pump station Articles

  • Heat Recovery Steam Generators (HRSG) & Blowdown Pump Stations

    Romtec Utilities engineers and supplies pump stations for many different applications for industrial facilities across the country. These facilities range from chemical manufacturing to oil & gas refineries, and power generation is another industrial market where Romtec Utilities excels. We have supplied many different types of pumping systems for power gen facilities for wastewater, ...


    By Romtec Utilities Inc.

  • Puny drain pumping station

    Bedford Pumps Ltd has recently completed the installation of the Mechanical and Electrical plant at a new pumping station at Puny Drain. The drain which is controlled by the East of Ouse, Polver and Nar IDB’s, drains an area of low lying land to the south of Kings Lynn. The recent redesign of the drainage system in the area necessitated the construction of a new drain and pumping station to ...


    By Bedford Pumps Ltd

  • Pump Stations Transfer of Ownership

    The change in ownership of private sewage pumping stations is set to take place from now until October 2016. CountyClean Environmental Services advise on the changes currently underway. Some privately owned pumping ...

  • Pumping Stations, Your Options

    There are many things to consider when thinking about pumping systems in developments, our Pumping Stations Manager talks through the options. Along with budgets, there are many factors to consider when choosing the right pumping station for a development, such as; Technical specifications – how much effluent is the pumping station going to need to remove? ...


    By T-T Pumps Ltd.

  • Pump Station in California - Case Study

    Client: Glorietta Bay Pump Station in Coronado, California Facility:  A Wastewater Pump Station located in a busy public park. Problem: How to eliminate wastewater odors while minimizing the visual impact. Decision: The client chose to use a BOHN BIOFITLE, in-ground biofilter with a grass cover. ...

  • Pumping Station CSI – Case Studies

    These case studies show the results of what happens when modifications to a pumping station are conducted without an engineering investigation, and what can be avoided when one is performed. There are many competing interests for a municipality’s resources and careful decisions have to be made when deciding what needs are to be met. The purpose of the presentation of these case studies is not to ...

  • Case Study: Fighting Wipes at Wonderland Pumping Station

    JWC Monsters never back down in the fight against tough wipes clogs! Problem: Clogged pumps and reweaving of materials Solution: Wipes Ready Channel Monster Dealing with tough debris and clogged pumps and pipes are significant and costly issues for many municipal public works departments. These ...


    By JWC Environmental

  • Case Study: Fighting Wipes at Wonderland Pumping Station

    JWC Monsters never back down in the fight against tough wipes clogs! Problem: Clogged pumps and reweaving of materials Solution: Wipes Ready Channel Monster Dealing with tough debris and clogged pumps and pipes are significant and costly issues for many municipal public works ...


  • Municipal Wastewater Pump Station Design Problems and Solutions

    The growth of the Northern Virginia Area around Washington D.C. has resulted in the requirement for numerous new wastewater pumping stations and the upgrade and expansion of existing pump stations. This paper presents practical problems and solutions associated with the following pump station design issues: 1.) Concrete Corrosion Protection, 2.) Corrosion Resistant Materials, 3.) Pump Protection ...

  • Raffinate Booster Pump Station case study

    Confidential Client Southwest, USA The Southwest is home to several large producers of copper cathode from leaching and subsequent electro-plating, a process known as solution extraction and electro winning (SX/EW). The first step – leaching, begins by sprinkling a low concentration of sulphuric acid and water solution on a stockpile of ore. The liquid ...


  • One Forcemain – Multiple Sewage Pumping Stations

    The sewage collection system for the community of Port Perry Ontario includes several sewage pumping stations conveying wastewater to the existing aerated sewage lagoons for treatment.  Initially the system originally included two sewage pumping stations pumping from the Community directly to the lagoons; the Water Street Pumping Sewage Station and the Cawker’s Creek Sewage Pumping Station. ...

  • Pump Station Biotrickling Filter Odor Control

    Odor Complaints Eliminated at Florida Lift StationEffective Control of Odor Surges to 800 ppmv H2S$50,000 Savings IntroductionNumerous cities and counties in central Florida are experiencing explosive growth. Examples abound in articles in Florida newspapers. Population is growing “by leaps and bounds” per the Seminole Chronicle (6/9/06) ...


    By Lantec Products, Inc.

  • Suwanee Creek pumping station, Gwinnett County, GA

    That's high head," says Roger Toebben, P.E., about the 350 feet of total dynamic head handled by the Suwanee Creek Pumping Station, which has been up and running since January 2001. "There are a few sewage pumping stations like this, but they're not real common." Very high static head and a long force main (42,500 feet) led to the notably elevated dynamic head, which meant that a ...


  • East hull pumping station case study

    Client: Yorkshire Water CSG provided two 1200mm Hydraulic Cylinder Gate Valves as part of the East Hull Pump Station overhaul. CSG worked in partnership with Pacific Valves Ltd on the £16m flood prevention project commissioned by Yorkshire Water. Due to the low ground levels in and around Hull flooding can often be an issue. The new pumping stations will help control drainage in the ...

  • THE BACTAERATOR™ - for odour and blockage free pumping stations

    Cleveland Biotech Ltd, market leaders in the field of applied environmental biotechnology, have developed another market leading application system - The Bactaerator™. Sumps, wet wells and pumping stations provide continual problems to all those responsible with managing and maintaining them, from pubs and supermarkets to drainage ...


    By Cleveland Biotech Ltd.

  • J530 Kingston Lyle sewage pumping station

    New installation of SciNox Dosing Cube and 400 l storage tank in sensitive area Client: Thames Water  Area: Wantage The client required a temporary dosing system until planning permission was approved for a septicity control system. The pumping station is based underground and is on a bridle path for thorough-bred race horses.  Any road ...


    By WES Ltd / Weschem Ltd

  • Pump Stations: CSV vs VFD case study

    None of the problems associated with VFD exist when using a Cycle Stop Valve for control. With a CSV, the motor is always spinning at full RPM, but the amps are reduced similarly to varying the speed. When the motor is spinning at full speed, the cooling fan always provides adequate cooling. Spinning at full speed also means there are no problems with resonance frequency vibrations. Running on ...


    By Cycle Stop Valves, Inc.

  • North Creek pumping station, King County, WA

    The new North Creek Pumping Station in King County, Wash., had to maintain the Department of Natural Resources' national reputation for outstanding reliability. To make sure it did, the design team applied the most advanced pump technology and vibration prevention methods. And the designers and utility put extra attention on meeting operations and maintenance needs. "We included folks from ...


  • Decision support system for main pumping station control, BOS Delfland

    The waterboard Delfland uses a DSS to automatically control the 7 pumping stations in its main canal system. Delfland manages a small part of the dutch watersystem in the south-west of the country. The area is mostly below sealevel and it is intensively used, for residential areas, greenhouses and industry. It is only 400 km/2, yet houses 1,6 million inhabitants, multiple cities among which the ...


    By IWA Publishing

  • Gordy Pump Station - St. Mary Parish Gordy, LA case study

    The first levee armoring project designed by the New Orleans District of the Corp of Engineers (COE) post Hurricane Katrina utilized Armor-Max®, an Anchored Reinforced Vegetation System. It was installed in December 2006 on the land side of the levee to prevent erosion from overtopping. ArmorMax® is a combination of a high performance turf reinforcement mat (HPTRM) and earth percussion ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you