process water industry Articles

  • Sludge Blanket Level Detection – making new process opportunities possible

    Much Pulsar's Self-Cleaning Viper Sludge Sensor of the demonstrating the effective maintenance-free solution. discussion around the way we deal with sewage sludge – the way it is moved around the process, the bellmouth valves and decant processes, the downstream treatment of the liquors, important issues around TOTEX and discharge Compliance, plus more recently the ...

  • Strategic management of water resources important to Ontario craft breweries

    The vast majority of craft breweries in Ontario understand the need to improve their water and resource management performance to save money, protect the environment and enhance community relations. This was a major finding of a survey of Ontario craft breweries conducted in the fall of 2016 that found 97 per cent of respondents agree that better water management is important or very important to ...


    By BLOOM

  • How to make top-down and bottom-up sustainability converge

    Fits and starts are all too common in the sustainability world. One year you have budget for initiatives; the next you don’t. Management hails cost savings on individual projects, but they miss the big picture and fail to link progress across departmental boundaries. Bottom-up progress and top-down directives pass each other like proverbial ships in the night. But it doesn’t have to ...


    By CH2M Hill Companies, Ltd.

  • Oil Sampling Best Practices (Part 2)

    Understanding Dynamic Particle Equilibrium in Closed Loop Systems Dynamic Equilibrium Condition (DEC) is defined as a steady state condition where the normal wear rate in a machine results in no net gain or loss of particles. ...


    By Spectro Scientific

  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Case study - Tin plating wastewater treatment

    The Client The Client is a steel industry based in the Middle East producing tinplates for food cans. Tinplates provide excellent corrosion resistance and are produced starting from cast iron by several steps. Cast iron is first rolled to get thickness in the range of 0.2 – 0.3 mm than it is electroplated from aqueous acid solutions at a temperature around 60°C. The plating bath ...

  • Offshore wind costs and development risk

    How procurement strategies, manufacturing costs and new technology stack up against development risk in Offshore Wind Projects. Offshore wind is changing, and it is changing for the better. In 2006, offshore wind deployment costs started rising significantly, from £1.5m/ MW, in 2016 prices, to over £4m/MW in 2012, without a clear indication as to what the price ceiling would ...


    By SgurrEnergy Ltd.

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Using Electromagnetic induction to characterize soils - Case Study

    Electrical conductivity measurements have been used for years to determine salinity and moisture in soils. Probes were inserted directly into the soil to determine how well the soil conducted an applied current. This process was slow and labor-intensive and was usually reserved for scientific studies. A more recent technique for measuring conductivity is electromagnetic induction (EM), a ...


    By Geonics Limited

  • Low energy mixing to optimize anaerobic digestion at the Kitchener WWTP

    The existing Kitchener Wastewater Treatment Plant (WWTP) is a conventional secondary treatment facility, with a rated capacity of 122,745 mVd. The plant is comprised of two separate secondary treatment plants (Plant 1 and Plant 2) served by a common headworks facilities and primary clarifier facilities. Plant 1 was constructed in the early 1960s and Plant 2 was constructed in the mid-1970s. Both ...

  • Does your facility need Zero Liquid Discharge Technology?

    If your industrial facility discharges its waste into deep wells, streams, sewers to publicly owned treatment works (POTWs), and/or other waterways, it is likely there are some types of regulations on discharging the waste. With an increasing push toward environmental protection, many industrial facilities and effluent regulators are strengthening strategies to reduce industrial process waste. ...


    By SAMCO Technologies, Inc.

  • Stop It Pipe Repair System assists in decommissioning project - Case Study

    Since 1986, InduMar Products Inc. has provided a unique solution with its STOP IT Pipe Repair System. In refineries and chemical plants, where many miles of piping carry products that are often highly flammable, toxic or corrosive, the STOP IT provides a method to restore product and profit flow in minutes instead of the many hours required to cut out a pipe section, fabricate and install a new ...


    By InduMar Products, Inc.

  • Industrial membrane processes in the treatment of process waters and liquors

    A review on pulp and paper industrial membrane processes using a variety of modules and processes is presented. Membranes are mostly used today to purify process waters and to recover coating colours. Ultrafiltration using tubular membrane modules or cross-rotational (CR) filtration has been widely applied for the purification of process waters. The reuse of UF membrane permeate has decreased the ...


    By IWA Publishing

  • Biofilm control strategies in industrial processing waters

    Bacterial biofilms cause a number of serious problems for industrial fluid processing operations. Mechanical blockages, impedance of heat transfer processes and microbially induced corrosion result in billions of dollars of losses each year. In engineered systems, such as cooling water systems, food processing, and other industrial applications possible risk to public health and product spoilage ...

  • Reusing water for industrial processes and irrigation in Saudi Arabia

    Water is a scarce resource in Saudi Arabia and the public administration and private companies implement water reuse whenever possible. A reverse osmosis plant installed in the Eastern Province of Saudi Arabia helps to treat industrial waste water streams to quality levels that permit water reuse for industrial applications and irrigation. Kemira KemGuard antiscalant is used to prevent deposit ...

  • Membrane processing for water treatment in the semiconductor industry

    It is the aim of high-purity water production to either fully eliminate organic and ¡florganic compounds, particles, and microorganisms from the water or to reduce their concentrations to values below the detection limits of the most advanced analysis methods. Currently, this problem is solved by means of a multi-stage process chain, in which membrane technology ...

  • Innovative Water Solutions for the Food/Beverage Processing Industry

    With the growing international and local pressure, the Food and Beverage industry has to find new ways in its product development as well as minimizing costs and health risks. Sustainability has become an important issue in the evolving Food and Beverage industry. Companies are being required by industries and government agencies to better utilize their water consumption to minimize their ...

  • Formaldehyde: 15 Products, Processes and Industries

    Formaldehyde is a colourless gas with a characteristic pungent odour. It's widely used in many industries and causes severe health issues if used inappropriately. Formaldehyde is highly toxic to humans, regardless of method of intake. Even very short-term exposure to formaldehyde irritates the eyes causing pain, redness, blurred vision and severe eye watering. It can irritate the nose and throat ...


    By PPM Technology

  • Ozone Based AOP process for refractory COD reduction in industrial waster water

    Introduction In recent years improvements  in ozone based advanced oxidation technology efficiencies have lowered capital and operating expenses, improving the viability of the use of ozone as the main oxidant. An investigation into alternatives for refractory COD removal which is economically attractive and do not produce sludge lead to an evaluation of ...


    By ESCO International

  • Integrated process control for recirculating cooling water treatment in the coal chemical industry

    This work focused on the integrated process of the recirculating cooling water (RCW) treatment to achieve approximate zero emission in the coal chemical industry. The benefits of fractional and comprehensive RCW treatment were quantified and qualified by using a water and mass balance approach. Limits of cycle of concentrations and some encountered bottlenecks were used to ascertain set target ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you