pyrolysis carbon Articles

  • Pyrolysis

    Introduction: Pyrolysis is formally defined as chemical decomposition induced in organic materials by heat in the absence of oxygen. In practice, it is not possible to achieve a completely oxygen-free atmosphere; actual pyrolytic systems are operated with less than stoichiometric quantities of oxygen. Because some oxygen will be present in any pyrolytic system, nominal oxidation will occur. If ...

  • closed pyrolysis and fast pyrolysis equipment

    Technokomplex manufactures and sells Pirotex closed pyrolysis equipment and auxiliary equipment that process by-products (pyrolysis carbon, liquid fuel) into commercial fractions. The equipment is becoming more relevant for mechanical rubber goods and plastics utilization field as besides hydrocarbon-containing products utilization mechanical rubber goods, plastics, oil sludge and waste oils ...


    By Technokomplex

  • Explosion/ Blast/ Accidents in Tyre Pyrolysis Plant in India.

    Lately, we are observing that their are number of blast in pyrolysis units. Why accidents/blast/explosions happens in Pyrolysis plant (batch process)?  Below are the reason- 1. Due to high pressure build up in the system. 2. Carbon Removal System 3. Leakage in the System 4. Human Errors (Improper Guidance ...


    By Divya International

  • Method of low temperature pyrolysis as an answer for PCBs utilization.

    When people buy new computers, TV-sets or trendy mobile phones they do not think much about the future of substituted models. In a consumer society where devices are changed due to their obsolescence rather than break down the problem of pollution by e-wastes becomes more relevant. Disposal of printed circuit ...


    By Technokomplex

  • High density polyethylene (HDPE) pyrolysis plant

    Thermal degradation of plastic polymers is becoming an increasingly important method for the conversion of plastic materials into valuable chemicals and oil products. In this work, virgin high-density polyethylene (HDPE) was chosen as a material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse virgin HDPE with an objective to optimize the liquid product yield at a ...

  • How to build waste plastic pyrolysis plant

    Preparation of raw material: The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details: Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should ...


  • The analysis of steel wires from scrap tires pyrolysis

    From waste tire/tyres or plastic through pyrolyzing by tyre pyrolysis plant manufactured by RESEM in China what can be steel wire accout for13%, carbon black 35%, crude oil 45%.  Steel wire can be re-sale to steel factory, to re-assume it''s own value for us through treatment. Steel wire is one of the four varieties which are steel''s plates, tubes, type, silk. It is also ...

  • The analysis of steel wires from scrap tires pyrolysis

    From waste tire/tyres or plastic through pyrolyzing by tyre pyrolysis plant manufactured byRESEM in China what can be steel wire accout for13%, carbon black 35%, crude oil 45%.  Steel wire can be re-sale to steel factory, to re-assume it''s own value for us through ...


  • Waste tire pyrolysis plant with detail introduction

    Pyrolysis plant: With the global warming and usage of tire and rubber products, it has become unstoppable trend to recycle these solid wastes and convert them into fuel oil in pyrolysis way which adopts green environment friendly technology. Huayin company began to research waste tire pyrolysis plant since 1993. Now we did it, we invented the waste tyre recycling machinery to ...


  • Pyrolysis processing of used old tyres by thermal plasma technology

    Thermal plasma pyrolysis of used old tyres was studied in a nitrogen plasma reactor in order to evaluate the material and energy recycling potential. The main gaseous products from thermal plasma pyrolysis of used old tyres were identified by chromatography as H2, CO, CH4, C2H2, ...


    By Inderscience Publishers

  • High efficiency waste tyre to oil pyrolysis plant, xinxiang huayin

    Company Profile: Waste tyre to oil  pyrolysis plant use the pyrolysis technology which is a recycling technique converting rubber or tyre waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. Huayin renewable energy equipment company has been leading China oil pyrolysis plant field since 1993. Huayin company offers a wide range of ...


  • Turnkey Manufacturer & Supplier of Large scale Waste Plastic & Tire Pyrolysis Plant Machinery

    We establish large scale pyrolysis plants on turnkey basis. The total turnkey supply includes of machinery designing & simulation, equipment manufacturing, supply, installation, commissioning, technology transfer and operational training. We are one of the prominent leaders in establishing pyrolysis plants on turnkey basis.   Advantages of pyrolysis plants manufactured & ...

  • Negative differential resistance in carbon–silica nanocomposites

    In this work, carbon–silica nanocomposites have been elaborated by sol–gel technique. SiO2 nanoparticles were mixed with resorcinol–formaldehyde (RF) carbon precursor solution with RF/SiO2 mass ratio being 1. The samples were dried by increasing temperature from ambient to 150°C by step 10°C/day and then pyrolysis at several temperatures ...


    By Inderscience Publishers

  • Synthesis and characterisation of electrical conducting nanoporous carbon structures based on pyrogallol-formaldehyde

    Electrical conducting carbon (ECC) nanoporous structures were explored by changing the pyrolysis temperature of organic xerogel compounds prepared by sol-gel method from pyrogallol-formaldehyde (PF) mixture in water using picric acid as catalyst. The effect of these preparation parameters on the structural and electrical properties of the obtained ECCs was studied. The obtained results revealed ...


    By Inderscience Publishers

  • Paper fibers as a carbon source for the de novo formation of polychlorinated dioxins and furans

    The formation of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs) from carbon that was produced by the pyrolysis of paper fibers and from wood charcoal was investigated experimentally. Fibers obtained from filter paper were pyrolyzed at 300° and 800°C to produce low- and high-temperature carbon samples. The two types of carbon and wood charcoal were mixed with silica ...


    By Springer

  • Paper fibers as a carbon source for the de novo formation of polychlorinated dioxins and furans

    Abstract  The formation of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/Fs) from carbon that was produced by the pyrolysis of paper fibers and from wood charcoal was investigated experimentally. Fibers obtained from filter paper were pyrolyzed at 300° and 800°C to produce low- and high-temperature carbon samples. The two types of carbon and wood charcoal were ...


  • Growth of nano–wrinkles on photoresist–derived carbon microelectrode array

    A novel fabrication method for integrating nano–wrinkles to carbon microelectromechanical systems (C–MEMS) posts on a silicon substrate is proposed in this paper. In the fabrication of carbon microelectrode array, SU–8, a negative photoresist is patterned by photolithography and subsequently pyrolysed at high temperatures in an oxygen–free environment. In this process, the SU–8 posts are slowly ...


    By Inderscience Publishers

  • Partial carbonized nanoporous resin for uptake of lead from aqueous solution

    Four partial carbonized nanoporous resins (PCNRs), based on organic xerogel compounds, were synthesised by the sol–gel method from pyrogallol and formaldehyde mixtures in water using picric acid as catalyst. The PCNRs were prepared at different pyrolysis temperatures: T1 = 200 °C (PF-200), T2 = 300 °C (PF-300), T3 = 400 °C ...


    By IWA Publishing

  • Influence of poly(bisphenol A carbonate) and poly(ethylene terephthalate) on poly(vinyl chloride) dehydrochlorination

    Abstract  Recycling of poly(vinyl chloride) (PVC) waste is a serious problem because of its high chlorine content. Dehydrochlorination of PVC-containing polymer waste produces solid residue char, for which conversion to pyrolysis oil in a petrochemical plant seems to be an attractive way of recycling PVC waste. Unfortunately, some polymer admixtures react with HCl and cause formation of ...


  • Producing carbon sorbents at solid-fuel CHPS as an element in environmental protection strategies for power engineering

    Prospects are considered for the general use of carbon sorbents for treating water in power engineering, and a demonstration is given of the desirability of making them in a specialised part of the production cycle at CHPS.Keywords: Carbon sorbents, thermal coal processing pyrolysis unit, semicoke, solid-fuel power plant, brown coal semicoke ASBC (ABM), FBCC (BKM), ACBC (ABD), activation, ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you