roll-off liner Articles

  • Capturing biogas energy to increase your business profits while safeguarding the environment

    Methane is a biogas produced from swine or cow manure, as well as food processing and meat packing waste. Methane is a natural gas, that when left uncollected, contributes to the harmful greenhouse gases in the earth’s atmosphere. When biogas is captured under a cover and becomes concentrated, it creates a corrosive and toxic byproduct called hydrogen sulfide. The gas generates a rotten egg ...

  • Frostbite And Hypothermia Hazards

    Hypothermia and frostbite can be two of the serious consequences of working outdoors in winter weather. Hypothermia is a dangerous lowering of the body’s temperature by exposure to cold or wet conditions. Actually, the air temperature doesn’t have to be particularly low to cause hypothermia – just getting wet and chilled can do the same thing. Hypothermia can be fatal. ...


    By SafetySmart

  • Build your pond to last with a liquid liner

    Build a pond without providing proper sealing and you'll probably be watching your money getting washed down the drain. Pond cracks, pond holes and pond leaks can be a persistent and costly problem so heading them off before they start in the construction process is a very good idea. That means paying particular attention to lining your ...


    By Pondpro2000

  • How to fit a box-welded pond liner for a perfect water feature

    Box-welded pond liners are also commonly referred to as tailored-to-fit, bespoke, made-to-measure or tailor-made pond liners. All terms are recognised by professional landscapers and by pond liner manufacturers. Suited to formal pond designs, a box-welded pond liner provides the best fit with no unsightly seams or folds. A ...


    By Russetts Development Ltd

  • Excavation, Retrieval, and Off-Site Disposal

    Introduction: Contaminated material is removed and transported to permitted off-site treatment and/or disposal facilities. Some pretreatment of the contaminated media usually is required in order to meet land disposal restrictions. Confined disposal facilities (CDFs) are engineered structure enclosed by dikes and designed to retain dredged materials. A CDF may have a large cell for ...

  • OEM off-highway `You`re an enabler`

    OEMs are spending large sums of money in order to meet the continually tightening regulations in regards to fuel consumption and emissions reduction. The sheer size of equipment on top of high productivity demands causes frequent overheating—sometimes daily depending on the conditions. Evans Cooling Systems Inc., Sharon, CT, offers a coolant without water which allows equipment to run ...


    By Evans Cooling Systems, Inc.

  • OEM off-highway `Why aren`t engine OEM`s already using waterless coolant`

    In simple terms, the engine OEMs have been comfortable with existing cooling system arrangements. Engineers leaving school and heading for employment with truck/engine manufactures are educated in the use and limitations of water-based coolants and in many instances, when asked to evaluate the possibility of using a waterless coolant in their engines, they often make assumptions on what they know ...


    By Evans Cooling Systems, Inc.

  • Using Geosynthetics in Slope Stability

    The majority of slope failures within the geosynthetics industry can often be avoided with proper engineering and material selection. However, the factors that affect slope stability can be difficult to discern and measure. Soil thickness, seepage forces, seismic forces, gas uplift, geomembrane texturing, engineering and provision of reinforcing elements are only a few of the factors affecting ...


    By Agru America, Inc.

  • Landfill gas explosive for global warming

    In response to EPA’s 1991 landfill rules that pushed the industry to larger facilities, landfill operator’s today pile and compact trash on the ground into giant mounds in the shape of a four sided pyramid. As originally contemplated, these mounds of trash were encased in liners to keep the wastes dry so contaminants would not be mobilized to leak into groundwater, along with ...


  • First use of a GCL in a copper heap leach pad

    PROJECT: Carlota Copper Mine Heap Leach Pad LOCATION: Globe Miami, AZ PRODUCTS: BENTOMAT® DN BACKGROUND: The Carlota Copper mine is an open-pit copper mine located approximately six miles west of Miami, Arizona. The site produces LME grade copper cathode through the process of heap leaching, in which a chemical solution ...


    By CETCO

  • Make pond repair a snap with PondPro

    Pond repair can be labor intensive, costly and frustrating. If you've ever experienced that sinking feeling when you realize that the water level in your pond is steadily decreasing, you know what a hassle repairing leaks can be. For most pond owners, it brings up visions of buying a liner and hoping it will fit and will provide the coverage you need and perhaps repeating the process more than ...


    By Pondpro2000

  • Make pond repair a snap with PondPro

    Pond repair can be labor intensive, costly and frustrating. If you've ever experienced that sinking feeling when you realize that the water level in your pond is steadily decreasing, you know what a hassle repairing leaks can be. For most pond owners, it brings up visions of buying a liner and hoping it will fit and will provide the coverage you need and perhaps repeating the process more than ...


    By Pondpro2000

  • Residential source separated organics collection strategies

    For many municipal jurisdictions across Canada and the U.S. seeking to maximize the diversion of residential solid waste from landfill, food residue offers the next level of “low hanging fruit” in the spectrum of residential waste, offering an incremental diversion through source separation organics (SSO). When designed and implemented correctly, the incremental diversion may top 20 ...


    By Waste Advantage Magazine

  • GCL serves as cap in brownfield remediation site

    PROJECT: Patterson Plank Road Brownfield Remediation LOCATION: Patterson, New Jersey PRODUCTS: BENTOMAT® SDN BACKGROUND: This New Jersey brownfield was formerly the site of a chemical recycling facility. CHALLENGE: The soil at the site was heavily contaminated, and off-site removal would have ...


    By CETCO

  • Waterless coolant extends engine life, saves fuel

    Forget about overheating your cooling systems if you use Evans waterless coolant. With a boiling point of 375 degrees and a freezing point of -40 degrees, your engine operates more efficiently and reduces the cooling load on radiator and fan, says Mark Stone of Evans Cooling Systems, Inc. “Water based coolants run at or near their boiling point, while Evans waterless coolants, due to their ...


    By Evans Cooling Systems, Inc.

  • Food Waste Collection Companies Grow With The Flow

    On October 1, the Commonwealth of Massachusetts’ ban on landfill disposal of commercial organics from establishments generating one ton or more of food waste per week goes into effect. On the front lines of helping these businesses and institutions comply are organics haulers, many of whom have been offering their services for years. “Seven years ago, we were servicing about two dozen ...


    By BioCycle Magazine

  • Geotube Dewatering for Lagoon Sludge - Case Study

    Background In many animal waste management schemes it is desirable to separate solids from waste water and/or manures. In cooperation with the Department of Animal and Dairy Science, animal waste specialists from Biological and Agricultural Engineering are field testing a technology new to agriculture, to remove solids from lagoons. The test is currently being conducted at the UGA Dairy ...

  • Bulk Storage and Piping Case Study

    Background: This major steel manufacturer was founded in 1900 in and established the first formal research department in the steel industry in 1910. It grew through the development of specialty steels and new technology. Among the many "firsts" was the development of continuous rolling technology. This company holds more U.S. patents than any other specialty steel company. ...


    By Mech-Chem Associates, Inc.

  • Common Treatment Technologies for Halogenated SVOCs in Soil, Sediment, and Sludge

    Common treatment technologies for halogenated SVOCs in soil, sediment, and sludge include biodegradation, dehalogenation, incineration, and excavation with off-site disposal. All types of biodegradation, both in situ or ex situ, can be considered to remediate soils: in situ bioremediation, bioventing, composting, controlled solid phase, or landfarming. Slurry phase biological treatment is also ...

  • Clarifier maintenance

    Clarifiers are expensive, to buy or repair, and their downtime can be costly in fines imposed by regulatory agencies and in community ill will. Regular maintenance, an annual inspection of the mechanism and an occasional touchup of the paint or coating system are simple and inexpensive proactive steps that will usually prevent most problems. Three components of all clarifiers require maintenance: ...


    By WesTech Engineering, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you