rinse water tank control system Articles

  • The case for water jet tank cleaning

    To maintain a consistently high level of product quality, today's processing plants must ensure that their tanks and reactors are thoroughly cleaned on a regular basis. The direct expenses involved can be substantial, and adding indirect costs {e.g., downtime and compliance with safety and environmental regulations) puts extreme pressure on tight operations budgets. To meet this challenge, more ...


    By NLB Corp.

  • Water recovery system reduces soft drink manufacturers water waste by 35%

    The filtration and water treatment specialist Puresep provide leading soft drinks manufacturer with a state of the art system to reduce their water usage Puresep were contacted to look at ways the soft drinks manufacturer could reduce the amount of rinse water sent to drain – in order to help them achieve their water reduction targets Following an onsite review of the current rinse ...


    By Water Active Ltd

  • Modular treatment system neutralizes process water

    A self-contained pH control and monitoring sys- tem for ready mixed operations yields clean water for recycling or permitted discharge to the environment. Fortrans' Model 5000S uses car- bon dioxide gas to neutralize high-pH process water, offering precise alkalinity monitoring and control of water in pits, settling basins and other containment areas, as it lowers total suspended solids. Designed ...


    By Fortrans, Inc.

  • Ph and total solids control for concrete producers

    Fortrans Inc. manufactures a self-contained pH control and monitoring system that uses CO2 gas to neutralize high pH process water and lower total suspended solids in process water produced at ready mixed concrete plants. The Model 5000S pH Control and Monitoring System offers precise pH control, monitoring of pH and lowers “Total Suspended Solids” of process water contained in pits, ...


    By Fortrans, Inc.

  • Methods of Water Purification

    This article is excerpted from 'Pure Water Handbook' published by Osmonics®, Inc. of Minnetonka, Minnesota USA and is printed with permission of Osmonics, Inc. Water treatment can be defined as any procedure or method used to alter the chemical composition or natural 'behavior' of a water supply. Water supplies are classified as either surface water or groundwater. The majority of public or ...

  • Ion Exchange Systems.

    When properly applied, ion exchange for concentrated ion recovery is by far the best available technology. Where effluent streams can be filtered and ions requiring different regenerants can be segregated, ion exchange is usually the most cost effective and least capital intensive solution. We provide 4 levels of integration to cover most applications and capital budgets. The variations in the ...


  • Blairlinnans WTW, Scottish Water, 91 MLD

    The Client Scottish Water is the UK's fourth largest water utility. They are responsible for the whole of Scotland and islands around the Scottish coast, including the major cities of Glasgow, Edinburgh and Aberdeen. The Client's Needs Scottish Water required a new water treatment works in the Glasgow area to meet revised water quality standards, particularly ...


  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Project profile - uranium treatment system Middletown Springs Elementary School Vermont

    Background The Middletown Springs Elementary School in Vermont is located in an area of the U.S. very susceptible to the formation of naturally-occurring uranium. Due to the high levels of uranium detected in the well water serving the School, it was placed on a “Do-not-Drink Advisory”. AdEdge was contacted by Otter Creek Engineering in June 2009 to assist the School in ...

  • 16 Oxiperm Pro disinfection systems with flushing capacity for Messe München

    The exhibition organisers need to provide different amounts of domestic water for different kinds of exhibitors. For example, an IT industry exhibition needs a different amount of water to a watersports exhibition. This means that the domestic water pipes need to be designed on basis of the shows which need largest volumes of drinking water. With all sorts of different occupants in the Munich ...


  • Efficient Operation of Lighting, Hot Water and Air Conditioning: Hotel Inter Continental Sydney

    To improve its environmental performance and save nearly $300,000 per year, the Hotel Inter Continental Sydney changed some practices that seemed insignificant in themselves but which collectively, wasted massive resources. The changes cost around $275,000 and no adverse affect on guest amenity. They included lowering the power of lights that were too bright, lowering the temperature of ...


  • Wyman Gordon Case Study

    Wyman-Gordon is a world class materials company with nearly 200 years of metals engineering experience. They are the acknowledged leader in the production of high-quality closed-die forgings and extrusions for the most critical applications. Markets served include those for commercial and military aircraft; gas turbine engines; oil and gas exploration; land based gas turbine and power generation; ...


    By Mech-Chem Associates, Inc.

  • Arrowbear Park, California - Case Study

    In July 2010, AdEdge Water Technologies, LLC was contacted by Engineering Resources to design, manufacture and install a uranium water treatment system for the community of Arrowbear Park County Water District in the San Bernardino National Forest. The community water system has a raw water uranium concentration of 118 parts per billion well above the EPA maximum contaminant level of 30 parts per ...

  • Wastewater Metals Removal

    Industrial Wastewater Treatment Success Stories Wastewater Treatment Metals Removal Ton Nerve Gas Agent Container Rinse Waters ...


    By Integrated Engineers Inc.

  • Phosphate Pre-Treatment of Steel: Always Powder Coating

     Always Powder Coating have replaced the conventional iron phosphate pre-treatment system with an organic process that operates at room temperature. The savings from reduced energy, labour and waste disposal costs amount to $60,000 per annum. Background Always Powder Coating (APC) operates a powder coating facility in Melbourne's eastern suburbs and specialises in ...


  • Titanium Scrap Metal Processing

    Background A world-class processor of titanium scrap had a wash system whose cleaning solution was becoming contaminated with both free floating unemulsified tramp oil and emulsified water soluble oil that was being washed off of titanium turnings. As the level of oil contamination increased over time in the wash solution, cleaning effectiveness diminished. The processor uses a metric, ...

  • Magstream-p - case studies

    HDL Magnetic scale preventers enhance quality and cut costs at jaguar Installed HDL unit in phosphate spray pipework in Dec 1988 Before     2x 2000 gals tankers removed sludge every six weeks Now     One tanker every 12 weeks is more than enough Before     Jets blocked Now     jets stay clean ...

  • Basic operation of a Cycle Stop Valve

    Automatic pump control methods are described as a pump system that automatically delivers water when a tap is opened, and automatically stops the pump after all taps are closed. A variety of pump control methods have been used in the past. The Cycle Stop Valve replaces: Variable Frequency Drives (VFD’s) or “Constant Pressure Pumps”. Large pressure ...


    By Cycle Stop Valves, Inc.

  • Case Study: Precision Machine Shop Eliminates Sewer Discharge

    Samsco Water Evaporator enables both cost reduction and elimination of sewer discharge. TEC, Inc. (Rockville, MD), providers of precision sheet metal fabrication and precision machining, for more than thirty years, has partnered with many well-known technology companies to meet their need for superior quality, precision metal products.  Their offerings range from simple metal components to ...


    By Samsco Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you