pvc pipe Articles

  • Pioneering Primer from Plastics Pipe Institute

    With administrative offices located in Dallas, Texas, The Plastics Pipe Institute Inc. (PPI) is the major trade association representing all segments of the plastics piping industry. PPI members share a common interest in broadening awareness and creating opportunities that expand market share and extend the use of plastics pipe in all its many applications. As an association, PPI focuses ...


    By TRIC Tools Inc.

  • Installing and Gluing Flexible PVC Pipe

    Installing and Gluing PVC Flexible (Flex) Pipe In order to get a proper bond and create a full, permanent seal when installing PVC Flex Pipe we have several suggestions. If you abide by these simple instructions you can minimize problems, leaks, and system failures! Ensure the pipe is clean and dry. Wipe away any dirt or dust and water. Use a PVC Primer on the ...


    By Red Flag Products

  • Leak behaviour in pressurized PVC pipes

    The correct definition of the leak law, i.e. the relationship between the leak outflow, the total head at the leak and other relevant parameters such as the pipe material, can seriously affect the accuracy of the numerical models used for the management of water distribution systems, either if they are used to forecast the leakage reduction by pressure management or to locate and size the leaks ...


    By IWA Publishing

  • PVC Pipe Fitting Molding Machines

    1.Specialized PVC plasticization components, hard chrome plated screw, nozzle(with enlarged nozzle hole), and nozzle flange are adopted to ensure the quality of PVC production and extend the life of the mechnaical parts. All the components are highly anticorrosive. 2.Widened safety door design, equiped with double core pulling devices(each one has two inputs and two ...


    By Focare Mould Co.,Ltd.

  • PVC injection molding technology

    PVC injection molding process application: water supply pipe, home appliance pipe, house wall plate, industry machine housing body, electronic products packaging, medical equipments, food package. Injection molding process condition Material dry: usually it don’t need dry. ...


    By Focare Mould Co.,Ltd.

  • Leak detection by inverse transient analysis in an experimental PVC pipe system

    Leakage reduction in water supply systems and distribution networks has been an increasingly important issue in the water industry since leaks and ruptures result in major physical and economic losses. Hydraulic transient solvers can be used in the system operational diagnosis, namely for leak detection purposes, due to their capability to describe the dynamic behaviour of the systems and to ...


    By IWA Publishing

  • PVC pipe fitting mold, collapsible PVC fitting mold, irrigation fitting mold

    PVC pipe fitting mould PVC pipe fitting Mould ( for high pressure and low pressure = for water supplying and water discharging)  1. CPVC pipe fitting mould for high pressure.  2. UPVC pipe fitting ...


    By Focare Mould Co.,Ltd.

  • Leak detection by inverse transient analysis in an experimental PVC pipe system

    Leakage reduction in water supply systems and distribution networks has been an increasingly important issue in the water industry since leaks and ruptures result in major physical and economic losses. Hydraulic transient solvers can be used in the system operational diagnosis, namely for leak detection purposes, due to their capability to describe the dynamic behaviour of the systems and to ...


    By IWA Publishing

  • Size reduction of loose film, hollow containers, barrels, crates, PVC pipes (thin-walled PE / PP pipes), profile, ...

    NEUE HERBOLD granulators (LM series) are specially designed for the size reduction of voluminous, thin walled materials. Typical applications are - the size reduction of loose film ( in-line edge trims) - the size reduction of hollow containers - the size reduction of barrels - the size reduction of crates - the size reduction of PVC pipe (thin-walled PE/PP ...

  • Size reduction of loose film, hollow containers, barrels, crates, PVC pipes (thin-walled PE / PP pipes), profile,

    Neue Herbold LM series granulators are specially designed for the size reduction of voluminous, thin walled materials. Typical applications are - the size reduction of loose film ( in-line edge trims) - the size reduction of hollow containers - the size reduction of barrels - the size reduction of crates - the size reduction of PVC pipe (thin-walled PE/PP pipe) - the size ...

  • PVC-piping promotes growth of Ralstonia pickettii in dialysis water treatment facilities

    Biofilms forming inside dialysis water treatment systems are one of the main sources of microbiological contamination. Among the bacteria found in biofilms, Ralstonia pickettii is frequently encountered in dialysis water treatment systems and has been shown to develop extreme oligotrophic talents. In Austria, R. pickettii was exclusively detected in high numbers in dialysis ...


    By IWA Publishing

  • Index of Joint Condition for PVC push-fit joints

    The Index of Joint Condition (IJC) for polyvinyl chloride (PVC) push-fit joints, discussed in this article, was derived from installation guidelines and from destructive laboratory tests. The IJC is presented in a graphical framework and is a powerful tool to employ in order to visualize and compare, in situ, results obtained during condition assessment of PVC joints. The graphical results ...


    By IWA Publishing

  • Hydro Polymers: Searching for a More Sustainable PVC

    Over the last five years, the European PVC industry has been forced to reassess the environmental impact of its products in the face of continuing pressure from environmental groups, governments and end users. Hydro Polymers, one of two PVC manufacturers in the UK, is forging ahead of its competitors through a partnership with sustainability consultancy The Natural Step. The company is launching ...

  • Quantitative pipe condition assessment with Pipe Penetrating Radar

    Abstract Pipe Penetrating Radar (PPR) is the underground in-pipe application of GPR, a non-destructive testing method that can detect defects and cavities within and outside mainline diameter (>18 in / 450mm) non-ferrous (reinforced concrete, vitrified clay, PVC, HDPE, etc.) pipes. The key advantage of PPR is the unique ability to map pipe wall thickness and deterioration including voids ...


    By SewerVUE

  • pipe fitting mold, irrigation piping system, irrigate fitting mould

    China pipe fitting mold, pipe fitting mould, mould, mold, moulds, molds, tool, plastic mould, plastic mold, injection mould, injection mold, pipe mould, pipe mold, fitting mould, fitting mold, PVC mold, PVC mould, PVC pipe mold, PVC pipe mould, PVC fitting mould, PVC fitting mold, PVC pipe fitting mold, PVC pipe fitting mould, PVC collapsible core, PVC ...


    By Focare Mould Co.,Ltd.

  • plastic pipe fitting mold technology

    “ Forever care you, care your molds”, is our insist mentality philosophy. We insist on mold construction design and steel quality, believe these two factors are main points to achieve mold with excellent performance. produces moulds for PVC ...


    By Focare Mould Co.,Ltd.

  • Combined application of Pipe Penetrating Radar and LIDAR for large diameter pipe inspection

    Abstract: Pipe Penetrating Radar (PPR) is the underground in-pipe application of ground penetrating radar (GPR), a non-destructive testing method that can detect defects and cavities within and outside mainline diameter (>18 in./450mm) non-metallic (reinforced concrete, vitrified clay, PVC, HDPE, etc.) underground pipes. Light Detection and Ranging (LIDAR) has become an accepted method for ...


    By SewerVUE

  • Completing Condition Assessments using In-pipe GPR as Pipe Penetrating Radar

    Abstract This paper describes the development of Pipe Penetrating Radar (PPR), the underground in-pipe application of GPR, a non-destructive testing method that can detect defects and cavities within and outside mainline diameter (>18 in / 450mm) non-metallic (concrete, PVC, HDPE, etc.) underground pipes. The method uses two or more high frequency GPR antennae carried by a robot into ...


    By SewerVUE

  • Failure mechanisms and condition assessment of PVC push-fit joints in drinking water networks

    This paper presents and discusses the significant role played by joints in the failures registered in drinking water distribution networks. The three most important failure mechanisms related are presented and a procedure to detect them through the visual measurement of the gap between pipes inside a joint is proposed. The procedure is proved to be a valuable source of information on joint ...


    By IWA Publishing

  • Company Introduces New Pipe Repair Products

    InduMar Products, Inc., based in Houston Texas, celebrates twenty years of providing pipe repair and rehabilitation solutions to their industrial and marine customers. Well known for their versatile STOP IT® Pipe Repair System the Company also takes pride in offering custom solutions for many pipe leak, reinforcement and corrosion problems. The combination of sealant development and ...


    By InduMar Products, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you