produced water reuse system Articles

  • New process for Reusing produced wastewater

    Abstract: In November 2002, a new facility at the Liaohe Oilfield in Liaoning Province, China was commissioned to treat 20,000 m3/day of produced wastewater. The aim of the process is to provide water quality which is suitable as feed water for the high pressure, once-through steam generators. The performance during the first 8 months of operation has been demonstrated. Due to the unique ...


    By Eco-Tec Inc.

  • Pulp & Paper Water Treatment - A look at optimizing water resource management

    Application Case Study (Pulp/Paper Operations) The pulp and paper industry has traditionally been a consumer of large amounts of fresh water and power. Recently, increased focus has been given to the optimized efficiency of paper mills and to the environmental sustainability footprint of the industry. Therefore, water resource management has become a more critical factor ...

  • Evaluation of hybrid treatments to produce high quality reuse water

    Four tertiary hybrid treatments to produce high quality reused water, fulfilling Brazilian drinking water regulations, from a slaughterhouse's secondary treated effluent were evaluated. The pilot plant with a capacity of 500 L h−1 was set up and consisted of these stages: pre-filtration system (cartridge filter 50 micron, activated carbon filter, cartridge filter 10 micron), oxidation (H2O2) or ...


    By IWA Publishing

  • Evaluation of Potential Benficial Reuse of San Ardo Produced Water

    ABSTRACTThe goal of this DOE, Aera Energy LLC, and Kennedy/Jenks Consultants funded project was to evaluate the potential for treatment and beneficial reuse of produced water from an oilfield in San Ardo, California. A 10 - 30 gpm reverse osmosis (RO) pilot plant was constructed and operated for nine months. The key constituents of concern include total dissolved solids (7000 mg/l ...

  • Water Reuse Terminology

    All water on Earth is used and reused, over and over, in an elegant water cycle. Water reuse occurs in various ways on a daily basis. It happens when a community’s treated wastewater is discharged into rivers or other water bodies. If you live in a community downstream of another, chances are you are reusing water from an upstream town. Scientifically proven advances in water technology ...


    By WateReuse

  • Removal of dissolved and dispersed hydrocarbons from oil and gas produced water with MPPE technology to reduce toxicity and allow water reuse

    Abstract Legislation worldwide and current technologies used in the treatment of offshore oil and gas/condensate produced water are mainly aimed at the removal of dispersed hydrocarbons (dispersed oil). From the beginning of this century, new insights in the North Sea area revealed that specific contaminants in produced water are toxic and their impact on the environment was assessed. This ...

  • Water Reuse Options for Industrial Plants

    Water can be a high cost commodity for an industrial operation.  In addition, industrial water consumption uses approximately 22% of water worldwide, a percentage that bothers water-conscious customers. To cut back on costs, as well as reduce environmental impact, industrial plants are considering water reuse. Plants have several options when it comes to water reuse, which  ...


    By KLa Systems, Inc.

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Economic analysis of the reuse of water reclamation in the irrigation of vineyards

    The objective of the present work is to determine the economic viability of the System for the Reclamation and Reuse of Wastewater (SRRWW) in the village of Colera in Girona, Spain. The methodology applied covers the identification, quantification and economic evaluation of different impacts, private and external, and allows the most beneficial options to be selected. Reusing the reclaimed water ...


    By Inderscience Publishers

  • Drinking rainwater and reusing wastewater

    Decentralized systems for drinking water processing could make a significant  contribution to the Millennium Development Goals. With the water concept in “self”, Eawag has demonstrated that membrane technology offers the chance to do just that. Lack of drinking water hygiene is one of the main sources of disease transmission worldwide, and in many situations centralized plants ...


    By IWA Publishing

  • Evaluation of Advanced Water Treatment for Indirect Potable Reuse

    The City of San Diego (City) and MWH recently completed a 18-month pilot testing program to determine the effectiveness of a three-step Advanced Water Treatment (AWT) process to produce water suitable for indirect potable reuse from tertiary water produced at the North City Water Reclamation Plant (NCWRP). This testing program was conducted as part of the City’s Water Reuse Study, which was ...

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • MBRs and Membranes for Industrial Water Reuse in California

    ABSTRACTOver the last few years, membranes have become the preferred treatment technology in municipal water and wastewater treatment. However, industrial treatment processes have continued to rely on conventional techniques. With recent improvements in membrane technologies, and with more stringent discharge requirements for industrial systems, membranes are ...

  • How is biodiesel produced?

    This article is the first in a series that will take a close look at alternative fuels production and source materials. Over the next several months, we will cover natural gas, propane, ethanol, hydrogen, and fuel cells. This month, we will focus on biodiesel. Methods for creating fuels from renewable biomass feedstocks have been used since the 1800s. Vegetable oils were used in diesel engines ...

  • Advanced Water Treatment and Evaporation Systems Produce High Efficiency

    AQUATECH IS CHANGING THE GAME in the water recycling industry through its SmartMOD Modular Evaporator System and HEVAP High Efficiency Evaporation Process for SAGD Water Treatment. For over 30 years, the company has focused exclusively on desalination, water reuse, and zero liquid discharge with water purification technologies suited for global industrial, upstream and ...

  • Utilizing unconventional water sources for industrial reuse

    Reclamation and reuse of unconventional wastewater sources for plant raw water, cooling water and process pre-treatment has increased substantially due to increases in the cost of drinking water, recurring water shortages that can impact business operations, and tightening government regulation. Water is required in almost every industrial sector for the processing and manufacture of products. ...


    By WesTech Engineering, Inc.

  • Waste Water Recycle/Reuse Project (Tap Water) – Phuket, Thailand

    Producing high quality water from Municipality Waste Warer in Phuket Thailand a famous Tourists Destination. W.O.G Group has been awarded a Waste Water Recycle/Reuse Project by Patong Municipality, Phuket, Thailand to increase municipal water supply in Phuket. CLIENT’S OBJECTIVE: To treat sewage water (25 MLD) to the same quality standards as that supplied by the ...


    By WOG Technologies Inc.

  • Reuse of Wastewater: Johnson & Johnson Medical

     Johnson & Johnson Medical's Sydney plant is recycling water previously discharged from its water purification system. The project demonstrates that common sense 'low-technology' options for recycling industrial process water can ease pressure on both water supply and sewerage systems, and save money at the same time. Background Johnson & Johnson Medical (J&J) ...


  • Higher Filter Loading Rates for Greater Water Reuse Capacity

    This research project is designed to provide a systematic approach to determine the effect on recycled water quality of varying filter loading rates—and as influenced by other routinely monitored plant performance parameters. Data obtained from pilot filters in Phase 1 (during the first two years) indicate that a higher loading rate is capable of producing acceptable quality tertiary recycled ...

  • Building/hotels – process water reuse application case studies

    Issue/Challenge A large resort in Mexico wanted to minimize the cost of their potable and process water used in their operations. The company had been using a single pass RO system from a well water source which provided permeate water to their water storage tank. This system was inefficient, producing only 50% of clean water production with the remaining 50% being sent to the municipal ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you