pyrolysis process Articles

  • Pyrolysis

    Introduction: Pyrolysis is formally defined as chemical decomposition induced in organic materials by heat in the absence of oxygen. In practice, it is not possible to achieve a completely oxygen-free atmosphere; actual pyrolytic systems are operated with less than stoichiometric quantities of oxygen. Because some oxygen will be present in any pyrolytic system, nominal oxidation will occur. If ...

  • closed pyrolysis and fast pyrolysis equipment

    Technokomplex manufactures and sells Pirotex closed pyrolysis equipment and auxiliary equipment that process by-products (pyrolysis carbon, liquid fuel) into commercial fractions. The equipment is becoming more relevant for mechanical rubber goods and plastics utilization field as besides hydrocarbon-containing products utilization mechanical rubber goods, plastics, oil sludge and waste oils ...


    By Technokomplex

  • Pyrolysis processing of used old tyres by thermal plasma technology

    Thermal plasma pyrolysis of used old tyres was studied in a nitrogen plasma reactor in order to evaluate the material and energy recycling potential. The main gaseous products from thermal plasma pyrolysis of used old tyres were identified by chromatography as H2, CO, CH4, C2H2, ...


    By Inderscience Publishers

  • Process for the Separation of Gas Products from Waste Tire Pyrolysis

    In recent years, pyrolysis has proven to be an effective thermochemical process for the recycling of waste tires. After pyrolysis, three fractions are obtained:  carbonaceous solids, liquid hydrocarbons, and the so-called noncondensable gases. In this paper, the starting point is the pyrolysis reactor outlet that provides a gas stream with a temperature of 600 ...


    By RESEM Group

  • Tyre Pyrolysis Oil Distillation plant, Tyre Pyrolysis Oil Distillation Unit

    Tyre Pyrolysis Oil Distillation Plant Tyre Pyrolysis Oil Distillation Plant Introduction Reduce pressure distillation new technology , is the new technology are developed as per the characters of tyre oil , plastic oil which refine from waste tyre ,plastic.This new ...

  • Replacement of Methylene Chloride Based Paint Stripping Process with Pyrolysis Process: Intrepid Industries

     Intrepid Industries Pty Ltd replaced a methylene chloride based paint stripping process with a pyrolysis process. Significant benefits were realised in the environmental and occupational health and safety areas. Background Intrepid Industries Pty Ltd is principally a powder coating operation, specialising in coating outdoor furniture and lattice work made from die cast ...


  • Tailored nanostructures for microgassensors by flame spray pyrolysis

    Integration of nanoparticle synthesis and deposition in micro-machining processes is a mandatory step toward development of nanodevices. Indeed, large scale production of tailored particles is achievable in aerosol reactors. Direct deposition from the aerosol leads to formation of nanostructured layers avoiding the cumbersome steps of wet-methods. Nevertheless, improvement of nanoparticle ...


    By Inderscience Publishers

  • The production of biofuels and renewable chemicals by fast pyrolysis of biomass

    Bio-energy can provide more renewable energy requirements than any other technology. This paper focuses on fast pyrolysis as the only thermal process that directly delivers a high yield of liquid. This can be used on site or transported to centralised facilities for utilisation. This offers the potential for optimisation, greater economies of scale and exploitation of bio-refineries. The overall ...


    By Inderscience Publishers

  • Explosion/ Blast/ Accidents in Tyre Pyrolysis Plant in India.

    Lately, we are observing that their are number of blast in pyrolysis units. Why accidents/blast/explosions happens in Pyrolysis plant (batch process)?  Below are the reason- 1. Due to high pressure build up in the system. 2. Carbon Removal System 3. Leakage in the System 4. Human Errors (Improper Guidance ...


    By Divya International

  • On the thermal oxidation stability of pyrolysis biomass oil

    The rice husk-based biomass-oil is composed of complex organic compounds and water, and its oxidation stability has a direct influence on its physico-chemical property and application. The advanced oxidation experiments were carried out through the flowing of air and oxygen respectively. The influences of four factors, including gas flux, oxidation time, temperature and copper foil, on the ...


    By Inderscience Publishers

  • Method of low temperature pyrolysis as an answer for PCBs utilization.

    When people buy new computers, TV-sets or trendy mobile phones they do not think much about the future of substituted models. In a consumer society where devices are changed due to their obsolescence rather than break down the problem of pollution by e-wastes becomes more relevant. Disposal of printed circuit ...


    By Technokomplex

  • Waste plastic pyrolysis plant with high profits

    Pyrolysis Plant: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Kinetics of the low-temperature pyrolysis of walnut shell

    The walnut shell with particle size less than 0.154 mm pyrolysis mass loss behaviour was studied at different heating rates (5, 10, 20, 30, 40?C/min) using pyris1 thermogravimetric analysis (TGA) instrument. Results showed that the activation energies of walnut shell pyrolysis under the different fractions decomposed were centred on 134?172 kJ/mol by Ozawa method and Kissinger?Akahira?Sunose ...


    By Inderscience Publishers

  • High density polyethylene (HDPE) pyrolysis plant

    Thermal degradation of plastic polymers is becoming an increasingly important method for the conversion of plastic materials into valuable chemicals and oil products. In this work, virgin high-density polyethylene (HDPE) was chosen as a material for pyrolysis. A simple pyrolysis reactor system has been used to pyrolyse virgin HDPE with an objective to optimize the liquid product yield at a ...

  • Characterization of char from slow pyrolysis of sewage sludge

    The effects of final pyrolysis temperature Tend from 300 ºC to 550 ºC, heating rates β of 2 ºC/min, 3 ºC/min and 5 ºC/min, retention time RT from 45 min to 90 min, and the moisture content MC from 0 to 70% on characteristics of the pyrolysis char from sewage sludge were investigated using a tube furnace in this study. The resulting chars were characterized by sorption of nitrogen (surface area ...


    By IWA Publishing

  • How to build waste plastic pyrolysis plant

    Preparation of raw material: The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details: Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should ...


  • A comparison of fast and slow pyrolysis liquids from mallee

    An exploratory comparative study of the fast and slow pyrolysis of eucalyptus mallee has been carried out to explore the differences in liquid yields and characteristics. The study focused on the liquid products, which were fully characterised and good mass balance closures were achieved. The influence of temperature and heating rates on the slow pyrolysis of eucalyptus mallee was investigated, ...


    By Inderscience Publishers

  • Waste tire pyrolysis plant with detail introduction

    Pyrolysis plant: With the global warming and usage of tire and rubber products, it has become unstoppable trend to recycle these solid wastes and convert them into fuel oil in pyrolysis way which adopts green environment friendly technology. Huayin company began to research waste tire pyrolysis plant since 1993. Now we did it, we invented the waste tyre recycling machinery to ...


  • The analysis of steel wires from scrap tires pyrolysis

    From waste tire/tyres or plastic through pyrolyzing by tyre pyrolysis plant manufactured by RESEM in China what can be steel wire accout for13%, carbon black 35%, crude oil 45%.  Steel wire can be re-sale to steel factory, to re-assume it''s own value for us through treatment. Steel wire is one of the four varieties which are steel''s plates, tubes, type, silk. It is also ...

  • The analysis of steel wires from scrap tires pyrolysis

    From waste tire/tyres or plastic through pyrolyzing by tyre pyrolysis plant manufactured byRESEM in China what can be steel wire accout for13%, carbon black 35%, crude oil 45%.  Steel wire can be re-sale to steel factory, to re-assume it''s own value for us through ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you