real-time analyzer Articles

  • The Detection of Nonconformances in Real Time

    Introduction Many businesses now use systems that work in real time for acquiring, storing, analyzing and issuing data in all their plants in an efficient manner. These real time archiving systems enable you to obtain data with the aid of sensors and electronic control panels directly and quickly. These real-time acquisition systems store crucial data on operations carried out within the company ...


    By Xybion Corporation

  • AquaLab Analyzer provides real-time phosphorus measurement in Everglades

    When it comes to ecosystem sustainability, Florida is no backwater. The South Florida Water Management District, which includes the unique Everglades habitat, had a major challenge. The EPA and various governmental authorities have defined limits for many water quality parameters to support a water body’s designated use. Any physical, chemical or biological condition that threatens the designated ...

  • Real-Time Control Optimizes Extended Aeration Processes

    The population of Hillsborough County, Florida has doubled since the Valrico advanced wastewater treatment plant (AWTP) was built in 1990 to treat the sewage of several small communities west of the City of Tampa. When it began operation, the Valrico AWTP capacity was only 4 MGD; small when compared to Tampa's 96 MGD Howard F. Curren AWTP located not far to the east. But Valrico serves as a very ...

  • Real Time Measurments of Acetylene in Ethylene Manufacturing Process

    Keywords Tunable Diode Laser, Wavelength Modulation Spectroscopy, Analyzer, Acetylene, Ethylene, Acetylene Converter Abstract The analyzer, based on near infrared Tunable Diode Laser Absorption Spectroscopy (TDLAS), was developed for the measurement of acetylene in process streams. Measurements of acetylene were made as under laboratory conditions and in ...

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • BLOOM – Real-Time Monitoring Brief - Case Study

    PeCOD® is a patented technology that can determine COD by measuring photocurrent charges originating from oxidation of the organic contaminants present in a water sample. Three PeCOD® analyzer units were implemented at three different facilities, representative of key food and beverage sub-sectors–a winery, a bakery and a brewery–to undertake “real-time” ...


    By MANTECH

  • Empowering safety programs with real-time data visualization

    An ongoing reality for safety managers and frontline personnel in almost any industry is the need to record safety incident data. When all incident data is inputted into a centralized database, a safety coordinator doesn’t have to wait for the completion of monthly safety reports to identify trends and weaknesses within an organization’s safety program. Rather, since a robust incident ...


    By Intelex Technologies Inc.

  • Safety Leadership Spotlight | Using Leading Indicators to Drive Organizational Safety Performance

    On January 18th, I sat down with EHSQ Community member, and Principal, Larry Coco, of ESH & Quality Consulting, to hear his thoughts on how leading indicators are transforming workplace safety in business. Over the last 30 years, Larry has managed ESHQ teams in the commercial nuclear industry with Westinghouse and on operations contractor teams at Department of Energy weapons production ...


    By Intelex Technologies Inc.

  • What is Chemical Oxygen Demand (COD)?

    Chemical Oxygen Demand (COD) analysis is a measurement of the oxygen-depletion capacity of a water sample contaminated with organic waste matter. Specifically, it measures the equivalent amount of oxygen required to chemically oxidize organic compounds in water. Why Measure COD? COD is used as a general indicator of water quality and is an integral part of all water quality ...


    By MANTECH

  • Industrial applications – Air analysis in clean air room - Case study

    Context & Challenges To ensure people’s safety and a good repeatability of industrial process, the analysis of ambient air is crucial. Especially, electronic boards are produced in clean air room by complex lithographic process using very reactive chemicals. The nature and concentration of volatile compounds can be different depending on the chemical process and can also vary ...


    By Chromatotec Group

  • FORMA: A Near-Real Time Alert System for Tropical Forest Loss

    If you were the administrator of a protected forest, you would ideally have a staff of rangers on patrol, backed up by law enforcement and high-resolution satellite images to keep you up-to-date on the forest’s condition. In this ideal world, illegal activity would quickly be halted. Yet the reality is that many protected areas lack these resources. ...

  • Quantitative real-time PCR does not reliably detect single fecal indicator bacteria in drinking water

    The microbial quality of drinking and environmental water is usually determined by culture-based detection of fecal indicator bacteria according to ISO reference methods 16649-1 and 7899-2, respectively. Because of an increasing demand for rapid, culture-independent methods, we tested three quantitative polymerase chain reaction (qPCR) approaches for the simultaneous detection of both, ...


    By IWA Publishing

  • Evaluation of a near-real time NEXRAD DSP product in evolution of heavy rain events on the Upper Guadalupe River Basin, Texas

    This study evaluates the Next Generation Weather Radar (NEXRAD) Digital Storm-Total Precipitation product (DSP) by analyzing 30 rain events on the Upper Guadalupe River Basin, Texas, from September 2006 to May 2007. The DSP product provides relatively accurate information on the evolution of rain events at high spatial and temporal resolutions in near-real time. This is particularly important ...


    By IWA Publishing

  • Locus and Overhoff to Offer Real Time Tritium Monitoring and Compliance Software at Nuclear Facilities

    Locus Technologies (Locus), the industry leader in web-based environmental compliance and information management software, and Overhoff Technology Corporation, the world's leader in the design and manufacture of Tritium monitors and radiation monitoring systems, have partnered to offer a complete Tritium monitoring solution for the nuclear industry using Overhoff's Tritium instrumentation and ...


    By Technical Associates

  • Performance of solid-state sensors for continuous, real-time measurement of soil CO2 concentrations

    Recent advances in sensor technology provide a robust capability for continuous measurement of soil gases. The performance of solid-state CO2 sensors (Model GMM220 series, Vaisala, Inc., Helsinki, Finland) was evaluated in laboratory, greenhouse, and irrigated winter wheat (Triticum aestivum L.). In ambient CO2 concentration, the GMM222 sensor averaged 427 ± 8.3 µL L–1. Under variable CO2 ...

  • A Calgary Wastewater Treatment Plant Finds Real-Time Information on Effluent Quality Critical to Achieving Consistent Performance in Biological Nutrient Removal

    In 1994, the Bonnybrook Wastewater Treatment Plant in Calgary, Alta., completed the first phase of an upgrade to biological nutrient removal (BNR) after several years of testing. Bonnybrook was not the first treatment plant to upgrade bioreactors for nutrient removal: Other communities had struggled with the technology. Bonnybrook operators determined that real-time information on final effluent ...

  • The spectral absorption coefficient at 254 nm as a real-time early warning proxy for detecting faecal pollution events at alpine karst water resources

    Because spring water quality from alpine karst aquifers can change very rapidly during event situations, water abstraction management has to be performed in near real-time. Four summer events (2005–2008) at alpine karst springs were investigated in detail in order to evaluate the spectral absorption coefficient at 254 nm (SAC254) as a real-time early warning proxy for faecal pollution. For the ...


    By IWA Publishing

  • Forklift Emissions Analyzers

    Forklifts are commonly used in warehouses of various size and capacity for the movement and shipping of goods; however, the unoptimized engines can produce excess quantities of silent and deadly CO gas that can risk the health and safety of the workers. When forklifts are brought in for service usually the CO gas isn't measured. If the CO gas isn't measured and the engine properly optimized then ...

  • Hydrogen Chloride Analyzer (HCl, H2O)

    LGR's Hydrogen Chloride Analyzer (HCl, H2O) provides sensitive measurements of HCl in ambient air or in industrial process flows (e.g., coal and cement exhaust streams) with extremely high precision and sensitivity. No longer do you have to spend a lot of money or wait a long time to measure HCl with extremely high sensitivity – LGR's HCl Analyzer provides measurements every second with ...

  • Sulfur Compounds Analyzer MEXA-1170SX

    The MEXA-1170SX is a continuous gas analyzer for sulfur compounds existing in engine emissions. It can measure SO2 concentration and the amount of total reduced sulfur compounds (TRS), such as H2S, separately. It can also measure the total sulfur compounds (TS) that contains both gaseous compounds and liquid compounds in PM, such as SO3. By utilizing ultra-violet fluorescence (UVF) method and ...


    By HORIBA Europe GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you