new White Paper on the monitoring of mercury emissions to air from industrial processes. The Paper provides an overview of current initiatives to reduce mercury emissions and explains how continuous mercury emissions monitoring can help inform process control and the efficient operation of pollution abatement equipment, whilst also demonstrating ...


    By Gasmet Technologies Oy

  • Taking advantage of production waste - Case Study

    Recycling areas: Various scrap Company name: KME (Serravalle Copper Tubes) Located: Serravalle Scrivia (Alessandria), Italy Founded: 1886 Employees: 5700 KME is a leading global fabricator of copper and copper alloy semi-finished products. Each year 405.000 tons of copper and copper alloy semi-finished products (excluding copper wire) are produced. ...


    By Eldan Recycling A/S

  • Carbon dioxide monitoring for food processing

    Application Carbon dioxide monitoring for food processing Equipment G100 CO2 analyser Location Okehampton, UK Customer Kerry Foods Requirement The customer was looking for a CO2 monitor to detect small changes in CO2 levels in the headspace above food products ...


    By Geotech

  • Continuous Emissions Monitoring Equipment – Guidance & Selection

    There has never been such a wide range of analysers and systems available for continuous emissions monitoring as there is today. In the UK there are over 12 manufacturers and distributors offering CEMS (continuous emissions monitoring systems) using a variety of technologies including UV and IR absorption, FTIR, DOAS, chemiluminescence and photoacoustic spectroscopy (PAS). The majority of CEMS ...

  • Automatic Sludge Blanket Level Detector: Monitor & control for effective, efficient processing

    Reducing energy consumption at municipal and industrial plants is, increasingly, a priority. Markland Specialty Engineering Ltd., designing and manufacturing process control instrumentation since 1967, helps achieve this important goal with its Automatic Sludge Blanket Level Detector. By helping facilities reduce waste - reducing unnecessary water, chemical or energy use, and unnecessary ...

  • Heavy equipment manufacturer

    Overview: Multi-plant implementation, 20 plus sites, of EPOCH Chemical Management, Source Monitoring and Hazardous Waste Management modules, with interfaces to inventory / purchasing system to automate data entry for chemical movement and usage. Regulatory reporting, Tier II and 313 Form R, is generated as a by-product of processing the inventory transactions received electronically and having ...


    By Logical Data Solutions, Inc.

  • Fuel alternatives for heavy equipment

    High fuel prices are leading composters and wood grinders to reevaluate diesel-guzzling heavy equipment, looking to alternatives that are both more cost-efficient and environmentally friendly. This could be as “simple” as filling up existing machines with biodiesel blends, could involve swapping out a diesel model for an electric one, or even go as far as generating electricity on site to power ...


    By BioCycle Magazine

  • Garden Street Iron & Metal Processes 8,000 Tons of Scrap Each Month Using Variety of Eriez Recycling Equipment

    Problem: Garden Street Iron & Metal recycling complex, located just west of downtown Cincinnati, OH, has been owned and operated by the Weber family for more than five decades. The complex, set on 22 acres with three nearby rail spurs in Spring Grove, is a beehive of activity as both consumers and businesses truck in ferrous and nonferrous metal for re-processing. To remain on the ...


    By Eriez Magnetics Europe Ltd

  • Neosens has been rewarded with the first prize during the CFIA 2010 Innovation Award ceremony in the 'Equipment & Process' category

    The last-born of Neosens, the FS-1000 probe, was conceived for the local, continuous and in-situ fouling monitoring in pipes, heat exchangers and reactors. Based on a patented micro-thermal principle and using the Microsystems technology, the FS-1000 probe is directly implanted inside the industrial equipment to follow-up in real-time the cleaning-in-place (CIP) procedures, ...


  • Typical process weighing applications

    Process weighing relates to the weighing of a powder material as part of a production process. The technology includes continually monitoring a material in a silo, discharging material by weight or rate, or even weighing products on the move. This article gives an overview of most of the typical process weighing applications that are used in all sorts of industries: level or inventory measuring ...


    By Hardy Process Solutions

  • Co-Metabolic Processes

    Introduction: Co-metabolism is one form of secondary substrate transformation in which enzymes produced for primary substrate oxidation are capable of degrading the secondary substrate fortuitously, even though the secondary substrates do not afford sufficient energy to sustain the microbial population. An emerging application involves the injection of water containing dissolved primary ...

  • Warehouse Optimization: Balancing Equipment Performance and Worker Safety Through Emissions Measurements and Air Quality Monitoring

    Successful warehouse functionality is dependent on both maximizing equipment performance and providing a safe and healthy environment for workers that encourages productivity. However, these two factors are often at odds with each other as warehouse equipment such as forklifts, burnishers and delivery trucks emit toxic gases that can have the potential to create poor indoor air quality which ...

  • Application Report - Process Measurement Technology

    Untitled Document ...


  • The In Situ Bioremediation/Groundwater Remediation Process

    In-situ groundwater bioremediation is a technology that encourages growth and reproduction of indigenous microorganisms to enhance biodegradation of organic constituents in the saturated zone. In-situ groundwater bioremediation can effectively degrade organic constituents which are dissolved in groundwater and adsorbed onto the aquifer matrix. The Adventus In Situ Bioremediation/Groundwater ...


  • Plant area monitoring at Krško

    Post-Fukushima upgrades at Krško in Slovenia (www.nek.si) are being implemented in accordance with the requirements of the national regulator and the plant owners. The first phase, including a passive containment vent filtering system and hydrogen recombiners, a new emergency diesel generator, and a protected store of mobile emergency equipment, is already completed. The next phase in ...


    By Bertin Technologies

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Monitoring Phenol in Water

    The Situation A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek. A leak in the reactor and associated cooling equipment would cause phenol and phenolic compounds to contaminate the cooling water. Such a leak could ...

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you