real-time analytical instrument Articles

  • Real Time Measurments of Acetylene in Ethylene Manufacturing Process

    Keywords Tunable Diode Laser, Wavelength Modulation Spectroscopy, Analyzer, Acetylene, Ethylene, Acetylene Converter Abstract The analyzer, based on near infrared Tunable Diode Laser Absorption Spectroscopy (TDLAS), was developed for the measurement of acetylene in process streams. Measurements of acetylene were made as under laboratory conditions and in ...

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • DHL analytical - Case Study

    Quantum Leap in productivity According to John Dupont, General Manager of Operations, “DHL Analytical, Inc. has been on the leading edge of laboratory innovation for many years. Our vision was to move towards a paperless laboratory, with the realization that the current generation of electronic documents can be produced at almost all points in our process. The trick for us ...


    By Poplar Solutions, LLC

  • Locus and Overhoff to Offer Real Time Tritium Monitoring and Compliance Software at Nuclear Facilities

    Locus Technologies (Locus), the industry leader in web-based environmental compliance and information management software, and Overhoff Technology Corporation, the world's leader in the design and manufacture of Tritium monitors and radiation monitoring systems, have partnered to offer a complete Tritium monitoring solution for the nuclear industry using Overhoff's Tritium instrumentation and ...


    By Technical Associates

  • Mohawk Laboratories has acquired Strathtox providing greatly improved `real-time` studies

    Mohawk Laboratories, the research and development arm of NCH Corporation, has acquired Strathkelvin’s latest respirometer, StrathtoxTM, resulting in greatly improved ‘real-time’ bioremediation potential efficacy studies for its BioAmp system. This allows NCH to provide quick study results to its customers and potential customers in determining whether or not the bacteria ...

  • Natural Gas: Complete Analytical Solution

    Chromatotec® has developed in its Research & Development laboratories, a new instrument for hydrocarbon (C1-C6+) measurements and calorific values as well as WOBBE index computation. This analyzer is based on chromatography principle using a Thermal Conductivity Detector (TCD). The sample will be separated into the column and quantified by the detector. A difference of thermal ...


    By Chromatotec Group

  • Determining analytes in food, soil and sludge

    Customer: Institute of Sustainable Halophyte Utilization, Pakistan The Institute of Sustainable Halophyte Utilization, University of Karachi has been established as an elaborate facility for research of various halophytes to serve as a source of fodder, forage, biofuel, oil seeds, medicinal plants and other possible usages. Application: Determining analytes in food, soil ...


    By BÜCHI Labortechnik AG

  • Latest analytical technology ensures biogas efficiency

    Anaerobic Digestion (AD) relies on the ability of specific micro-organisms to convert organic material into a gas that can be used to generate electricity. However, these bacteria require specific conditions if they are to function effectively and instrumentation specialist company HACH LANGE has developed a range of online, portable and laboratory instruments that have enabled a large number of ...


  • Understanding Oil-in-Water Instrument Specifications

    The measurement capabilities of oil-in-water analysis methods are described by several analytical figures-of-merit. Examples are: Range (Linear and Dynamic) Limit of Detection (LOD) Limit of Quantification (LOQ) Precision (Repeatability and Reproducibility) Sensitivity Accuracy Response Time Some or all of these are often specified by customers in the bid packages issued when selecting a ...

  • Analytical Support for Cost-Effective Pollution Control

    ' Analytical tools have been developed by the World Bank Group to estimate rapidly the extent and impacts of pollution in a given situation and to support decisions on pollution management. These tools help decision makers to overcome the frequent lack of data on emissions from different sources, their impact on ambient quality, and mitigation alternatives.' Decision Support System for ...


    By The World Bank

  • Tekran instruments—monitoring around the world

    Tekran provides trace-level mercury analytical and monitoring technology for a variety of applications including laboratory-based sample analysis, continuous point-source emissions and ambient air monitoring. This article focuses on and highlights the results of an application of Tekran’s Ambient Air Mercury Speciation System. In contrast to most other heavy metals, mercury (Hg) and mercury ...

  • Tech update: Plant instrumentation - food engineering

    Sensors and other devices are the foot soldiers in automation architecture, but most food and beverage manufacturers still are looking for full value. You know an equipment category has arrived when it starts getting its own industry-specific center. For the food production sensors that do the heavy lifting in instrumentation technology, that day could arrive earlier rather than ...


    By Hardy Process Solutions

  • New TOC sensor wins Gold IBO award for portable instrument design

    In 2006, the USEPA singled out the distribution system as the most vulnerable component of a utility’s drinking water system. In response, many waterworks are taking a closer look at how they may protect the public’s drinking water. One option is to place online water quality panels throughout the distribution system to detect a change in the baseline water quality. The cost of implementing a ...


    By GE Analytical Instruments

  • Assessing Accuracy of a New Portable Olfactometer, Scentroid SM100 for Measuring Ambient Odours-A Comparative Analytical Study of SM100 and Traditional Olfactometry Techniques

    Abstract: This paper evaluates the accuracy of the newly introduced ultra-portable olfactometer, Scentroid SM100 developed by IDES Canada Inc, with two techniques traditionally used for assessing ambient odours: Nasal Ranger instrument and a lung technique with the dynamic olfactometry laboratory analysis of collected samples. A similar study was presented at the recent NOSE 2012 odour conference ...

  • Who says materials analysis can’t be fun? Oxford Instruments brings “smart science” to the “smart phone”

    Everyone who works or studies in the world of materials and elemental analysis agrees on two guiding principles: Accuracy of analysis is vital and speed of analysis is critical where time equals money. Oxford Instruments’ new “Materials Analysis eXpert” App just released for smartphone and tablet ticks both boxes, delivering an easy-to-use app combining a handy periodic table ...


    By Oxford Instruments plc

  • Time is of the essence in plastics

    Introduction Determining the moisture content in plastics is an important step in the extrusion and molding process of many industrial resins.  Excessive moisture content can lead to microscopic steam pockets that can blister or weaken the integrity of the molded product.  Plastic pellets in a saturated or ‘wet’ state can also mislead buyers of bulk plastic since ...


    By Arizona Instrument LLC

  • Exoscan FTIR instrument system can easily be used in the lab or taken to the field for routine analysis.

    Infrared spectroscopy has long been recognized as a selective and sensitive technique for analysis and characterization of surfaces. From material identification to quantitative analysis, infrared analyses can establish if a surface is composed of the correct material, has the proper coating thickness, is free of contaminants, is properly cured, or has the correct properties for the next step in ...


  • Texas Instruments - A Novel Separation Technique for the Analysis of Trace Levels of Atmospheric Contaminants in Inert Semiconductor Process Gases

    A NOVEL SEPARATION TECHNIQUE FOR THE ANALYSIS OF TRACELEVELS OF ATMOSPHERIC CONTAMINANTS IN INERTSEMICONDUCTOR PROCESS GASES J. Scott McWilliams, Alan Johnson, Charlene Long, Jeremiah D. Hogan*Texas Instruments, Inc.Dallas, TX 75265 Low ppb detection limits for contamination in cylinder gases have been achieved with gas chromatography using a modified gas ...


    By Environics, Inc.

  • Time resolved liquid scintillation counting: (TR-LSC™) for environmental 3h analysis

    Environmental analysis of many naturally occurring and man-made, beta emitting radionuclides, including 3H, 14C, 90Sr/90Y, 241Pu, and 234Th is a significant analytical challenge due to the extremely low activity levels encountered. Under these circumstances, reducing instrument background is essential for improving analytical sensitivity. Time-Resolved Liquid Scintillation Counting (TR-LSC), a ...


    By PerkinElmer, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you