relative humidity sensor Articles

  • Determination of the relative and absolute humidity in Compost piles by differential pectroscopy using Tuneable diode lasers

    The composting of biological waste is an important step towards the establishment of closed cycles of matter. A constantly high quality of the compost is, however, of utmost importance for the deliberate re-introduction of compost into the environment. The quality of the compost produced is determined by a very complex biological process during which the organic wastes are converted with the aid ...


    By ORBIT e.V.

  • ´More Stations. More Data. Better Forecasts.´ – the NYS Mesonet

    “More Stations. More Data. Better Forecasts.” – that’s the slogan of New York State Mesonet. The weather observation network consists of a total of 125 weather stations all over the state of New York and Lufft was selected as one of the vendors to support them in capturing the data. All 125 of the weathers stations have the standard instrumentation suite. Of those 125, 17 ...

  • Performance characteristics of a Thin-film aluminum oxide humidity sensor - Case Study

    Summary A laboratory study was made of the performance of a miniature-size, thin-film aluminum oxide humidily sensor over a range of ambient temperatures from 0°C to 40°C and encompassing humidities from 40 to 78,000 parts per million by volume (ppm-v). Hysteresis and temperature effects of the sensors were obtained from tests performed at ambient temperatures 40°C, 25°C and ...

  • 5 Reasons to Use WiFi Temperature/Humidity Monitoring

    Low-Cost Wireless Data Loggers Protect Your Inventory As wireless monitoring and alarming is becoming even more widespread and affordable, many supply and cold chain companies are turning to WiFi-capable devices to monitor their inventories for temperature and humidity. Now CAS DataLoggers can help you save on costs and time ...


    By CAS DATALOGGERS

  • PetroSense hydrocarbon sensors and their applications

    The increasing concern about hydrocarbon contamination of process water and produced water has created an increasing need for in-situ, real time, and accurate low cost instrumentation that can provide rapid detection and easily usable in the field. PetroSense sensors [1,2] represents “best in breed” technology for the detection of total petroleum hydrocarbons (TPH). PetroSense sensors ...


    By PetroSense, Inc

  • Colour Measurement as a Tool for Monitoring Oil Quality

    This paper takes a look at the many factors known to have a direct or indirect impact on the quality of oil and the diverse range of different measurement devices have been developed for this purpose, such as relative humidity and absolute water content indicators, particle calculators, dielectric sensors, oxidisation indicators (TAN value), viscosity meters and colour analysers. It explains ...


    By Kytola Instruments Oy

  • Helplessly exposed to nature? How lightning storms can be measured

    Each day, there occur about 1,000 thunderstorms with 4-10 million lightning bolts worldwide. In average, 700 people per year are hit by such light discharges, of which 75% of the hits result in long-term damages. Between three and seven cases end fatal. The risk is particularly high in the open field and is fortunately decreasing. The reason for this is that we stay more often inside in cars and ...

  • Nanostructured oxyspinel multilayers for novel high-efficient conversion and control

    Multilayered temperature-/humidity-sensitive thick-film p - i - p + structures based on spinel-type semiconducting ceramics of different chemical composition (Cu 0.1 Ni 0.1 Co 1.6 Mn 1.2 O 4 with p + -type of electrical conductivity and Cu 0.1 Ni 0.8 Co ...


    By Inderscience Publishers

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • Future inside – smart environmental sensing technology

    SHM30 snow depth sensor in Antarctica (photo: Alfred-Wegener-Institut, Helmholtz-Zentrum Bremerhaven) A lot of sensing technologies have changed recently: Ultrasonic wind measurement replaces cups and vane systems, closed anemometer designs offer better protection from ...

  • Great Lakes need great Data Buoys

    One recently finished project was performed by the University of Wisconsin and has comprised the depolyment of two data buoys which are both furnished with a multifunctional Lufft WS501-UMB. These weather ...

  • The Fatal Flaw in Dew Point Measurement for Injection Molding

    Dew-point measurement is a common and important metric in the plastic drying process. A good dew point meter can tell you whether your dryer is working normally or if it’s in need of repair. Dew point meters do this by measuring the humidity in the air that flows through the dryer. What dew point meters won’t tell you anything about, however, is how much moisture is actually present ...


    By Arizona Instrument LLC

  • Advanced offshore measurements to support wind energy production, weather forecasting, and emergency response

    Sonoma Technology, Inc. (STI), with support from the Bureau of Ocean Energy Management, is leading a unique partnership of corporate, government, and university researchers to develop a marine environmental observations program in the Gulf of Mexico. The primary goal of this project is to develop a framework of advanced offshore measurements to support emergency response, oil and gas exploration ...

  • Projected leaf area and flow rate - options and observed effects on gas exchange measurements with CIRAS-2

    From a practical and theoretical standpoint, the objective in using gas exchange technology is to capture representative plant/soil physiological data, holding instrument error to a minimum. A basic goal in this is to ensure that sampling reflects real responses to natural or imposed environmental variability (treatments). Whether from an observational or experimental approach, the physiological ...


    By PP Systems

  • Moisture in Oils: The Three-Headed Beast

    Abstract Moisture contamination in in-service lube oils is perhaps one of the most destructive forms of engine corrosion second only to particle contamination.  Water contamination in oil can be categorized into three forms of water; Free, emulsified, and dissolved.  All forms of water have direct consequences to the oil and gears of the engine, but indirect consequences as ...


    By Arizona Instrument LLC

  • Multi-Stage Air Quality Monitoring in the Workplace

    CAS DataLoggers recently supplied the environmental datalogging solution for a factory with a small series of office rooms experiencing serious air quality issues. Employees reported headaches during the work day, indicating a possible lack of adequate ventilation. These workspaces were located next to the busy factory floor which caused an incidental ...


    By CAS DATALOGGERS

  • The challenges and benefits of local air quality monitoring

    A new generation of air quality monitors is now being offered to provide localised, real-time air quality readings – but the potential benefit is only just starting to be realised. It is generally accepted that whilst measurements from air quality reference stations are highly accurate, they are not sufficiently location-specific. Key pollutants – such as NO2 and PM2.5 ...


    By AQMesh

  • Monitoring and Recording Soil Moisture Using Wireless Data Collection

    Wireless Voltage Data Logger Records in Real-Time CAS DataLoggers recently provided the low cost wireless solution for a government organization undertaking an environmental project for recording and remotely monitoring the moisture content of peat moss soil. The data would be used in support of developing climate prediction ...


    By CAS DATALOGGERS

  • Japanese Organics Recycling Association Formed

    Another backyard composting adage states that compost should have the feel of a wrung-out sponge — damp but not dripping wet. Actually, a wrung-out sponge may be on the dry side for composting, but the analogy does provide a great image for understanding the reasons for balancing moisture. Like a compost pile (or windrow or material in a vessel), a sponge is a solid mass containing an enormous ...


    By BioCycle Magazine

  • AQMesh: a new option for flexible air quality monitoring

    AQMesh has an impressive collection of global users and performance results measuring ambient air quality in applications ranging from traffic planning and urban hotspots to industrial fence line monitoring, building ventilation management, or environmental lobbying. This pole-mounted unit comes with an independent power supply and communications, so offering the possibility of measuring air ...


    By AQMesh

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you