regenerative thermal oxidation Articles

  • Regenerative Thermal Oxidizer + Zeolite Wheel for VOC Emissions Abatement - Case Study

    Case Study: “Heceygo Project” Ehaust Air Treatment Regenerative Thermal Oxidizer For Voc Emissions Treatment ZEOLITE ROTOR-CONCENTRATOR + REGENERATIVE THERMAL OXIDIZER The Technical Solution For Large Air Flows With Low Solvent Concentrations PROJECT MAIN DATA: ...


    By Tecam Group

  • Regenerative thermal oxidizer - three canister RTO for tank car loading and unloading terminal

    Epcon is proud to share its case study for the Tank Truck Loading Terminal. The Problem Loading and Unloading Tank Trucks: When the Tank Trucks are unloaded, it causes a lot of vapor to be released to atmosphere. These emissions have to be controlled and can not be released to atmosphere. The Process Generally speaking, with ...


    By Epcon Industrial Systems, LP

  • For VOC emissions treatment: Regenerative Thermal Oxidizer + Zeolite rotor-concentrator - Case Study

    Case Study: “Heceygo Project” EXHAUST AIR TREATMENT REGENERATIVE THERMAL OXIDIZER FOR VOC EMISSIONS TREATMENT ZEOLITE ROTOR-CONCENTRATOR + REGENERATIVE THERMAL OXIDIZER  The Technical Solution For Large Air Flows With Low Solvent Concentrations   PROJECT MAIN DATA: CUSTOMER NAME: Heceygo PROJECT SIZE: ...


    By Tecam Group

  • Thermal oxidizers for natural gas savings - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. Good news for the country and our environment. The ...

  • QUADRANT SR Thermal Oxidizer & the chemical industry - Case study

    Chemical processing facilities across the country are facing ever tightening restrictions for volatile organic compound (VOC) and hazardous air pollutant (HAP) emissions. These emissions can be generated from such points as process vents, storage tanks, fugitive releases, among others…. To achieve compliance with Clean Air Act Amendments, facilities may have to apply maximum achievable ...

  • Automotive manufacturer chooses the QUADRANT SR Thermal Oxidizer - Case Study

    The worlds largest automotive manufacturer recently installed our QUADRANT SR-Series Thermal Oxidizer for use at destroying CO and VOC emissions from their engine test cell facility. The test facility houses several engine, transmission, and chassis dynamometer’s. The manufacturer demanded a system that would provide the highest uptime reliability and highest performance. The QUADRANT ...

  • Alliance Oxidizer Advantages

    The Alliance Corporations Oxidizer product line has a lot of design advantages compared with standard Regenerative Thermal Oxidizers. - Proven 2- and 3 bed Regenerative Thermal Oxidizer Design - 99% plus VOC Destruction Efficiency - Up to 97% Thermal Efficiency - Up to 30% fuel savings with proven natural gas injection - Low NOx burner operation - In-house design, ...


    By Alliance Corporation

  • Selecting VOC Oxidizer

    Nacah Tech's President, Bob Keibler presents How to select the proper type of thermal oxidizer or process gas treatment method.  The paper presents details on what parameters of a process gas to be treated determine which treatment method / oxidizer provides the best efficiency, plant flexibility, heat recovery method, etc. while maintaining the target emission rates. Begining ...


    By Nacah Tech LLC

  • Air Pollution Control Using Catalytic, Regenerative or Recuperative Systems

    For companies in a variety of industries, the clock is ticking regarding their compliance with local, state and federal clean air requirements. The need to provide adequate emission controls still looms on the horizon as these companies explore the various equipment and technology options available to them. While the guidelines regarding air pollution control are consistent by industry, a ...


    By The CMM Group, LLC

  • Medical implant manufacturer succeeds with the QUADRANT SRS Silicone Series Thermal OXidizer - Case study

    Medical Implant Manufacturer Succeeds with Customized Air Pollution Control Equipment Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right ...

  • Heat/Web offset printer uses the TRITON Series Thermal Oxidizer - Case study

    A heat-set/web offset printer recently installed a TRITON-Regenerative Thermal Oxidizer from Catalytic Products International, Inc. The TRITON system was contracted on a turnkey basis, in which CPI engineered and installed; the ductwork system from all dryers, foundation work, electrical integration, and rigged the oxidizer. The project was installed on time and without any added costs. The ...

  • Case study - Oxidizer system optimization

    OXIDIZER SERVICE SERIES: PART 4 As promised, this is the fourth installment of Anguil's Oxidizer Service Series. If you have read through the first three parts, this can be seen as a capstone of those efforts. Having a strong oxidizer service plan, backed up with recommended spare parts and all of the proper documentation will not only improve your system performance but also allow you to focus ...

  • Thermal deoilers - Thermal deoiling replaces liquid based degreasing

    The Problem A major Automotive company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company had ...


    By Epcon Industrial Systems, LP

  • Thermal deoilers - Thermal deoiling of evaporator coils for air conditioners

    The Problem A major Air Conditioning company was mandated to have an alternate technology for degreasing evaporator fins. They had, until recently, been deoiling metal parts in a conveyorized solvent based vapor degreasing line, but the state environmental agency mandated that the line be shut down on a certain date due to the excessive water and air pollution it generated. The company ...


    By Epcon Industrial Systems, LP

  • Nitrous oxide (laughing gas) - Case Study

    Example: Uranium enrichment Similar tasks: Nitric acid caprolactam production When uranium ore is converted into uranium hexafluoride (UF6) for uranium enrichment employing the diffusion process, or also when producing nitric acid and nitrogenous fertilizers for farming, laughing gas is produced by several undesirable side reactions. Thermal decomposition ...

  • How to Optimize Oxidation Systems for Efficient Operation

    Emphasis on air management within converting-process dryers and ovens is critical to the design of pollution-control systems for treating exhausts containing VOCs (volatile organic compounds). Efficient air management allows the pollution-control system to be optimally sized to meet the needs of the process. Good process control further defines the emission stream by avoiding the need for large ...


    By Babcock & Wilcox MEGTEC LLC

  • Oxidizer Media Replacement Restores Performance for Containers-Manufacture

    Operating Issue A manufacturer of metal containers encountered major operating problems with their Eisenmann 40,000 SCFM Regenerative Thermal Oxidizer (RTO) that hindered their production performance and caused major concern regarding an upcoming air compliance test. The overall pressure drop across the system was high and the pressure imbalances negatively impacted their process ...


    By Pollution Systems

  • Case study - Styrene emissions: Catalytic oxidizer with concentrator

    Overview The world's largest button manufacturer needed a pollution control system that would destroy styrene emissions from a variety of plant processes. The plant was proactively seeking a cost-effective air pollution control solution to preempt future regulatory action. The main concern of the customer was the high operating cost of an emission control system. ...

  • Case study - Increasing oxidizer capacity by 80,000 SCFM

    Overview A recreational products company bought a three year-old manufacturing facility with an existing regenerative thermal oxidizer (RTO) for the production of their outboard engine. They required emission control equipment to manage the volatile organic compounds (VOCs) emitted by the solvents used in the engine painting processes. The company wanted to minimize overall costs by using ...

  • Feed Manufacturer Installs High Efficiency Recuperative Oxidizer Due to Production Increase

    Operating Issue A global animal feed researcher and producer increased their capacity at their Midwest facility, thus requiring air pollution control technology that addressed their new process. Pollution Systems was sought to provide equipment to effectively reduce odors in 40,000 SCFM of VOC-laden process air, generated by the production of animal supplements. Additional objectives, ...


    By Pollution Systems

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you