process water treatment chemicals Articles

  • Drinking Water Treatment Process

    Most drinking water comes from a surface water source, such as a lake or river, or a groundwater source, such as a well or spring. This water requires treatment before it can be safely consumed; the level to which the water is treated depends on the source of the water and also on federal regulations. In the United States, for example, the Safe Drinking Water Act was created by the Environmental ...


    By Brentwood Industries, Inc.

  • Manufacturer of Water Treatment Chemicals and Water Additives

    Water treatment is a process for treating sewage or modern wastewater and converting it into more acceptable form for a specific end-use. The end utilization of this treated water might be drinking, mechanical water supply, water system, waterway stream support, water diversion or numerous different uses, including being securely returned to nature. Water treatment expels ...


    By Water Chemicals

  • Beef Processing Waste Water Treatment

    Industrial Beef Processor Wastewater Treatment Success Story Beef Processing Wastewater Treatment - $80k Saved a Month! First Beef Processing Facility This facility ...


    By Integrated Engineers Inc.

  • Chemical processing facility

    Client: Bell Helicopter Textron Inc. Project Summary  Burns & McDonnell provided design services for the construction of a new 40,000-square-foot facility with two automated chemical processing lines at Bell Helicopter Textron Inc.'s Plant 1 in Hurst, Texas. Spaces were provided for associated manufacturing processes, including non-destructive testing, abrasive blasting ...


    By Burns & McDonnell

  • Integrated process control for recirculating cooling water treatment in the coal chemical industry

    This work focused on the integrated process of the recirculating cooling water (RCW) treatment to achieve approximate zero emission in the coal chemical industry. The benefits of fractional and comprehensive RCW treatment were quantified and qualified by using a water and mass balance approach. Limits of cycle of concentrations and some encountered bottlenecks were used to ascertain set target ...


    By IWA Publishing

  • Wastewater Treatment Process

    The wastewater treatment process is complex and critical to civilization. In simplest terms, wastewater is water that has been mixed with waste matter. Wastewater can be classified as domestic, municipal, or industrial based upon the source of generation. For instance, domestic wastewater comes from everyday liquid waste, including water used to flush the toilet, to shower, or to wash dishes. ...


    By Brentwood Industries, Inc.

  • Perfluorinated chemicals (PFCs) in water purification plants (WPPs) with advanced treatment processes

    A series of perfluorinated chemicals (PFCs) surveys were conducted in two water purification plants (WPPs) having ozonation and granular activated carbon (GAC) filtration processes. In each plant, six different processes samples (source water, influent, coagulation-sedimentation effluent, ozonation effluent, GAC filtration effluent, and final tap water) were collected for two times and eight PFCs ...


    By IWA Publishing

  • Easy To Integrate: Dezentralised Treatment Of Process Water

    Technical processing systems are some of the most complex industrial plants in existence. In the petrochemical industry, lor example, a great number of chemical products can be manufactured from crude oil and natural gas as a result of chemical-physical processes using such systems. They are designed by special companies, such as the Engineering Division of Linde AG, which having installed over ...


    By EnviroChemie GmbH

  • Safe, sustainable and economical treatment of process water

    EnviroChemie is a specialist in providing solutions for all tasks relating to process water treatment. For 40 years, we have been providing consultancy, prefabricating plants at our own locations and installing them at client locations. Plants range from small compact plants to individual, customer specific system solutions with several hundred cubic metres capacity per hour. We ship our plants, ...


    By EnviroChemie GmbH

  • Modular treatment system neutralizes process water

    A self-contained pH control and monitoring sys- tem for ready mixed operations yields clean water for recycling or permitted discharge to the environment. Fortrans' Model 5000S uses car- bon dioxide gas to neutralize high-pH process water, offering precise alkalinity monitoring and control of water in pits, settling basins and other containment areas, as it lowers total suspended solids. Designed ...


    By Fortrans, Inc.

  • Whitepaper: Chemical-physical Water Treatment, Filtration and Flocculation

    Introduction In water treatment plants chemical-physical processes play an essential part in the process chain. They are successfully employed in the pre- and post-treatment of waters of different origins, as well as of other process liquids. In this regard the removal of particles by filtration is a central step. Classical filtration processes are used for particles ranging from ...


    By EnviroChemie GmbH

  • In Situ Physical/Chemical Treatment for Ground Water and Leachate

    The main advantage of in situ treatments is that they allow ground water to be treated without being brought to the surface, resulting in significant cost savings. In situ processes, however, generally require longer time periods, and there is less certainty about the uniformity of treatment because of the variability in aquifer characteristics and because the efficacy of the process is more ...

  • Looking Beyond Chemical Water Treatment Case Study

    When you think of an environmentally friendly company, a steel processing plant does not typically come to mind. However, Stripco Inc. of Mishawaka, IN, a manufacturer of production-ready, cold-rolled steel coils, is the exception. In August of 1995, Stripco made a wise decision that also proved to be cost-effective and environmentally- friendly when they installed a Superior Environmentalist ...

  • Control-design methodology for drinking-water treatment processes

    The performance of a drinking-water treatment plant is determined by the control of the plant. To design the appropriate control system, a control-design methodology of five design steps is proposed, which takes the treatment process characteristics into account. For each design step, the necessary actions are defined. Using the methodology for the pellet-softening treatment step, a new control ...


    By IWA Publishing

  • Improving Groundwater with Chemical Treatments

    Groundwater contributes to the health and well-being of a natural environment in the area and those systems connected to it. There are times that contaminants create an imbalance in groundwater, and a groundwater treatment system needs to be applied. Here are some chemical treatments that work to help ...


    By PotashCorp

  • Peach Processing Wastewater Treatment

    A major fresh pack operation of peaches and nectarines needed a screening system to remove the labels and peach fuzz from their wash water before it was pumped from the pond for irrigation use. Flow to the pond is a steady flow of 50 gpm, rising to 600 gpm during periodic draining of the peach coolers and washing systems. The water is a combination of wash water, labels and fuzz from the fruit, ...


    By Integrated Engineers Inc.

  • Understanding the impacts of allocation approaches during process‐based life cycle assessment of water treatment chemicals

    Chemicals are an important component of advanced water treatment operations not only in terms of economics, but also from an environmental standpoint. Tools such as life cycle assessment (LCA) are useful for estimating the environmental impacts of water treatment operations. At the same time, LCA analysts must manage several fundamental and as yet unresolved methodological challenges, one of ...


    By John Wiley & Sons, Ltd.

  • Electrocoagulation in Water Treatment

    Although electrocoagulation (EC) is an evolving technology that has for the past 100 years been effectively applied in industrial water treatment, the paucity of scientific understanding of the complex chemical and physical processes involved as well as the limitations (in terms of size and cost) of the needed power supplies in the past, have curbed large scale applications and hindered progress. ...


    By IWA Publishing

  • Water treatment in Brazil

    The challenge Many factories in Brazil do not dispose their sewerage in a professional way. Only big enterprises use facilities to treat their industrial waste water, whereas numerous small and medium-sized enterprises convey their sewerage flow into rivers and brooks or pit drainages. This results in a significant environmental burden and endangers the health of the population. ...


    By EnviroChemie GmbH

  • Minimizing Arsenic Leaching from Water Treatment Process Residuals

    Ferric chloride addition was investigated for treatment of As-laden spent regeneration brine from ion exchange processes. Furthermore, varying conditions and calcium addition were investigated for the stabilization of the resulting As-laden solids. Arsenic, sulfate, bicarbonate, and chloride concentrations in the spent brine (300 mg/L, 605 mg/L, 305 mg/L, and 24 g/L, respectively) were orders of ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you