pump manufacturer Articles

  • Fire Codes: A Foundation of Safety for a Rapidly Changing World

    Chief among these safety features is fire protection. There are myriad codes and regulations relating to fire safety in commercial buildings, from standards on portable fire extinguishers to the installation of stationary pumps for fire protection — the U.S.- based National Fire Protection Agency (NFPA) alone has more than 300 consensus codes that have been adopted in whole or in part ...

  • Changing the Rules with Mass Detection

    How simplified detectors can provide mass data for every analytical run and speed up method development With access to multiple mass spectrometry systems of varying degrees of sophistication, Davy Guillarme (University of Geneva, Switzerland) wasn’t actively looking for new mass detection solutions. Nevertheless, the Waters ACQUITY QDa mass detector caught his eye. Why? Because it opens a ...


    By Waters Corporation

  • The Clog Blog

    Clogging and over pressuring are definitely problematic for Liquid Chromatography columns. Back in 2005 John Dolan’s sage advice to chromatographers to make an LC column last forever was simple, “Never open the box!” As John pointed out, this is not practical and I have to agree. But as an LC column manufacturer I have seen remarks from customers regarding clogging as though it ...


    By Restek Corporation

  • Pumps Manufacturing of the Future

    Sulzer builds pumps of the highest quality but also responds to the customers’ requirements for short lead times, close proximity, and competitive prices. Now, Sulzer is revolutionizing its pump manufacturing with a new setup of its factories. The new structure of Sulzer’s global manufacturing network consists of three factory families: Engineered pumps ...


    By Sulzer

  • Industrial Peristaltic Pumps reduce the cost of ownership for paper and packaging manufacturer

    Challenge A leading paper and packaging manufacturer in Australia was using Air-Operated Double Diaphragm (AODD) pumps to deliver 4-colour ink to its printers. The on-site AODD pumps were using considerable amounts of compressed air and required constant maintenance due to the wearable parts (seals and valves). This was resulting in unacceptable long downtimes and high cost: for repair and ...

  • Making the right pump purchase decision for lube oil manufacturers

    Lube oil manufacturing plants are being built or expanded around the world to cope with increasing demand – most of which originates in Asia. Perhaps not surprisingly, China is projected to win the top spot from the USA in lubricant consumption within 6-7 years. And in India, the third-largest market in the world, annual demand has recently topped 2 billion liters. In both countries, demand ...


    By DESMI A/S

  • APEX – Peak performance from the market leading hose pump manufacturer

    Decades of experience and knowledge have combined with closely scrutinised customer feedback to deliver APEX, three new hose pumps from Bredel, part of the Watson-Marlow Fluid Technology Group. Designed to suit all dosing, metering and transfer applications from 2.8 to 1,200 litre/hour across a broad range of applications, the new APEX pumps are now the first choice for processing plants the ...

  • Manufactured sand as an alternative to river sands

    The introduction of a new EvoWash sand washing plant from CDE has eliminated traditional barriers for Poabs Granite Products, allowing them to produce commercial in-spec concrete sand. Much of the sand supplied to the market in the Kaliyal region of India has traditionally been dredged from rivers. With growing pressure to reduce the environmental impact of such activities and ever increasing ...


    By CDEnviro

  • Ammonia Scrubbing Semiconductor Manufacturing 101

    Semiconductor chip manufacturing utilizes a variety of inorganic acids and ammonia solutions. Mixing of acid gases and ammonia in a ventilation system can result in a as phase reaction producing very fine particulate that is ifficult and expensive to remove. For this reason a large emiconductor foundry on the west coast decided topre-treat the exhaust from the ammonia sources prior o mixing with ...

  • Brick Manufacturer Wastewater Case Study

    Manufacturing Wastewater Treatment Case Studies Brick Processing Manufacturer Wastewater Treatability 10.16.2009 The Morin Brick ...


    By Integrated Engineers Inc.

  • Mono nov wipes out delays for detergent manufacturer

    Flexichem produces a range of detergents at its base in Cheshire, for use in transport, catering, textile, foodand brewing industries, these are sold under different brand names. Having encountered delays using a gravity feed method to fill containers, Flexichem approached Mono to provide a solution. Versatility and durability were keyfactors in the decision to use a compact progressing cavity ...

  • S. Dyrup & Co. A leading paint manufacturer

    One of Europe’s leading paint manufacturers inaugurates new facility: S. Dyrup & Co. select magnetically coupled ROTAN pumps. The summer of 1998 – S. Dyrup & Co., one of Europe’s leading producers of paint and lacquers, installs an advanced plant for manufacturing solvent based paint and wood preservative. ...


    By DESMI A/S

  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Dynatec Provides Complete System for Aerospace Manufacturer

    Dynatec is engaged to provide a comprehensive water and wastewater treatment solution for an aerospace manufacturing process. Background Goodrich Aerospace was relocating a manufacturing facility that performs surface treatment for aircraft metal parts. The facility produces about 150,000 gallons per day of wastewater that contains hexavalent chrome, titanium, and other ...


    By Dynatec Systems Inc.

  • Groundwater contamination of 1,1,1-TCA, PCE - Manufacturing facility

    LOCATION:  Glen Cove, New YorkPROJECT DATE:  September 2000 to presentCLIENT:  Confidential BACKGROUND: Groundwater in a sand and gravel aquifer beneath this active manufacturing facility was contaminated with 1,1,1-TCA (concentrations up to 480 mg/L), PCE, and their degradation products. The site owner, faced with a long term (in excess of 100 years) and expensive pump and treat ...


    By Terra Systems, Inc. (TSI)

  • Engine manufacturer saves $200,000 per year

    The Problem: A “Big 3” engine manufacturer was dumping their 140,000 gallon central coolant system over shutdown every year. As oil contamination, metal fines, and aluminum soaps built up in the fluid, plant engineers noticed that surface finish decreased and tooling usage increased. As a remedy, the system was dumped, cleaned, and recharged with fresh coolant. With a ...

  • Petrochemicals Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Pump it up

    Aligning itself with a major equipment supplier and dealer helps the company access the tools and expertise it needs without risking too much capital. Aquatech is the distributor for Godwin Pumps of America in Ontario, Nunavut, Newfoundland and Eastern Labrador, all resource-rich territories. A recent purchase of Godwin by ITT Corporation has expanded the lineup of mine sector pumps. The company ...


    By Aquatech Dewatering Company

  • Inline static mixer simplifies process & reduces cost for yogurt manufacturer

    The increasing popularity of yogurt in recent years-requiring greater production capacity and efficiency-has brought about a need to “re-think” just how best to feed raw materials into mixing and blending systems, and into filling machines. Initially, in most European and U.S. plants, the mixing of milk, yogurt culture, and additives was essentially a hand-batching process. This ...


    By Komax Systems, Inc.

  • Unmixing Water From Waste: The imporance of filters, cartridges and housings as a function of manufacturing

    In manufacturing, water and water-based solutions are regularly filtered for various purposes and outcomes – including for cleaning, cooling, and movement. The filtering process is crucial to quality, performance, and cost savings. With the wrong filter in place, pumps can be destroyed, liquid being filtered can become “unusable” for the intended purpose, cleaning solvents can ...


    By Shelco Filters

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you