pulse-jet filter Articles

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

  • Filter Your Air with Cartridge Dust Collector

    A cartridge dust collector uses filtering cartridges and is a self-cleaning dust collector. The cartridges it uses are made from synthetic fibers and cellulose that is treated chemically. This ensures the particles are efficiently collected without forming an excessive pressure drop in the system. Structure A cartridge dust collector uses an air-jet cleaning structure to preserve ...


    By ProVent, LLC

  • Chemical-Free Treatment of Recirculating Water Using Pulsed-Power

    Untitled Document Regulatory pressures and economic considerations require industry to become cleaner, more efficient, and more environmentally benign. Such operating principles advance not only ...


    By Dolphin WaterCare

  • Rolled Filters Move Filtration in a New Direction

    When selecting filtration technology, industrial users have long wrestled with the tradeoffs of dirt-holding capacity versus particle selectivity or quick-and-dirty change-outs versus process time. For many applications, a self-contained rolled filter offers an effective solution to both problems. Constructed with polypropylene hardware and various media in a spiral-wound design, rolled filters ...

  • A novel harmonic mitigator-based 12-pulse rectification for vector-controlled induction motor drives

    This paper presents an optimised 12-pulse autotransformer-based AC–DC converter with reduced kVA magnetics for reducing the harmonic distortion in AC mains current in a vector-controlled induction motor drive (VCIMD). The proposed AC–DC converter results in elimination of fifth, seventh and 11th harmonics in the supply current. The proposed system consists of an autotransformer and a tuned ...


    By Inderscience Publishers

  • Sub and super-synchronous wind turbine-doubly fed induction generator system implemented as an active power filter

    This paper deals with a wind energy conversion system (WECS), based on a doubly fed induction generator (DFIG) and an electromechanical active power filter (APF). The objective is to respond simultaneously to electric energy requirement and power quality concerns. The proposed WECS is able not only to track the maximum power point of the wind energy but also to dampen harmonic currents from the ...


    By Inderscience Publishers

  • 5 Must Do Steps to Keep Your Jet Aeration System Running Smoothly

    Sustained low dissolved oxygen levels in an aeration tank can cause a host of problems — including difficulties in maintaining soluble BOD (biochemical oxygen demand), reduced nitrogen removal efficiency, and challenges with biomass separation. A jet aeration system offers a solution, utilizing both a pump and blower to meet the oxygen transfer requirements of a biological process. A well ...


    By KLa Systems, Inc.

  • The Use of Particulate Emission Monitors to Support Arrestment Plant Operation and Upkeep

    The operation of filtration type arrestment plant can be optimised by the effective use of Particulate Emission Monitors (eg Filter Leak Monitors and Filter Performance Monitors). Particulate Emission Monitors are installed throughout the broad spectrum of industrial processes to satisfy regulations (IPPC, Part B Guidance Notes, WID and LCPD) for emission limit enforcement. In addition, where ...


    By PCME Ltd

  • Advantages of cleaning without a venturi in baghouse collectors

    ABSTRACT: Background The cleaning cycle is the most important part of the dust collector because it controls efficiency and media life. In order to clean a row of bags in a reverse pulse jet baghouse first the flow of filtered air must be momentarily stopped and then back flushed or “induce” air to knock the dust cake off the outside of the filter media. A venturi at the top of the ...


    By Scientific Dust Collectors

  • Improving the cleaning cycle in baghouse collectors

    ABSTRACT: Background The reverse pulse jet baghouse has been around for over 45 years and the cleaning cycle has not changed very much since that time. The cleaning cycle is the most important part of the dust collector because it controls efficiency and media life. In a generic baghouse, the cleaning system is comprised of a blowpipe that is located typically approximately three inches above ...


    By Scientific Dust Collectors

  • Fine particle capture in biomass boilers with recirculating gas cyclones: Theory and practice

    This paper addresses the theoretical development and experimental validation of optimized recirculating reverse-flow gas cyclones. The simulation of these systems is based on the predictive properties of a finite diffusivity model, modified to include partial recirculation of the cyclones' emissions. Experimental validation was obtained at laboratory and pilot scales at low temperatures (up to ...

  • Advances in control of PM2.5 and PM2.5 precursors generated by the combustion of pulverised coal

    Particulate matter smaller than 2.5 mm in aerodynamic diametre (PM2.5) from coal-fired boilers is composed of directly emitted (primary) particles and particles formed from precursors (secondary particles). Technologies to reduce emissions of precursors to secondary PM2.5 emitted by coal-fired utility plants include wet and dry flue gas desulphurisation (FGD). Limestone forced ...


    By Inderscience Publishers

  • Pilot and Industrial-Scale Experimental Investigation of Numerically Optimized Cyclones

    A new geometry of reverse-flow gas cyclones obtained by numerical optimization was shown at the laboratory scale to be significantly more efficient than other high-efficiency designs. However, it is usually recognized that experimental results obtained with laboratory-scale or sampling cyclones cannot be extrapolated to pilot or industrial scales. The present paper confirms, at these larger ...

  • New Nozzle Technology “Cleaning More with Less”

    This technical paper will explain the new nozzle technology developed by Scientific Dust Collectors that allows high air-to-cloth ratio baghouses to use 80psig of compressed air instead of the industry standard 100psig.   The reverse pulse jet baghouse has been around for over 50 years and the cleaning cycle has not changed very much during that time. The cleaning cycle is the most important ...


    By Scientific Dust Collectors

  • Laboratory, pilot and industrial-scale validation of numerically optimized reverse-flow gas cyclones

    This paper addresses the experimental validation of the optimum design of reverse-flow gas-cyclones, obtained through the solution of a numerical non-linear optimization problem, viz. maximizing cyclone collection. The simulation model is based on the predictive properties of a finite diffusivity model, where the particles' turbulent dispersion coefficient is estimated through an empirical ...

  • Power Inverter Basics

    Basic knowledge of power inverter Power inverter mainly adopts the PWM at present, controller switch to DC rapidly in a pulse-period to ensure that the DC integral value is equal to the sampling values of AC sine wave at the same time. After filtered, more than 96% sine wave output can be realized. Pulse inverter is self-excited inverter that output voltage is pulse modulation. This kind ...


    By GoHz Inc

  • Four years experience with a new chlorine dosing regime against macrofouling

    A new method of chlorination called Pulse-Chlorination® was developed by KEMA in 1998. Pulse- Chlorination is based on the principle that mussels and clams, in general have a recovery period before full opening and start filtering after exposure to a chlorination period. The chlorination method takes advantage of this recovery time by using short successive periods of chlorination, alternating ...


    By Sweco Nederland BV

  • Air filtration applications for membranes

    Given their unique performance attributes membranes are finding use in a growing number of high efficiency air filtration applications. One example is in respirators and personal protective equipment. Applications where intense physical demands and risk of exposure to harmful contaminants are present demand the high efficiency / low pressure drop combination of expanded polytetrafluoroethylene ...

  • Modified stator flux estimation–based direct torque controlled induction motor drive with constant switching frequency operation

    A space vector pulse width modulated (SV–PWM) direct torque controlled (DTC) induction motor drive, having reduced torque ripple even at low operating speeds and maintaining constant switching frequency has been studied and implemented with a modified stator flux estimation scheme. It utilises a compensator for the phase and magnitude error introduced by low pass filter, which is being used to ...


    By Inderscience Publishers

  • Power quality problem mitigation by unified power quality conditioner: an adaptive hysteresis control technique

    An adaptive hysteresis current and voltage control technique for controlling Unified Power Quality Conditioner (UPQC) is proposed in this paper. The novelty of the proposed method is the series and shunt active power filters (APF) present in the UPQC has been controlled by the separate adaptive controllers for reducing the voltage and current perturbations. Here, the adaptive control technique ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you