safety inspection Articles

  • Dam safety inspections

    This dam safety inspection was carried out to monitor the safety of a stone masonry overflow dam (12m high and 161m long). The geological makeup of the region comprises Ordovician period limestone and loose Quaternary sediments. One set of data was collected by placing 64 ...

  • What To Do When OSHA Arrives - Part 1

    Continuing Our Guide for New Plant Safety Managers You have been the new plant safety manager for a little over two months. During this timeframe you have had the opportunity to review the limited number of safety procedures left in your office by your predecessor and you are beginning to ...


    By Antea Group - USA

  • Growth and Evolution of a Municipal Pool Safety and Inspection Program

    The city of Plano Health Department swimming pool safety and inspection program has been growing and evolving since 1992. Currently, five environmental health specialists inspect 370 permitted commercial swimming pools. The environmental health specialists, who are all well trained and are Certified Pool Operators by the National Swimming Pool Foundation, inspect each facility twice during the ...

  • Restaurant Inspection Frequency and Food Safety Compliance

    Although food premises are regularly inspected, little information is available on the effect of inspections on compliance records, particularly with respect to the impact of the frequency of inspection on compliance. The following presents the outcome of a study designed to assess the impact of increased inspection frequency on compliance measures in Hamilton, Ontario, in the absence of any ...

  • Environmental/Safety Management: Dissecting an OSHA Inspection

    Understanding OSHA inspections can help utilities prepare, preventing fines and penalties associated with non-compliance. While catastrophes and fatal accidents are obvious inspection triggers, almost half of OSHA (Occupational Safety and Health Admini- stration) visitations are complaint-driven. Therefore, the best way to avoid an inspection—and potential fines and penalties—is to eliminate ...


    By 3E Company

  • Underground Water Tanks: Understanding the installation process is the first step in safety inspections

    Underground storage tanks are increasingly becoming essential components of building projects, driven by rising interest in on-site rainwater and graywater collection and reuse. As a result, building officials may need to expand their expertise to include these products and their components. Some safety inspection work is obvious; for instance, checking that the installer or project owner ...


    By Xerxes Corporation

  • Automotive Engine Inspection

    Headquartered in Michigan, the heart of the US automotive industry, we are proud to offer a video borescope that helps ensure the quality, safety and reliability of cars and trucks. Our scopes are in use at every major auto manufacturer and dozens of tier 1 and tier 2 suppliers, saving time and money in QC, production and process machine maintenance. While automotive industry applications for the ...


    By RF System Lab.

  • How To Survive An OSHA Inspection

    Untitled Document While there's little upside to facing an Occupational Safety and Health Administration (OSHA) inspection, it is possible to ...


    By 3E Company

  • Factory Conveyor Inspection

    A plywood manufacturer needed to inspect the roller bearings for its main conveyor motors. This inspection required a shutdown of the entire production line, and every minute of downtime would cost money. Additionally, because the motors were located in hard to reach areas, some several meters high, a portable and lightweight instrument would be needed. The VJ-ADV video borescope from RF System ...


    By RF System Lab.

  • REACH: How to prepare for the inspection?

    Inspections REACH: what are they? With the publication of Decree Sanctions (Legislative Decree no. 133/2009, published in the Official Gazette of 24/09/2009 ) which provides for the application of penalties in cases of non-compliance with the provisions of the REACH Regulation, began an intense program monitoring and verification by the ...


    By Selerant srl

  • Advanced Aboveground Storage Tank Inspections – In-Service Robotics Tank Inspections

    This paper describes the advanced in-service tank inspection methods available for use in the inspection of aboveground storage tanks (AST) in the petroleum and petrochemical industry. ASTs are subject to several federal and state regulations requiring tank owners to perform tank floor/bottom integrity, seals system, and deck fittings inspections on a routine basis. The conventional procedure for ...


    By Trinity Consultants

  • Accepted Inspection Methods of Process Sewers.

    During the process of refining there is discharge of hazardous waste, this coupled with aging pipeline infrastructure creates a potential where waste can leak into the environment posing catastrophic threats to life. Federal agencies such as the EPA are beginning to penalize refineries that do not take necessary measures of disposing their waste. These refineries are subject to ...


    By EnTech Engineering, Inc

  • Not Had Your Inspection Yet? Be Prepared!

    The CQC Notification We had our CQC inspection this week and if it hadn’t have been for the fact that we were notified of the visit the day before we were to move to a new clinical computer system (SystmOne) we might not have felt quite so anxious about our impending visit! Whilst everything we do is in preparation for an inspection there’s nothing like a deadline to ...

  • New White Paper Explains How to Improve Safety Inspection of Pumped Food Lines

    A wide range of processed food passes through pipelines everyday, from meat and poultry to dairy products, and fruit and vegetables to confectionery. However, contamination detection in pumped products can prove challenging. Safeline X-ray's brand-new white paper entitled "Improving Food Safety Inspection of Pumped Products" explains how metal detection and x-ray pipeline inspection ...


    By Mettler - Toledo Int. Inc

  • It’s Time to Prepare for an OSHA PSM Inspection

    Companies who are required to comply with OSHA’s Process Safety Management standard (1910:119) should be on high alert now that inspectors are being encouraged to complete more time-consuming, complex investigations. The reason? OSHA’s new enforcement weighting ...


    By Intelex Technologies Inc.

  • MSHA Update: June Impact Inspection Results and More

    The summer is often a slow time for industry updates. Not so for the United States Mine Safety and Health Administration (MSHA) this year. From the results of their June impact inspections and the legacy of the Upper Big Branch explosion, to the discussions around a new proposed rule and their upcoming 40th anniversary, MSHA’s been keeping busy. Here are the highlights. The ...


    By Intelex Technologies Inc.

  • Dam Inspection: A Day at Still Creek Dam

    We’ve been busy lately visiting various municipalities, police forces, aquaculture sites, and water treatment plants showcasing both our portable ROV systems and our new product line, the DT340 Pipe Crawler. One project in particular, took place at the Still Creek Dam in Tamaqua, PA. Cody and Sam packed up the crawler and headed down ...


    By Deep Trekker Inc.

  • `Advanced Aboveground Storage Tank Inspections - In Service Robotics Tank Inspections,` presented at the 2004 NPRA Environmental Conference

    Abstract This paper describes the advanced in-service tank inspection methods available for use in the inspection of aboveground storage tanks (AST) in the petroleum and petrochemical industry. ASTs are subject to several federal and state regulations requiring tank owners to perform tank floor/bottom integrity, seals system, and deck fittings inspections on a routine basis. The conventional ...


    By Trinity Consultants

  • Benchmarking Health and Safety Performance

    Identifying Indicators and Improving Benchmarking health and safety performance at work is vital to all organisations who want to excel beyond the threshold of legislative compliance. Safety practitioners whose aim is only to legally comply with legislation may be seen as a re-active safety practitioner, scraping by rather than ...


    By SHEilds Ltd

  • Electric Safety in the Workplace

    Every day, in every business, there is one bill the employer will pay and that is the electricity bill. Electricity is used constantly, whether it is boiling a kettle, using a computer or equipment. It is intrinsic to our lives and is vital for our day to day activities. It is easy to take for granted; every now and then we are reminded of its importance. An example of this is when there is a ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you