quarter-turn ball valve Articles

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Healthy Control Valves

    A simple maintenance routine can help ensure trouble-free valve operation. Whether the control valve in your system is the first one that has required maintenance or if you are experienced with maintaining multiple valves in your system, some simple guidelines can help keep them operating at optimal performance. Physically checking all valves at least every 12 weeks is important, assuming that ...


    By Singer Valve Inc.

  • Valve actuation and control in the modern refinery

    Introduction The Reliance refinery at Jamnagar in India is one of the largest single refinery sites in the world and virtually all of its valves are motorised with Rotork actuators. Almost 3000 Rotork IQ intelligent valve actuators were installed during the construction of the original refinery, tank farm and power station in the late 1990s, together with a Rotork Pakscan 2E two-wire ...


    By Rotork

  • Keeping Your Control Valves in Good Health

    Whether that brand new control valve in your system is the first one you have ever had to look after or if you are an old hand at valve maintenance with tens of valves in your system, there are a few simple guidelines and reminders for keeping it operating at optimal performance. It’s important to physically check valves at least every 12 weeks or so, assuming everything is running fine in ...


    By Singer Valve Inc.

  • Control valve actuators: their impact on control & variability

    New electric control valve actuators provide significant control and reduced variability benefits over compressed air actuators in a wide range of process applications, resulting in superior control performance, fewer maintenance problems and energy savings. In a process plant, the general function of a control valve is to restrict the opening of the valve so it affects the flow or pressure of ...


    By Rotork

  • Control valve actuators: Their Impact on control and variability

    Sector: Oil & gas Category: Electric actuators Products: CVA Electric control valve actuators provide excellent performance and are ideal for oil and gas wells in remote production fields. Instrument air supply systems are costly and require significant energy to run. If mains power isn't available, an instrument air supply isn't ...


    By Rotork

  • Top 8 things to check when maintaining a Pressure Reducing Valve

    Like every other piece of mechanical equipment we use, a control valve does require some maintenance. As budgets are stretched and time is tight, it can be tempting to ignore checking on valves that are often located in underground vaults and give years of operation without complaint, but eventually like everything else, they will fail. This article looks at 8 simple steps that if undertaken ...


    By Singer Valve Inc.

  • Don’t Let Your Control System Control You

    Regular maintenance ensures valves remain healthy. If your system is operating properly, you should physically inspect all valves at least every 12 weeks to check for tubing leaks and other abnormalities. Pressure gauges should be checked to ensure each valve is performing as designed. If you find something wrong, refer to the appropriate instruction manual, which may be available online. Because ...


    By Singer Valve Inc.

  • Top 5 Causes for AODD Pump Failure

    1.       Air Valve Stalling, Clogging or Leaking: Stalling of the air valve often has to do with the design of the airways inside the valve. If the design in less than optimal it will stall under certain conditions. Same can be said about leakage of air where the air mostly blows through the valve instead of being redirected to push the diaphragm. Clogging on the other hand ...


  • Glass blended rapidly with abrasion resistant rotary mixer

    While most reading this article may be unfamiliar with the Kopp Glass name, most are likely familiar with Kopp Glass products. From a humble beginning more than 80 years ago, as a manufacturer of red glass for railroad signals, Kopp now claims to be the world's leading producer of precision molded industrial quality technical glass.  The company is known worldwide among the ...

  • City Of Vancouver Deploys Free-Swimming Tools For Successful Inline Inspection Of Pressurized Main

    With its Pacific Ocean entranceway and towering backdrop of snow-dusted mountains, it’s no wonder the City of Vancouver ranks among the most laid-back, beautiful cities in Canada, and indeed, the world. Water is in its blood. This spring the coastal seaport city retained the services of ...


    By Pure Technologies

  • Condenser Tube Cleaning System Custom Design & Fabrication

    Dominion Power is one of United States’ largest producers and transporters of energy, with a portfolio of approximately 25,700 megawatts of generation and 6,500 miles of electric transmission lines. Dominion serves more than 5 million utility and retail energy customers in 14 states. ...


    By Innovas Technologies LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you