process oxygen analyzer Articles

  • PureAire Oxygen Analyzers & Oxygen Monitors for Nitrogen Generators

    Nitrogen has many uses in industrial applications where oxidation would be undesirable. From carbonizing beer to preserving food, reducing fire danger, and cleaning equipment, nitrogen is a safe, inexpensive gas. For companies that need a steady supply of nitrogen gas, nitrogen generators work well. Learn about the uses of nitrogen generators and why you should use oxygen monitors in ...

  • Titanium Demand on Rise for Additive Manufacturing Printing: How it’s Made? Titanium Plasma Atomization.

    Plasma atomization is used in many applications, including 3D printing. First developed in 1998, this technique has risen to become the industry standard process for creating reactive metal powders suitable for 3D printing. Learn how plasma atomization works and why you need an oxygen monitor to stay safe with plasma atomization.  How Plasma Atomization Works ...

  • Using FTIR spectroscopy to measure hydrocarbon pollution in water

    According to the World Health Organization (WHO) and UNICEF’s 2015 Progress on Sanitation and Drinking Water report almost 700 million people around the world don’t have access to clean drinking water [1]. Poor water quality is beginning to return to the developed world too. The strain of population growth, intensified agricultural practices and continued industrial expansion have are ...


    By Specac Limited

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • PureAire Oxygen Analyzer for 3D Printers: How Argon is used and Why O2 Detection is Required

    Thanks to new technologies, the 3D printers that have been used to create plastic three-dimensional objects can now print metal. Titanium 3D printing is possible thanks to a technique called DMLS, or Direct Metal Laser Sintering. While the potential to use titanium 3D printing is groundbreaking for many industries, the new advances could pose a health hazard if volatile gases used in the printing ...

  • Online Process Analyzer Installed at F.J. Horgan WTP to Monitor Chloramination

    Construction was completed on the City of Toronto's F.J. Hor-gan Water Treatment Plant in 1979, more than 60 years after chloramine had first been used to disinfect drinking water in an Ottawa plant. By then there was little debate about the benefits of chloramination and it was incorporated into the new plant's design as part of the disinfection process. Chloramine is more stable than free ...

  • Continuous measurement of Process oxygen for Claus sulfur recovery unit (sru) start-ups and shut-downs case study

    During start-up and shut-down, any time a sulfur recovery unit (SRU) transitions from ambient temperature through fuel gas warm up to the introduction of acid gas, measurement of 02 stoichiometry is critical. Historically, operators have manually taken samples using a portable electrochemical type Os analyzer. While giving more or less satisfactory results, the requirement for more stringent ...

  • Application of chemical oxygen demand to drinking water

    “This study investigated the use of a photoelectrochemical chemical oxygen demand (peCOD) analyzer for the detection of model organic compounds and natural organic matter (NOM) from four drinking water treatment plants in Nova Scotia, Canada. Most model organic compounds showed ...


    By Camlab Limited

  • TOC analyzer for airports

    During winter, de-icing processes at airports necessitate storm water and de-icing water management. Especially due to adhesive (sticky) substances, strongly fluctuating concentrations and a lot of chemicals, the monitoring systems itself must be tailor-made to fight this water analysis challenge. LAR 's ...


    By LAR Process Analysers AG

  • Headspace gas and oxygen permeation analysis of food packaging designs - Case Study

    Food packaging designs tested using Systech Illinois gas analysis equipment At the Loughry Campus, Systech Illinois' headspace gas analyzer and oxygen permeation analyzer are used in the testing of food packaging. Located in Cookstown, County Tyrone, Northern Ireland, Loughry Campus offers educational and training programmes in all elements of Food Management. Students have ...


    By Systech Instruments Ltd

  • Oxygen detection in manufacturing of precious and non-precious metal coins - Case Study

    Oxygen detection in heat treating/annealing furnace atmosphere in manufacturing of precious and non-precious metal coins Sunshine Minting use the Systech Illinois EC913 process oxygen analyzer to monitor the oxygen in their heat treating/annealing furnace attmosphere. Based in Idaho, U.S.A., Sunshine Minting Inc. (SMI) is a leading supplier of precious metal and base metal mint products. ...


    By Systech Instruments Ltd

  • Characteristics and indications of hydrogen and oxygen isotopes distribution in lake ice body

    Stable isotopes have been used to identify the characteristics of precipitation, evaporation, basin hydrology, and residence times. However, lakes in the cold regions are usually covered by ice for 5–6 months. To get a better understanding of stable isotopes characteristics and indications in lake ice bodies, ice and water were sampled during the icebound season in both the ice and water ...


    By IWA Publishing

  • Pure Oxygen Plus Nitrification? Biowin Modeling Plus Full-Scale Experience

    ABSTRACT High Purity Oxygen (HPO) activated sludge treatment and nitrogen removal do not have to be mutually exclusive. Some HPO activated sludge treatment facilities in relatively warm climates must address recently implemented or upcoming regulatory changes that require reduction of effluent nitrogen discharge levels. The 48.75 mgd capacity (annual average) Hollywood Southern Regional ...

  • Online Chemical Oxygen Demand for Treatment Optimization - Case Study

    A wide variety of products are made in the chemical and pharmaceutical manufacturing industries, that require large volumes of chemicals, materials, and substances that are used throughout process operations. Waste water from these facilities typically include contaminants, toxins, nutrients, and organic content that presents challenges with regards to treatment. A major UK based chemical ...


    By MANTECH

  • Assessing performance of on-line nitrate analyzers

    Traditionally, activated sludge processes were designed to remove organics and suspended solids from wastewater. The justification for including nitrogen control in wastewater treatment facilities began with the need to protect receiving waters from the increasing problem of eutrophication and hypoxia (low levels of dissolved oxygen in bottom waters, generally less than 2 mg/l). One of the ...

  • Hydrogen Chloride Analyzer (HCl, H2O)

    LGR's Hydrogen Chloride Analyzer (HCl, H2O) provides sensitive measurements of HCl in ambient air or in industrial process flows (e.g., coal and cement exhaust streams) with extremely high precision and sensitivity. No longer do you have to spend a lot of money or wait a long time to measure HCl with extremely high sensitivity – LGR's HCl Analyzer provides measurements every second with ...

  • Application of combustion analyzers in safety instrumented systems

    The combustion process has always been considered having the potential for a hazardous event which could lead to personnel injury or loss of production. To mitigate this risk, the process industry is now implementing Safety Instrumented Systems which can identify hazardous operating conditions and correctly respond in such a way to bring the combustion process back to a safe operating condition ...

  • AMETEK THERMOX Introduces the WDG-V Combustion Analyzer

    Abstract AMETEK THERMOX Introduces the 5th Generation THERMOX Combustion Gas Analyzer in a CONTROL Magazine Exclusive. WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as well as CO and methane levels.  Information from the Gas Analyzer allows operators to obtain the highest ...

  • Real-Time Control Optimizes Extended Aeration Processes

    The population of Hillsborough County, Florida has doubled since the Valrico advanced wastewater treatment plant (AWTP) was built in 1990 to treat the sewage of several small communities west of the City of Tampa. When it began operation, the Valrico AWTP capacity was only 4 MGD; small when compared to Tampa's 96 MGD Howard F. Curren AWTP located not far to the east. But Valrico serves as a very ...

  • Analyzing sulfur in soil and sediment with handheld XRF

    Background Sulfur creates more than nasty odors. Exposure to low levels (0-10ppm) of hydrogen sulfide (H2S) causes irritation of eyes, nose, and throat; higher levels can cause headaches, dizziness, nausea and vomiting, coughing, and breathing difficulty. H2S and numerous other odor-causing compounds are generated as a result of organic material decomposition. In the case of the Muddy River in ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you