process water treatment Articles

  • Pulp & Paper Water Treatment - A look at optimizing water resource management

    Application Case Study (Pulp/Paper Operations) The pulp and paper industry has traditionally been a consumer of large amounts of fresh water and power. Recently, increased focus has been given to the optimized efficiency of paper mills and to the environmental sustainability footprint of the industry. Therefore, water resource management has become a more critical factor ...

  • European water policies and human health — Combining reported environmental information

    Society depends on the satisfactory and sustainable management of water. Historically, the primary purpose of water treatment was to protect human health, through reducing disease being transmitted through water. Subsequent measures to address environmental concerns have broadened our expectations of what water and waste water treatment should deliver. This report considers three pieces of EU ...

  • Industrial membrane processes in the treatment of process waters and liquors

    A review on pulp and paper industrial membrane processes using a variety of modules and processes is presented. Membranes are mostly used today to purify process waters and to recover coating colours. Ultrafiltration using tubular membrane modules or cross-rotational (CR) filtration has been widely applied for the purification of process waters. The reuse of UF membrane permeate has decreased the ...


    By IWA Publishing

  • Beef Processing Waste Water Treatment

    Industrial Beef Processor Wastewater Treatment Success Story Beef Processing Wastewater Treatment - $80k Saved a Month! First Beef Processing Facility This facility ...


    By Integrated Engineers Inc.

  • Process Water Treatment – Challenges and Solutions

    Untitled Document Clean water is needed by chemical-process plants for a wide range of process-related and auxiliary uses. Likewise wide is the range of options available to the ...


  • Waste Water Treatment Processes Explained

    SUNCOAST WASTE WATER MANAGEMENT  presents  AEROBIC -verses- ANAEROBIC THE AEROBIC PROCESS There are two basic types of sewerage treatment processes, which are the Aerobic process and the Anaerobic process. Aerobic means with air or oxygen and Anaerobic (septic) means without air or oxygen. Aerobic bacteria are a higher life form and when digesting waste are utilising dissolved oxygen or air in ...

  • Waste water treatment, intensification of process

    Among the various methods such as homogenizing, mixing, neutralization, sedimentation, filtering, ion exchange etc. ABC-100 PC GlobeCore production is machines with vortex layer and it is widely used for: ·               wastewater treatment from hexavalent chromium and other heavy ...


    By PC GlobeCore

  • MIEX Resin Water Treatment Process

    The MIEX®1 Resin process was developed in Australia for the removal of natural organic material in water treatment. This novel, truly continuous ion exchange process, is based on the MIEX® resin – a micro size, macroporous, strong base, magnetic ion exchange resin. The resin was specially developed for this application and optimised for reversible removal of negatively charged organic ions. The ...


    By IXOM Watercare

  • Case study - Veolia MPPE Technology - TOTAL F 15A Offshore - NL

    Offshore Gas Produced Water treatment-Unmanned Operation Operational since 2002 Robust against salt, surfactants, Corrosion inhibitors Fulfilling TOTAL’s environmental goal beyond present legal requirements Challenge Unmanned operation Remote control Practically no space on existing ...

  • White Paper: Cyclical Aeration Control- Combining Aerobic & Anoxic Conditions in One Basin

    Increase Water Quality with Cyclical Aeration With increased effluent pollution restrictions on municipal wastewater treatment plants, cities are pressed to find ways to economically increase their effluent quality with little to no funding. Many new NPDES permits ...

  • Determining Proper Cooling Tower Size

    To maximize water-based cooling tower benefits, the appropriate tower size must be selected, requiring the identification of several critical factors. Cooling towers are a relatively inexpensive and reliable way of expelling heat from a number of industrial processes, including nuclear & thermal power plants, petroleum refineries, petrochemical plants, food processing plants, as well as HVAC ...


    By Delta Cooling Towers, Inc

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Peach Processing Wastewater Treatment

    A major fresh pack operation of peaches and nectarines needed a screening system to remove the labels and peach fuzz from their wash water before it was pumped from the pond for irrigation use. Flow to the pond is a steady flow of 50 gpm, rising to 600 gpm during periodic draining of the peach coolers and washing systems. The water is a combination of wash water, labels and fuzz from the fruit, ...


    By Integrated Engineers Inc.

  • Shrimp Processing Wastewater Treatment

    These jars show the treatibility with Floccin J and wastewater from cooked shrimp. The initial untreated water had a TSS of 1,230 ppm and a BOD of 3,000 ppm. The addition of 0.10 grams of Floccin J in 100ml (8.34 lbs/1,000 gallons) created a tight flock and a very clean effluent water quality. The treated TSS was less than 10 ppm and the BOD was 200 ppm. There was a significant amount of oil ...


    By Integrated Engineers Inc.

  • Milk Processing Wastewater Treatment

    A milk processing facility was using a 800 hp evaporator to dispose of their 0.75% solids concentrated milk waste stream. The staff was interested in evaluating the effect of using the Floccin products to capture the majority of the BOD and send this higher % solids/BOD sludge to the evaporator. The idea was to reduce the electric hp by reducing the volume of water going to the evaporator. Their ...


    By Integrated Engineers Inc.

  • Simulation for Operation and Control of Reject Water Treatment Processes

    The recycled nutrient load of the reject water streams from solids handling is considerable, and can amount to 15-25% of the influent nitrogen load. A number of sidestream biological processes have been developed for treating the ammonia component of the reject water before returning it to the liquid train. This paper describes a plant-wide model that includes the reactions important in ...

  • Membrane processing for water treatment in the semiconductor industry

    It is the aim of high-purity water production to either fully eliminate organic and ¡florganic compounds, particles, and microorganisms from the water or to reduce their concentrations to values below the detection limits of the most advanced analysis methods. Currently, this problem is solved by means of a multi-stage process chain, in which membrane technology ...

  • Drinking water treatment - understanding the processes and meeting the challenges

    On and follow Natural organic matter (NOM) derived from soil and vegetation in water catchments is the key factor influencing most, if not all water treatment processes. The structure of the NOM and its involvement in water treatment processes requires better understanding. It seems likely that a better understanding of NOM reactions could lead to far better predictive capacity for water ...


    By IWA Publishing

  • Control-design methodology for drinking-water treatment processes

    The performance of a drinking-water treatment plant is determined by the control of the plant. To design the appropriate control system, a control-design methodology of five design steps is proposed, which takes the treatment process characteristics into account. For each design step, the necessary actions are defined. Using the methodology for the pellet-softening treatment step, a new control ...


    By IWA Publishing

  • MIEX® DOC Process for Removal of Humics in Water Treatment

    INTRODUCTION Humic substances present a significant problem in water treatment by causing colour in water, increasing required coagulant doses, providing precursors for disinfection by-products and causing re-growth in the distribution network. Humic compounds comprise more than 60% of natural organic matter in source waters. Dissolved organic carbon (DOC) is a “bulk” measure of the organic ...


    By IXOM Watercare

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you