refined hydrocarbons monitor Articles

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Interpretation of total petroleum hydrocarbon (TPH) results with RaPID assay kits

    SUMMARY The SDI RaPID Assays for petroleum hydrocarbon fuels (Total BTEX, PAHs) have been shown to provide excellent correlation with GC based (8015M) and IR based (418.1) methodologies for testing Total Petroleum Hydrocarbons (TPH). Linear relationships between immunoassay and TPH results with both gasoline and diesel fuels are demonstrated. Fuel reactivities with immunoassay are shown to ...


  • Engineered wetland removes subsurface hydrocarbons while providing beneficial reuse

    British Petroleum (BP) is operating an engineered wetland to treat petroleum-contaminated groundwater at a 300-acre site in Casper, WY. Release of petroleum products during refinery operations from 1908 until 1991 resulted in significant petroleum hydrocarbon contamination. Over 44,000 yd3 of LNAPL were removed by dual-phase recovery wells and oil/water separators constructed in 1981, but ...

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • New oil spill response application note from China

    The Problem: Oil may spill out in the process of oil exploration & development, refining, storage and transportation and enter into open water environment like oceanic environment due to incident or incorrect operation. Oil spill damages include to human heath, safety, ecological environment, aquaculture. In China, the State Oceanic Administration requires the oil content in the discharge to ...

  • LNAPL remediation using electrical resistance heating

    Abstract An Electrical Resistance Heating (ERH) pilot test was conducted in the fall of 1998 to determine the effectiveness of using ERH in combination with soil vapor extraction (SVE) for the remediation of benzene and light nonaqueous-phase liquids (LNAPL) at an island location on a river in the Midwest. Hydrocarbon-stained soils were discovered on an island in Ohio in May 1993 during the ...


    By TRS Group, Inc.

  • Case study - Performance testing PAHs in soil

    These case studies highlight Sitelab’s accuracy from customers who have used the UVF-3100D for testing Target PAHs. This test correlates well to U.S. EPA Method 8270 or similar GC methods, which includes a list of 16 or more compounds. The analyzer is fitted with special optical filters sensitive to this same group of hydrocarbons. Examples of UVF-3100D testing Polycyclic Aromatic ...


    By Sitelab Corporation

  • Field Demonstration of a Permeable Bioreactive Barrier for Leachate Control.

    ABSTRACT: A biostimulation technique was selected for a pilot study to treat groundwater at a former New Jersey municipal landfill. The process will address a mixture of chlorinated compounds (e.g. vinyl chloride and chlorobenzene), hydrocarbons (e.g. benzene and methyl ethyl ketone) and heavy metals. The reactive barrier will be constructed using a series of injection points to implace a slurry ...


    By REGENESIS

  • Achieving exemplary compliance case study

    Challenge: A major integrated oil company retained the services of Antea Group to manage environmental liability at a bulk storage and distribution facility that supplies gasoline, diesel fuel and other refined petroleum product to Minnesota, Iowa and Wisconsin.  The property presented a series of unique challenges including multiple LNAPL plumes, ...


    By Antea Group - USA

  • Oil and Gas Development - Onshore Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • 1700 miles of the keystone Xl Pipeline: A state, federal and international regulatory concern

    Regulatory compliance at the state and federal level grows infinitely more complex when the laws and regulations of six U.S. states, U.S. federal regulations, and the Canadian regulatory regime are intertwined.  TransCanada’s proposed Keystone XL Pipeline, currently awaiting approval from the U.S.  Department of State, is gaining as much attention for its regulatory ...

  • Triad expedites brownfields redevelopment in Fairbanks

    The Fairbanks North Star Borough (FNSB) used Triad in 2006-2007 to assess environmental conditions at a municipal property along the Chena River in Fairbanks, AK. FNSB accelerated the site investigation as part of a brownfields assessment grant received from the U.S. EPA in 2005. Low-level contamination had been identified onsite in past investigations, but its extent and impact on future ...

  • Integrated solar and wind energy powers oil recovery system

    Recovery of free-product petroleum at the former St. Croix Alumina (SCA) site in Kingshill on St. Croix, VI, is addressing ground-water contamination caused by past releases of fuel and refined petroleum at SCA. The oil recovery system employs wind-driven turbine compressors (WTCs), wind-driven electric generators (WEGs), and photovoltaic (PV) panels to power pneumatic and electric submersible ...

  • Leveraging Standards in the Energy Resurgence

    An Interview with Fred Walas, P.E., Fuels Technology Manager, Marathon Petroleum Company Marathon Petroleum’s Fred Walas talks about today’s energy developments, sustainability at his company’s refineries and the crucial role of standards in fuel production and quality control. As the energy spectrum shifts in the United States, forms of resource extraction and ...


    By ASTM International

  • EPA Technology News & Trends - Tacoma “Well 12A” Superfund Site

    The U.S. EPA Region 10 office uses an adaptive site management approach that relies on high-resolution site characterization (HRSC) techniques for strategic sampling at the Well 12A project area. This approximate one-square-mile project area is one of three at the 2.5-square-mile Commencement Bay-South Tacoma Channel Superfund site in Tacoma, Washington. The vicinity of Well 12A, one of 13 wells ...


    By TRS Group, Inc.

  • Advances in flashpoint testing: economic impact

    Flashpoint testing is one of the oldest methods of the ASTM D02 Committee on Petroleum Products and Lubricants, which was formed in 1904. The most prevalent standards are ASTM D56 (Tag Method), D92 (Cleveland Method), and D93 (Pensky-Martens Method). These classical techniques, commonly referred to as open-cup and closedcup methods, share a common principle: A test flame is lowered into the ...

  • Re-agent dosing - Sodimate installs standardised equipment to meet the specifications of each plant case study

    Water quality refining is the most essential step in water treatment processes. When done properly, it guarantees palatable taste characteristics suitable for drinking water. The reliability and accuracy of the processes for storing, metering, and dissolving the required re-agents are indispensible for successfully completing this final treatment. Outlined below is a case story about Viry- ...


    By Sodimate, Inc

  • Spolchemie site remediation and NanoRem field site application

    Site Remediation The Spolchemie site was chosen as one of the NanoRem case study sites, to test two types of nanoparticles (NPs) (zerovalent iron - nZVI and iron oxide NPs) for in situ remediation of BTEX (Benzene, Toluene, Ethylbenzene, and Xylenes) contamination. Nanoremediation was seen as an opportunity to enhance the in situ biodegradation of the BTEX contaminants and to reduce the ...


    By NANO IRON s.r.o.

  • Comparative Risk Assessment

    ' Comparative risk assessment provides a systematic way to compare environmental problems that pose different types and degrees of health risk. It combines information on the inherent hazards of pollutants, exposure levels and population characteristics to predict the resulting health effects. Using data from available sources, rapid, inexpensive comparative risk assessments can identify the most ...


    By The World Bank

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you