pvc well casing Articles

  • Locate buried monitoring wells case study

    A Phase II Environmental Site Investigation was being conducted at a gasoline station in Fort Myers, Florida. In order to minimize costs, our client intended to use several existing on-site monitoring wells rather than installing new wells. However, five of the existing wells had been covered with asphalt and were no longer visible. GeoView was tasked with performing a shallow geophysical study ...


    By GeoView, Inc.

  • Case Study - Multilevel well system improved understanding of groundwater conditions in deep aquifers

    Westbay System delivered detailed data in less time and at a reduced cost CHALLENGE Characterizing the plume in a shallow  aquifer is simple, but investigating deeper  aquifers poses several challenges. SOLUTION MACTEC evaluated various monitoring  technologies and determined that  Westbay System modular ...


  • Plastics case study - Acro

    Smart Elbow® solves plastics problem Subject ACRO Extrusion Corporation's Wilmington, DE plant. Situation Stainless steel sweep elbows were wearing through at ACRO Extrusion Corporation, causing considerable downtime, product loss, and maintenance expense. The sweep elbows in their pneumatic conveying system were ...


    By HammerTek Corporation

  • Plastics case study - Rensselaer

    Cutting Corners is Easy with New Elbow Design for Piping A simple and inexpensive upgrading of the pneumatic conveying system at the Rensselaer Plastics Co., Rensselaer, IN., is reducing maintenance while saving the company money in a number of ways. Rensselaer Plastics Co. specializes in PVC piping products for the plumbing trade. Annual sales of the company are in the ...


    By HammerTek Corporation

  • STOP IT Building Maintenace - Case Study

    Remember - Call Before Digging: A county school district in Florida used STOP IT® to repair copper and PVC water lines with diameters of 2' and 2½' respectivelly and operating pressures of 80psi. They also used STOP IT® to repair a 3' diameter PVC line that carried fiber optic computer wires. They used two rolls of 2'×12' STOP IT® on each repair. Quote: 'Pipe was broken ...


    By InduMar Products, Inc.

  • The case for water jet tank cleaning

    To maintain a consistently high level of product quality, today's processing plants must ensure that their tanks and reactors are thoroughly cleaned on a regular basis. The direct expenses involved can be substantial, and adding indirect costs {e.g., downtime and compliance with safety and environmental regulations) puts extreme pressure on tight operations budgets. To meet this challenge, more ...


    By NLB Corp.

  • Quarry dewatering compliance - Case Study

    Louis W. Bray Construction installed a Greyline Area-Velocity Flow Meter in 2009 to meet Ministry of Environment regulations. Their permit stipulated effluent limits plus monitoring, sampling and flow measurement of wastewater discharged from the site to the South Raisin river. The Ontario Water Resources Act requires flow monitoring for any quarry dewatering greater than 50,000 liters per day. ...


    By Greyline Instruments Inc.

  • Fluoridation: A Better Way? case study

    Ffficient, cost-effective addition of fluoride to drinking water is increasingly important as the U.S. EPA and Department of Health and Human Services contemplate additional nationwide standards for fluoride injection. A relatively new company, Integrity Municipal Services (IMS), has developed a new design for sodium fluoride saturator and feed systems and has successfully applied it at customer ...

  • Quarry Dewatering Compliance - Case Study

    Louis W. Bray Construction installed a Greyline Area-Velocity Flow Meter in 2009 to meet Ministry of Environment regulations. Their permit stipulated effluent limits plus monitoring, sampling and flow measurement of wastewater discharged from the site to the South Raisin river. The Ontario Water Resources Act requires flow monitoring for any quarry dewatering greater than 50,000 ...


    By Greyline Instruments Inc.

  • Case study - RDF plant Tel Aviv

    Engineering and planning, procurement, production and delivery of the complete plant engineering as well as installation and commissioning. Retention: September 2012 Throughput: 540,000 Mg/a Operational time: at least 6,200 Mg/a Input: municipal solid waste, commercial and industrial ...


    By Eggersmann Anlagenbau

  • Mossy Rock, Washington - in-situ chemical oxidation case study

    Leaking underground storage tanks at the Police Station / City Hall in Mossyrock, Washington contaminated soil and groundwater with gasoline hydrocarbons. A portion of the soil was excavated, but the presence of the building prevented all of the contamination from being removed. After first advancing a series of soil borings to accurately define the target zone, Cedar Creek Engineering installed ...

  • Taos, New Mexico SORB 33® Arsenic Removal Case Study

    Site BackgroundThe Town of Taos, located in northern New Mexico and with a population of 8,000 was awarded an arsenic removal treatment system as part of the US EPA’s Arsenic Removal Demonstration Program in January, 2005. The town had a new well, storage tank and booster pump system that was scheduled to be connected to the Town’s distribution system and placed into service only after the ...

  • Process analytics in vinyl chloride monomer (VCM) plants – Case Study

    Vinyl chloride monomer (VCM), made from ethylene and chlorine by pyrolysis, is the feedstock for the production of the very common plastic material PVC. Modern VCM plants use integrated processes, combining endothermic and exothermic reactions in an almost energy balanced operation. Plants optimize the product quality, plant safety and cost efficiency by using advanced process control equipment ...

  • Pump Station call outs a thing of the past - Case Study

    It’s 2:00 AM and a telephone rings in Eckville, Alberta. Rick McKinnon checks the display on his cell phone and groans. It’s another high level call out alarm from one of the town’s new sewage lift stations. He knows before he drives there that the system will be running on floats instead of the new ultrasonic level controller. ...


    By Greyline Instruments Inc.

  • IPEX Guardian Double Containment Piping System ensures safe transport of untreated frac water at CAES facility - Case Study

    Ajoint venture between ACI Energy, Inc., an investment holding company, and Altela, Inc., a water desalination company, Clarion Altela Environmental Services (CAES) opened in November 2012 to recycle frac water * from the Marcellus and Utica Shale Basins, which stretch across much of Pennsylvania and Ohio. The CAES facility treats the frac water and ultimately turns it into clean distilled water ...


    By IPEX

  • Applications of Pipe Penetrating Radar for Advanced Pipe Condition Assessments: the Clark Regional Wastewater District (WA) Case Study

    Abstract Pipe Penetrating Radar (PPR) is the underground in-pipe application of GPR, a non-destructive testing method that can detect defects and cavities within and outside mainline diameter non-metallic (reinforced concrete, vitrified clay, PVC, HDPE, etc.) underground pipes. The key advantage of PPR is the unique ability to map pipe wall thickness and deterioration including voids outside ...


    By SewerVUE

  • Case study - Public-private partnership successfully tests leakwise early oil spill detection sensor in the tidal Delaware river

    Background In the summer of 2011, the Delaware River Basin Commission (DRBC) and the U.S. Geological Survey (USGS) collaborated with GE Analytical Instruments on a unique test deployment of an oil sheen sensor in the tidal Delaware River. The idea for the test deployment arose during meetings of the Delaware River and Bay Oil Spill Advisory Committee, which includes organizations and ...


    By GE Analytical Instruments

  • What to consider when selecting lighting connection and control products for schools & universities - Case Study

    The Government’s £4.4 billion Priority School Building Programme is well underway and by the end of 2021 a total of 537 schools will have been rebuilt or refurbished. When designing the lighting scheme for a new or refurbed school, there are many things to consider including time constraints, regulations, energy-efficiency and special client requirements. The development of new ...


    By Flex Connectors Ltd

  • TCE Source Area Remediation at a Former Manufacturing Facility Confidential Client – Western Connecticut - Case Study

    Project Summary TRS Group, Inc. (TRS), as a subcontractor to AECOM, completed a Standard Fixed Price Remediation (SFPR) of trichloroethene (TCE) in groundwater in Western Connecticut using Electrical Resistance Heating (ERH). The objective of the ERH project was to achieve the prescribed remediation goal for dissolved TCE in groundwater within the treatment volume. The system ...


    By TRS Group, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you