pump station level controller Articles

  • Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response

    The Western European nation has 20 mobile diesel-driven pumps on standby, ready to assist in national and international emergencies. One of the smallest and most densely populated countries in Western Europe, the Netherlands has nearly 10 million residents who live and work below sea level. Without active water management and primary flood defenses, ...


    By BBA Pumps

  • BBA Mobile Emergency Pumps Provide Rapid Response for Floods

    Netherlands’ Mobile Emergency Pumps Provide Rapid Flood Response In its latest edition, the North American PUMPS & SYSTEMS magazine publishes an in-depth article featuring the history and current usage of emergency mobile pumps. The Western European ...


    By BBA Pumps

  • Decision support system for main pumping station control, BOS Delfland

    The waterboard Delfland uses a DSS to automatically control the 7 pumping stations in its main canal system. Delfland manages a small part of the dutch watersystem in the south-west of the country. The area is mostly below sealevel and it is intensively used, for residential areas, greenhouses and industry. It is only 400 km/2, yet houses 1,6 million inhabitants, multiple cities among which the ...


    By IWA Publishing

  • East hull pumping station case study

    Client: Yorkshire Water CSG provided two 1200mm Hydraulic Cylinder Gate Valves as part of the East Hull Pump Station overhaul. CSG worked in partnership with Pacific Valves Ltd on the £16m flood prevention project commissioned by Yorkshire Water. Due to the low ground levels in and around Hull flooding can often be an issue. The new pumping stations will help control drainage in the ...

  • North Creek pumping station, King County, WA

    The new North Creek Pumping Station in King County, Wash., had to maintain the Department of Natural Resources' national reputation for outstanding reliability. To make sure it did, the design team applied the most advanced pump technology and vibration prevention methods. And the designers and utility put extra attention on meeting operations and maintenance needs. "We included folks from ...


  • Water Level Monitoring and Control Solutions for the UK Internal Drainage Boards

    Pulsar Process Measurement have been involved in design, manufacture and supply of non-contacting Ultrasonic Level and Pump Control systems for the Internal Drainage Board industry for many years. Three typical examples of the application of this equipment are installed at North Level IDB Cross Guns Pumping Station. The original Cross Guns Pumping Station was built in 1938 to house three 760mm ...

  • Seabank Power Station, Great Britain

    The challenge was big: For the gas and steam power station in Bristol, Great Britain, that went on stream at the end of the year 2000, the waste water of a near-by sewage plant had to be used as cooling water. Siemens PLC, the designer of the 750 megawatt Seabank Power Station, engaged Grundfos Alldos for this complex and extensive task in chemical engineering. Start of the gigantic project was ...


  • Lift Station Odor Control Using CARUSOL Treating a Wastewater Collection System in a Mid-Western Township - Case Study

    Summary A mid-western township is responsible for operating and maintaining a combined sewer collection system consisting of 150 miles of pipeline and 28 pumping stations. The township does not treat the wastewater, instead contracting with a neighboring city for this service. The township has two final lift stations that transfer the collected wastewater to the neighboring system ...


    By Carus Corporation

  • Pulsar`s Quantum 3 Brings Integrated Flow Monitoring to Pumping Station Management

    Northumbrian Water has installed Pulsar Process Measurement's Quantum 3 Pumping Station Controller which features, apart from a suite of advanced pump control functions based on Pulsar's non-contacting ultrasonic level measurement, the ability to link in up to four Flow Pulse non-invasive flow monitors. Northumbrian Water has used the system to increase station efficiency by identifying ...

  • Non-contacting Ultrasonic Pumping Station Flow Measurement Saves Money for Dwr Cymru Welsh Water

    Dwr Cymru Welsh Water has benefitted from the unique 'Pumped Volume' feature built into Pulsar's Quantum 2 Pump Station Controller; identifying a flow problem within a pumping station network without the need for expensive Magflow meters. Once the issue was resolved, pumped volume through one of the stations was reduced by 88% , ...

  • Water Level Measurements-Part 1

    Confused about which instrumentation to use in your water level monitoring system? In-Situ offers two categories of pressure sensors for water level measurements: absolute or non-vented sensors, and gauged or vented sensors. They look the same and both measure pressure and water level, but they have drastically different applications, outputs and accuracy. The absolute (or non-vented) water level ...


    By In-Situ, Inc.

  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • Detailed dynamic pumping energy models for optimization and control of wastewater applications

    Despite the increasing level of detail in wastewater treatment process models, oversimplified energy consumption models (i.e. constant ‘average’ power consumption) are being used in optimization exercises. A new dynamic model for a more accurate prediction of pumping costs in wastewater treatment has been developed to overcome this unbalance in the coupled submodels. The model is ...


    By IWA Publishing

  • Pumping Stations - Klargester`s range of package systems are efficient, economical to install and are available on short lead-times to fit in with tight construction schedules

    There are a variety of solutions on the market for properties in the UK that are unable to connect to the main sewer by gravity. However, UK building regulations dictate that pumping stations must be used whenever possible. As a result, pumping stations are the most commonly specified solutions for off-mains developments, ahead of sewage treatment plants, such as the Biodisc, and septic tanks. ...


    By Kingspan Environmental Ltd

  • DLT 2.0 differential level transmitter open letter from a Greyline customer

    The Process: The Municipality of the District of Lunenburg in Whynott's Settlement, Nova Scotia added a septage receiving station to their landfill site. Part of the treatment train is a chlorinated duplex vertical turbine pump station delivering effluent from the sludge processing facility to a field of spray nozzles for dispersion. The pump station has two points of discharge and the ...


    By Greyline Instruments Inc.

  • Landis sewerage authority lift station monitoring case study

    Landis Sewerage Authority (LSA) serves the greater Vineland, New Jersey area. LSA was facing some typical problems monitoring their 23 lift stations. “Phone line problems with our autodialers were increasing almost as fast as Ma Bell's prices,” says Sam Hess, Collection System Plant Manager for the 8.2 MGD authority. “Additionally, every Wednesday when we would test our stand-by ...


    By Mission Communications, LLC

  • Keeping the right level; preventing wastewater spillovers case study

    SmartScan 25 provides a most accurate ultrasonic solution for level measurement of waste water flow in a wastewater plants. Wastewater plants provide the cities water purifying services, to maintain a green environment for the local habitants as well as the natural resources. The amount of wastewater transferred by the local municipalities to the plants is measured daily and therefore demands a ...

  • Desubmerge Your Submersible Pump

    A few decades ago, well, definitely not more than four, a contractor was introduced to electric powered submersible pumps. The crew’s first reaction was, “What! You’re going to throw that electric motor in the water? You’ve got to be crazy!” After a few weeks of getting comfortable with the subs, the whole crew was handling them like ...


    By Griffin Dewatering

  • Water level stabilization in open channels using Chebyshev polynomials and teaching–learning-based optimization

    Water level fluctuations in open channels can cause serious problems for conveyance systems which lead to economical and performance issues. The problem of water level stabilization in open channels containing two pumping stations at both ends is investigated in this paper. The optimal control that should be imposed at one end of the channel to minimize water surface fluctuations due to sudden ...


    By IWA Publishing

  • Adapter bacteria control oil spill in bulk

    Introduction Microbac was called in to advise on a required treatment for an integrated bulk oil handling facility and sea-land terminal, receiving, storing and shipping a wide variety of liquid fuels, inorganic chemicals and petrochemicals, many of which are toxic to microorganisms. The variable and complex waste streams from tank truck cleaning, ballast and tank cleaning discharges from ...


    By Microbac Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you