reverse osmosis metal oxide fouling Articles

  • Control of metal oxide fouling in reverse osmosis

    High levels of iron and manganese, along with large quantities of dissolved gases in the wells created concern for the viability of a conventional desalination design for the proposed City of Camarillo groundwater desalination facility. To identify viable pre-treatment process(es) for the control of metal oxide fouling in reverse osmosis, a 12-month pilot study was undertaken. The pilot study ...


    By Toray Chemical Korea

  • Control of metal oxide fouling in reverse osmosis

    High levels of iron and manganese, along with large quantities of dissolved gases in the wells created concern for the viability of a conventional desalination design for the proposed City of Camarillo groundwater desalination facility. To identify viable pre-treatment process(es) for the control of metal oxide fouling in reverse osmosis, a 12-month pilot study was undertaken. The pilot study ...


    By Toray Chemical Korea

  • Fouling and cleaning of seawater reverse osmosis membranes in Kalpakkam nuclear desalination plant

    A seawater reverse osmosis plant of 1800 m³/day capacity is part of the 6300 ³/day capacity nuclear desalination demonstration project at Kalpakkam. The plant was commissioned in October 2002 and is in continuous operation. This paper deals with types of foulants, membrane cleaning procedures and the improvement in the reverse osmosis system after cleaning. This paper also describes the analysis ...


    By Inderscience Publishers

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Results from 99 seawater ro membrane autopsies

    Abstract This paper presents results from 99 sea water reverse osmosis (SWRO) membrane autopsies carried out by the Genesys laboratory in Madrid from 2002 and outlines the technical issues surrounding fouling and scaling of sea water membranes. The authors discuss historical results of membrane autopsies and link recent trends and changes in plant design to potential fouling and ...

  • Particle removal efficiency of Nano alumina fiber filters

    A 2 nanometer alumina fiber is combined with a microglass fiber to produce a nonwoven filter. Its pore size is 2 microns, yet it is functionally rated at 0.03 microns. Data are presented showing dirt holding capacity and filtration efficiency for particles from 0.001 to 7 microns. The filters have high retention for micron size silica dust, bacteria, virus, DNA/RNA, tannin and latex spheres. ...


    By Argonide Corporation

  • Methods of Water Purification

    This article is excerpted from 'Pure Water Handbook' published by Osmonics®, Inc. of Minnetonka, Minnesota USA and is printed with permission of Osmonics, Inc. Water treatment can be defined as any procedure or method used to alter the chemical composition or natural 'behavior' of a water supply. Water supplies are classified as either surface water or groundwater. The majority of public or ...

  • Genairclean RO membrane cleaning - Case Study

    Trial Period September 2013 to May 2014 Site Water Reuse system, UK Background A Brackish Water Reverse Osmosis (BWRO) system with a history of rapid and consistent membrane fouling was selected to trial the new ‘Genairclean’ micro-bubble multi-mechanism RO membrane cleaning method. The plant reclaims process ...

  • Crossflow Membrane Filtration High-Purity Water Systems

    INTRODUCTION As the electronics industry continues to provide us with such products as high resolution television, notebook size portable computers and cars with automatic navigation systems, it becomes necessary to produce semiconductors with finer device geometries to allow for efficient placement of more circuits per a given area. This requires increased control of a semiconductor's material ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you