produced water equipment Articles

  • Reasons to choose Trenchless Pipe Bursting Repairing Equipment

    Trenchless technology has altered the industry, revolutionizing sewer pipe repair and gaining the favor of many property owners today. No digging, no re-landscaping, no use of chemicals- the trenchless strategy is far better than the traditional approach. In the developing business sector, pipe repair companies need the most effective equipment to stay competitive. The ...


    By TRIC Tools Inc.

  • Shell - produced water treatment

    Client: Shell Auk CETCO Oilfield Services mobilised an 18” diameter twin vessel CrudeSep® test skid and a RFV 3000 adsorption skid comprising of dual sock filter pods and two vessels holding adsorption media canisters. The CETCO equipment was tied in downstream of the existing WEMCO and hydrocylones and successfully treated produced water at a variety of rates. Samples were taken from a variety ...


    By CETCO Energy Services

  • Case study - Procurement and installation of a Biogas desulphurization unit at the Chania WWTP

    A proposal based on Bioconservacion’s technology was selected as the winning bid in the public tender released in 2015, covering the design, procurement and construction of a biogas desulfurizing unit to be installed in the waste water treatment plant in Chania, Greece. With a population over 100,000, Chania is the second largest municipality in the Greek island of Crete. Its waste water ...


    By Bioconservacion SA

  • Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response

    The Western European nation has 20 mobile diesel-driven pumps on standby, ready to assist in national and international emergencies. One of the smallest and most densely populated countries in Western Europe, the Netherlands has nearly 10 million residents who live and work below sea level. Without active water management and primary flood defenses, ...


    By BBA Pumps

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • BBA Mobile Emergency Pumps Provide Rapid Response for Floods

    Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response In its latest edition, the North American PUMPS & SYSTEMS magazine publishes an in-depth article featuring the history and current usage of emergency mobile pumps. The Western European ...


    By BBA Pumps

  • Cogen plant produces distilled water

    The Facility Tenaska IV Texas Partners cogeneration facility in Cleburne, Texas is a producer of electricity at a combined cycle plant. The Problem Tenaska wanted their Cleburne plant to be a Qualified Facility (QF). To achieve this, they elected to produce distilled water using the steam from the power generating equipment. A distilling plant using ...

  • Determining Proper Cooling Tower Size

    To maximize water-based cooling tower benefits, the appropriate tower size must be selected, requiring the identification of several critical factors. Cooling towers are a relatively inexpensive and reliable way of expelling heat from a number of industrial processes, including nuclear & thermal power plants, petroleum refineries, petrochemical plants, food processing plants, as well as HVAC ...


    By Delta Cooling Towers, Inc

  • Creating a diversion - creating a bypass to treat produced water

    ProblemAn oil company needed to repair its water treatment equipment without curtailing oil production. SolutionCETCO Oilfield Services created a bypass that allowed the oil company to continue operations during repairs. Here’s what we did: Identified an accessible section of piping upstream of the equipment to be repaired. Made 4 hot-tap ...


    By CETCO Energy Services

  • Cogen plant produces distilled water for resale

    The Facility Panda Energy’s power plant located in Brandywine, Maryland is a cogeneration facility that produces electricity by using gas and steam turbines. The Problem The objective of Panda Energy was to achieve Qualified Facilities (QF) status at their Maryland location. To achieve this, they had to produce distilled water using the steam from ...

  • BP Petrojarl Foinhaven - produced water treatment

    Client: BP/PGS Petrojarl Foinaven - UK CETCO were approached by BP/PGS regarding potential fluids handling problems on the Petrojarl Foinaven FPSO when bringing on two new wells during September 2001. CETCO mobilised a RFV 4000 DF Adsorption Skid containing CETCO’s patented CrudeSorb® media to treat the oily water phase of the well returns for discharge directly overboard. During a two week ...


    By CETCO Energy Services

  • Produced water treatment from a to Zinc - reducing levels of Zinc in a produced water stream

    Problem At vast depths, the ocean floor consists of layers of decaying plant and animal matter, containing chemicals like sulphate and zinc, which has built up over the years. When operators are drilling, the matter is disturbed and the various chemicals are released into the water. Since the mid 1980’s the pace of exploration, production, and development in the deep waters of the Gulf of Mexico ...


    By CETCO Energy Services

  • New process for Reusing produced wastewater

    Abstract: In November 2002, a new facility at the Liaohe Oilfield in Liaoning Province, China was commissioned to treat 20,000 m3/day of produced wastewater. The aim of the process is to provide water quality which is suitable as feed water for the high pressure, once-through steam generators. The performance during the first 8 months of operation has been demonstrated. Due to the unique ...


    By Eco-Tec Inc.

  • Water treatment in a pinch - installing a temporary produced water polishing system

    An oil company experienced produced water treatment system upsets and CETCO Oilfield Services was chosen to deliver and operate a temporary treatment system until problems with the permanent installation could be resolved. CETCO Oilfield Services personnel and equipment arrived on the platform, set up their reliable produced water polishing system, and began operations. CETCO personnel were on ...


    By CETCO Energy Services

  • Producing Green Energy: Must Have

    In today’s world, everything we do almost revolve around power and power generating equipment are very necessary for that matter. Industrial, commercial and residential needs drive the need for the generation of power and power equipment. There is a very rapid growth of this need which begins in huge plants and then is disbursed using power lines to substations and finally to the ...


    By Greenshine New Energy LLC

  • Cooling Water System at Major Canned Food Producer in the United States

    Cooling operation for canning line replaces stabilized bromine and achieves greater biological control. LOCATION Tomato Canning Plant in California, USA EQUIPMENT & CHEMISTRY Vault M15 MIOX’s Mixed Oxidant Solution (MOS) PREVIOUS DISINFECTION Bromax 7.1 (Stabilized Bromine) ...


    By MIOX Corporation

  • Novel ion-exchange system softens produced water for steam generation

    As California entered a period of severe drought in 2008, the challenges of using thermal methods to extract heavy oil became compounded by the difficulty of securing freshwater sources from which to generate the high-quality steam that these methods require. In an effort to manage the crisis, then-Gov. Arnold Schwarzenegger proclaimed a state of emergency and enacted widespread ...


    By Eco-Tec Inc.

  • Water Treatment Equipment Markets in China

    China’s demand for Water Treatment Equipment has grown at a fast pace in the past decade. In the next decade, both production and demand will continue to grow. The Chinese economy maintains a high speed growth which has been stimulated by the consecutive increases of industrial output, import & export, consumer consumption and capital investment for over two decades. This new study ...

  • Dry mortar produced according to the state of the art

    Oradea – a town in Northwestern Romania, near the Hungarian border, is the birthplace of Adeplast, a Romanian group of companies. In 1996, Marcel Bărbuţ, became the majority shareholder of the company established in 1994 under the name Multistar Prod S.R.L. and transformed it into a Romanian-Austrian company. The link to Austria is obvious with Marcel Bărbuţ, ...

  • Field-Proven Removal of Dissolved Hydrocarbons from Offshore Produced Water by the Macro Porous Polymer-Extraction Technology

    At the moment there are no field proven technologies available to remove dissolved hydrocarbons (aliphatics and mainly aromatics) from produced water on offshore platforms. Following a joined study of the NOGEPA (The Netherlands Oil and Gas Exploration and Production Association) and the Dutch Government, the Macro Porous Polymer Extraction (MPPE) technology was selected from 55 technologies as ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you