real-time density meter Articles

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Continuously mixing one batch at a time

    Ready-mix company improves mixing efficiency and ingredient accuracy by switching to a rotary batch mixer. When a concrete and ready-mix producer moved to a new plant, the mixing process was redesigned to include batching for greater control over the final product 's ingredients. Rich-Mix Products makes concrete and ready-mix products and packages them for sale in home ...

  • World famous watch manufacturer chooses Bramidan as time matters - Case Study

    Swiss leader watch designer and manufacturer TISSOT has taken advantage of the new expansion of its premises to invest in a fully automatic Bramidan channel baler to optimize waste handling procedures. For many years, Tissot had been using a 20m3 waste compactor to handle all types of waste fragments. Once full, the compactor used to be sent to an incinerator located 10 km away from the factory. ...


    By Bramidan Balers

  • REDmeters - Blue Paper

    REDmeters: Abstract The process of controlling and the cost of monitoring slurries in many industries are normally accomplished using various continuous mass flow systems. These types of systems usually contain a magnetic flow meter and a line density meter. There is inherent cost associated to these systems due to the inaccurate nature of these meters. Some meters on the market boast up to ...


    By REDmeters

  • Monitor Dredging Slurry Flow from Outside the Pipe

    Dredging Equipment Manufacturers Choose Non-Contacting Greyline Flow Meters The Challenge Thousands of dredges are operated to maintain navigation channels in our rivers, lakes and harbours and to mine sand and gravel for the construction industry. Managing and optimizing production from a dredge requires continuous monitoring of pipeline pressure, vacuum ...


    By Greyline Instruments Inc.

  • Northeast US a smart energy testing ground

    By Elisa Wood August 19, 2010   Ben Franklin’s saying, “Out of adversity comes opportunity” seems to characterize the energy sector in US Northeast. Electricity rates are among the nation’s highest. Population density leaves scant room for new power plants and transmission lines.  And the region has little indigenous generation fuel. So ...

  • A simple numerical method for snowmelt simulation based on the equation of heat energy

    This paper presents one-dimensional numerical model for snowmelt/accumulation simulations, based on the equation of heat energy. It is assumed that the snow column is homogeneous at the current time step; however, its characteristics such as snow density and thermal conductivity are treated as functions of time. The equation of heat energy for snow column is solved using the implicit finite ...


    By IWA Publishing

  • Portable IR analyzers: the ideal measurement solution for biofuels blend quality and wastewater testing

    Two challenges facing the biofuels industry involve compliance with blend quality standards and wastewater regulations. According to a study done by the National Renewable Energy Laboratory, 1 the chief problem found with biodiesel blends was inaccurate blend ratios. Retail customers and fleet managers do not typically worry about whether the blend ratio is correct until a problem occurs. For ...


    By Spectro Scientific

  • Tuning Your Boiler for EPA Boiler MACT Compliance

    The EPA’s Boiler MACT regulations are heating up. Boiler MACT is an EPA rule to limit hazardous air pollutants (HAP) from commercial and industrial boilers and process heaters. Originally proposed in 2011 as a mandate driven by the Clean Air Act,  the rules are Area Source Boiler MACT 40 CFR 63, subpart JJJJJJ for smaller boilers (stores, hotels, apartments, ...


    By Sierra Instruments, Inc.

  • Rotary batch mixer yields high-quality blends for powder metallurgy

    GKN Sinter Metals Inc. is the world's largest manufacturer of parts made by powder metallurgy, a molding process that produces complex shapes with a range of properties. Powder metallurgy offers benefits in part fabrication over competing metal processes. It is faster than forging or casting and permits the use of more performance-enhancing alloys than die-casting. GKN Sinter Metals, Auburn ...

  • Why Our Buildings Should Be Made From Wood

    If done correctly, using wood for buildings would have a number of environmental benefits without loss of biodiversity or carbon storage capacity. Although it may seem counterintuitive, it would be better if we built buildings from wood than from concrete, brick, aluminium and steel. We use millions of tons of these modern materials every year. They have many ...


    By Ensia

  • Green Roofs are Growing

    Standards from ASTM International Committee E60 on Sustainability guide work on vegetative green roofs. Walking south along Michigan Ave. from the Chicago River, a first-time visitor might take in the green vistas of Millenium Park sprawling eastward toward the great lake with no hint that the park itself is a green roof. It covers ...


    By ASTM International

  • Beginners Guide to Spectroscopy - Transmission

    This is the first part of our introduction to Spectroscopy, more can be found on our blog (http://specac.blogspot.co.uk). Introduction Transmission spectroscopy is the oldest and simplest technique for analysing samples in infrared. This ...


    By Specac Limited

  • Pro-X Nutraceuticals, a Roex company, triples mixing capacity, reduces labor and waste

    A former athlete and body builder named Rod Burreson searched for non-pharmaceutical supplements to enhance his physical condition, but none met his quality requirements, prompting him to develop and personally test his own formulations. Based on the health benefits he experienced, Burreson started a company in 1994 called Roex, Inc., that used contract manufacturers and packagers to ...

  • Impact lead the way in paper and glass separation

    Impact Air Systems was recently contacted by one of the UK's leading recycling led waste management companies to help them improve the process following the recent introduction of domestic glass into the material stream. The company involved have requested to remain anonymous, but currently operate 6 large scale operations in the UK.   We were called to their facility in the West ...


    By Impact Air Systems

  • Remote controlled `Pit Hog™` dredge removing sludge from aeration lagoons at Los Alisos, California, Waste Water Treatment Plant

    The Los Alisos Water District Water Reclamation Plant is removing raw sewage solids, decayed algae and microorganisms, and algae-laden sludge from its aeration lagoons using a Liquid Waste Technology (LWT) remote controlled lagoon dredging system. The tertiary wastewater treatment plant treats four million gallons per day. Officials of the Lake Forest, California facility initiated the buildup ...

  • A look at top-quality wood briquettes - Case Study

    The wood experts at Reuss are very happy with their RUF briquetting equipment Nowadays, wood briquettes are a popular source of fuel - but only as long as the quality is good. The people at Reuss are well aware of this fact from their long experience in the wood business, so their briquettes are made only from dry wood shavings using high-quality briquetting equipment from Ruf GmbH & ...

  • Roll-press briquetting helps Iowa lime producer retain previously wasted fines as valuable product case study

    Adding a new 550 tpd rotary kiln more than doubled lime production capacity at Linwood Mining and Minerals Corporation's Buffalo Plant, located near Davenport, IA...but it also raised the problem of what to do with a greatly increased output of fines. Realizing that landfilling its plant property with waste fines at rates of up to 100 tpd would not be a good long-term solution, the company not ...


    By K.R. Komarek Inc

  • Oil Processing Upgrading via Cavitation Technology

    Ultrasonic vortex generators AVS-100   Cavitation technology application   Cavitational effect is accompanied by microexplosions, ultrasound and also by mechanical cuts and encounters from exposure of the hundred of cuts pairs which are moved towards each other with the high linear speed. The value of ...


    By GlobeCore GmbH

  • Batch blenders make modern mortars in China

    With no internal moving parts, blenders minimize abrasive wear and simplify cleaning at two SureBlock plants. In 1997, US-based SureBlock entered a joint venture with China's Tianjin People's Building Material Products Factory to make concrete masonry units (CMUs). Commonly known as concrete blocks, CMUs come in many shapes, sizes, and colors. They are mainly used to erect structural walls, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you