rdf waste plant Articles

  • RDF for cement kilns

    The use of the cement has significantly contributed to the worldwide economies. In fact cement is considered to be the second most consumed substance in our society and apparently the amount of it, used in construction, is more than double that of the total of all other building materials, including wood, steel, plastic and aluminium. Nowadays the cement industry has important environmental ...


    By SatrindTech Srl

  • Reconstruction RDF plant, location: northern Germany

    Task The use of alternative raw materials and combustibles has been considerably enlarged during the last few years and reaches an energy share of appr. 50%. The mix of the substances taken for the  production of energy has changed: The use of oil residues, fuller’s earth, meat and bone meal etc. has been reduced. Mainly there have been added fluff and pellets sorted out ...


  • UNTHA – specialists in RDF and SRF shredding

    Prevention of waste at source is obviously the preferable scenario, but for as long as households continue to fill their bins with rubbish, for as long as companies dismiss the duty they have to reduce the waste they produce, and for as long as countries continue to burn fossil fuels for energy, nations must look at smarter ways to utilise their waste. Companies involved in the engineering and ...


    By UNTHA Shredding Technology

  • Size reduction of substitute combustibles (RDF)

    The new pilot installation of SITA Wiebe GmbH, Bielefeld/Germany, processes highly calorific commercial and industrial waste to become quality-assured substitute combustibles for cement industry and/or power plants. Basic items of this ultra-modern processing installation are two one-shaft size reduction machines of type WLK 30 Super-Jumbo of WEIMA Maschinenbau GmbH, Ilsfeld. The total output of ...


  • Baling of RDF/SRF - Case Study

    Refuse Derived Fuel (RDF) and Solid Recovered Fuel (SRF) plants are common in Europe to meet the European demands for sustainable waste handling. RDF/SRF process facilities combined with the Flexus Balasystem round baling system is the best solution to efficiently store and transport the generated RDF/SRF. The material is compressed and wrapped into easily handled round bales, that can be stored ...


    By Flexus Balasystem AB

  • Conception of a Refuse-Derived Fuel (RDF) incineration plant and its environmental benefit

    Since landfill ban was realised in July 2009 in Germany, wastes that have a high and middle calorific value must be incinerated. Fossil fuels like oil and coal for the generation of electricity and/or heat can be substituted, so that approximately 4 million tons of CO2 could be avoided. Waste incineration is a possible partial solution for avoiding worst ...


    By Inderscience Publishers

  • Energy From MSW RDF Pelletization a Pilot Indian Plant

    The generation of Municipal Solid Waste (MSW) is expected to rise manifold in the coming decade due to the rapid urbanisation & growth in population. By setting up a pilot plant in Mumbai, India, an indigenous technological solution has been provided for producing fuel pellets from the combustible portion of MSW. The RDF pellets so produced are coal substitute with comparative advantages over the ...


  • RDF production at Delete Oy with UNTHA shredders

    UNTHA’s complete RDF system strengthens Delete’s waste to energy commitment When environmental services specialist Delete needed a new alternative fuel production system for its site in Tampere, central Finland, the €100million turnover company turned to Austrian-based UNTHA. Now manufacturing more than 20 tonnes of 80mm RDF an hour, ...


    By UNTHA Shredding Technology

  • Recycling MRF with RDF production – Katowice, Poland - case study

    Customer The Municipal Company of Waste Management Ltd in Katowice provides a framework of service activities such as: The collection and transport of waste Selective collection and utilization of waste Composting organic waste All year round road maintenance Automotive diagnostics Requirements The ...

  • First UK installation for UNTHA TR Series shredder at new HW Martin RDF facility

    When HW Martin required a state-of-the-art RDF facility, they chose OKLM to design and build the plant and the revolutionary new UNTHA TR Series shredder, supplied by Riverside Waste Machinery, to fulfil their high-performance shredding requirements. This is the first UK installation for UNTHA’s new TR Series shredding technology which was developed specifically for the processing ...


    By UNTHA UK LTD

  • Mixed waste composting trends

    It's been about 25 years since vendors started marketing systems to process mixed municipal solid waste via composting in the U.S. Today, there are 13 plants, most fulfilling their niche in the communities they serve - whether managing MSW in high tourism areas, or processing residual organics from materials recovery facilities. Table 1 provides summary data on the 13 facilities. While we did not ...


    By BioCycle Magazine

  • Study Charts a Future for Waste-Derived Fuels

    Pointers to possible future EU policy initiatives to give co-incineration facilities burning waste-derived fuels a strategic role in waste management have emerged in a study for the European Commission.1 The report suggests a policy focus on promoting source separation of municipal wastes, active discouragement of mass burn incinerators, and a levelling of the regulatory playing-field for ...

  • Converting waste into valuable resources with the Gasplasma process

    Abstract This paper reports on a novel process development to convert waste into renewable energy using gasification. Advanced Plasma Power (APP) has developed an advanced thermal conversion technology, (Gasplasma ), capable of treating a wide range of organic and inorganic wastes. In the two-stage thermal process, the fluidised bed gasifier (FBG) converts the waste to a crude syngas ...


    By Advanced Plasma Power (APP)

  • Polish CEMEX cement plant relies on WEIMA - Case Study

    In the eastern Polish town of Chelm, not far from the Ukrainian border, the waste recycling company EkoPaliwa recently successfully commissioned their new plant for the production of alternative fuels. Two WEIMA PowerLine 3000 single-shaft shredders with a powerful hydraulic drive used in secondary shredding absolutely take center stage here. The main buyer of the produced Refuse Derived Fuel ...


    By WEIMA

  • Hungarian city makes giant leap into recycling with an advanced sorting plant - Case Study

    Settlements in the southeast region of Hungary, which previously sent all their municipal solid waste (MSW) to landfill, now have a state-of-the-art MSW sorting system near Békéscsaba that can process up to 120,000 tonnes of waste per year. The ...


    By TOMRA Sorting (TITECH)

  • Sorting and Recycling Municipal Solid Waste (MSW) in Xiamen City, China - Case Study

    TOMRA Sorting Recycling is playing a pivotal role in the implementation of automatic sorting at the MSW plant in Xiamen Background The city of Xiamen, renowned for its natural beauty, is located on China's southeast coast, in Fujian Province. Its famous seascape and clean natural environment are a magnet for tourists, and the city government wants to keep things ...


    By TOMRA Sorting (TITECH)

  • Mexico’s first commercial waste to energy facility to supply alternative fuel under agreement

    Mexico’s first Waste to Energy plant is up and running in Hermosillo, Sonora. The facility began to take shape two years ago, when total waste management specialist ...


    By UNTHA Shredding Technology

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • UNTHA optimises WtE production and metal recycling at Turkish paper mill

    An UNTHA shredder is now fully operational in Turkey’s first solid waste incineration plant. The single step XR3000C has transformed Modern Enerji’s approach to metal recycling, at the same time as boosting the production of ...


    By UNTHA Shredding Technology

  • Kiverco Completes Another Complex Project for a Major UK Customer

    The customer Tom White Waste Ltd was formed in 1981, when Tom White found it difficult to obtain waste management services for his other businesses and decided to start his own waste management operation. Since then, the business has grown hugely and in 1988, Tom’s sons Ian and Paul joined the business and today, they run the company as joint managing directors. Tom White ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you