refuse-derived fuel shredder Articles

  • Refuse Derived Fuel, Current Practice and Perspectives

    Untitled Document Summary I OBJECTIVES The objectives of the project were to undertake a survey on the current ...

  • One TANA Shark replaces two machines in the efuse-derived fuel (RDF) business - Case Study

    For Attero Recycling Ltd. operating in the alternative fuels sector, TANA Shark is the only shredder on the market that can produce the required particle size for solid recovered fuel (SRF) in a single pass. After the purchase, Attero was able to cut the number of machines in half and increase output, saving time and money. ...


    By Tana Oy

  • KAB - Polaris 2800 - Polaris Single-Shaft Shredder from Lindner optimizes the one-step processing of refuse-derived fuel - Case Study

    The Polaris 2200 and 2800 are two new single-shaft shredders from Lindner that have been optimized for the cost-efficient, single-step shredding of untreated household refuse as well as industrial and commercial waste. A typical application area is the processing of refuse-derived fuel (RDF) that is used instead of fossil fuels in calciners of cement factories or in thermal power plants. Because ...


    By Lindner-Recyclingtech GmbH

  • Tire Derived Fuel (TDF)

    Tire derived fuel (TDF) is a fuel derived from waste tires of all kinds. TDF is a major use for scrap or waste ...

  • Study Charts a Future for Waste-Derived Fuels

    Pointers to possible future EU policy initiatives to give co-incineration facilities burning waste-derived fuels a strategic role in waste management have emerged in a study for the European Commission.1 The report suggests a policy focus on promoting source separation of municipal wastes, active discouragement of mass burn incinerators, and a levelling of the regulatory playing-field for ...

  • Tire Shredders: An Introduction

    How Does a Tire Shredding Machine Work? Tire shredding is a very common way of preparing scrap tires for disposal or recycle. In order to dispose of tires in a landfill, they must be shredded to various sized chips. The size required depends on the state or area you live in. Tire shredding is also used for recycling tires; crumb tire or tire mulch can be reused to create surfaces on ...


    By ECO Green Equipment

  • The Scavenger: getting more out of shredder fractions

    Driven by the goal of enabling complete separation of shredder light fraction into streams with their own singular characteristics, work at Belgium-based recycling technology specialist AD REM has culminated in the launch of its latest piece of equipment - the Scavenger. This new development is also designed to process shredder heavy fraction eddy current drops. The initial objective when ...


    By AD REM N.V. (Valtech Group)

  • Harden Superb Performance Scrap Tire Shredder

    Harden scrap tire shredder can be applied in a variety of Tire Types A large number of scrap tires are produced from various kind of vehicles and equipment every year. Harden scrap tire shredder can be applied in a variety of tire types like passenger car tires, semi truck tires, small aeroplane tires, agricultural equipment tires, etc.. ...

  • UNTHA XR shredder boosts capacity of German SRF specialist

    One of the most experienced alternative fuel producers in Germany – Lober GmbH & Co. Abfallentsorgungs KG – has invested in the UNTHA XR3000C waste shredder to optimize its SRF plant. For three generations, Lober has successfully handled the waste disposal for municipalities and ...

  • UNTHA waste shredder for one of most state-of-the-art MPS systems in Europe

    MPS Betriebsführungs GmbH, based in Berlin, has been using a UNTHA XR3000R waste shredder since early October. The waste treatment plant, which is jointly operated by the ALBA Group and Berliner Stadtreinigung (Berlin’s municipal waste management company), specialises in the production of alternative fuels, and forms part of one of the most modern plants for mechanical-physical ...

  • Transformations of syngas derived from landfilled wastes using the Gasplasma process

    Abstract The Gasplasma advanced conversion technology is able to efficiently produce a clean syngas and an environmentally stable vitrified product from historically landfilled materials. The syngas is rich in hydrogen and carbon monoxide and possesses high calorific value, and low residual tar levels. While this syngas has traditionally been considered only as a fuel source for power ...


    By Advanced Plasma Power (APP)

  • Mexico’s first commercial waste to energy facility to supply alternative fuel under agreement

    Mexico’s first Waste to Energy plant is up and running in Hermosillo, Sonora. The facility began to take shape two years ago, when total waste management specialist ...

  • End-of-life Tires as an Alternative Fuel (TDF) in Cement Kilns: Now Easier than Ever!

    End-of-life tires are a challenging type of waste since they are difficult to shred and are expensive to treat and get rid of. However, tire derived fuel TDF is an extremely good alternative to the traditional fuels used in cement kilns, like oil, coal, and petroleum coke. The following blog presents a solution and explains how TDF can be used for heating cement kilns. ...


    By Tana Oy

  • First UK installation for UNTHA TR Series shredder at new HW Martin RDF facility

    When HW Martin required a state-of-the-art RDF facility, they chose OKLM to design and build the plant and the revolutionary new UNTHA TR Series shredder, supplied by Riverside Waste Machinery, to fulfil their high-performance shredding requirements. This is the first UK installation for UNTHA’s new TR Series shredding technology which was developed specifically for the processing ...


    By UNTHA UK LTD

  • UNTHA optimises WtE production and metal recycling at Turkish paper mill

    An UNTHA shredder is now fully operational in Turkey’s first solid waste incineration plant. The single step XR3000C has transformed Modern Enerji’s approach to metal recycling, at the same time as boosting the production of ...

  • TR Series captures Irish market

    In the past year, we were able to achieve a prominent position on the Irish waste market: Following tough negotiations and numerous visits to reference sites, we could convince an Irish waste management company of our technology. The company put a post-shredder of the TR series into operation. Before that, our new customer operated a commercial-waste treatment plant with two shredders of a ...

  • What is RDF?

    "Refuse Derived Fuel" comes from Refuse Derived Fuel, literally: fuel from garbage. All kinds of garbage sorted, broken, eddy current in addition to aluminum, magnetic separation of iron, and then broken, wind selection, compression and drying processes made of solid form (cylindrical bar) fuel, referred to as RDF. RDF calorific value is 14595-20016 kJ / kg, much higher than coal (about 10870 kJ ...

  • Quality means money in shredding C&D and Industrial waste for RDF production

    A typical challenge in turning Construction and Demolition waste (C&D) and Industrial waste into high grade Refuse-Derived Fuel (RDF) is that elastic and stringy materials wrap around the rotor of the shredder. This causes hours of maintenance downtime weekly and has immediate effect on productivity. When using TANA Shark this has not been an issue for our customer Ekokem-TSJ Yrityspalvelut ...


    By Tana Oy

  • Shredding tires is a prosperous business

    Is your yard filled with piles of end-of-life tires? And are you wondering what to do with them? Many recycling companies and landfill sites are struggling with used tires. Tires are among the largest and most problematic sources of waste, since because of their shape and large volume they take up a lot of valuable space. However, tires are also one of the most reusable types of waste ...


    By Tana Oy

  • Key things to know about what TANA can do for your business

    (Pictured) New TANA Shark 440EM electric shredder offers unique versatility with zero emissions. Our customers operate in countless different areas of the waste management industry. They treat a wide range of waste types and streams using a variety of processes. Our job is to help them do that as ...


    By Tana Oy

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you