safety monitoring Articles

  • Technical and safety practices

    Safety is absolutely paramount in the medical industry, with lives literally at stake if something were o go wrong. Regrettably, this was more than reinforced recently following the tragic news of a death of a newborn at a hospital in Sydney, Australia, after it was mistakenly administered nitrous oxide (N2O) instead of oxygen (O2) in July this ...


    By Geotech

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • Learn How to Better Balance Equipment Performance and Worker Safety with Our Latest Application Note

    Do you want to ensure the safety and health of the workers at your warehouse and maximize the performance of the equipment they use? Here at E Instruments, we know that having a successful, and fully-functioning warehouse is dependent on whether or not the equipment is being maximized, and if the workers are working in a healthy environment that encourages productivity. However, we also know all ...

  • Flow Rate Measurement in Full Pipes Using the Transit Time Method

    Particularly in large diameters the relevance of water volume measurement is growing. The challenge with cooling water or fresh water processes is to generate accurate flow recordings or to document and to control individual consumptions and withdrawal quantities. Flow detection, however, particularly in large diameters is highly demanding. In such cases the transit time measurement thanks to its ...


    By NIVUS GmbH

  • How a contract research lab advanced its polymer characterization capabilities

    Realizing the Advantages of Ultra-High-Performance Size Exclusion Chromatography Compared to GPC Intertek is a global provider of quality and safety services designed to help businesses improve products, assets and processes, overcome market constraints and reduce risks. From auditing and inspection, to testing, training, and certification, Intertek enables customers to meet end ...


    By Waters Corporation

  • Oil Sampling Best Practices (Part 2)

    Understanding Dynamic Particle Equilibrium in Closed Loop Systems Dynamic Equilibrium Condition (DEC) is defined as a steady state condition where the normal wear rate in a machine results in no net gain or loss of particles. ...


    By Spectro Scientific

  • Safety Monitoring in HF Alkylation Units

    How GasFinder works Boreal Laser’s GasFinder & GasFinder MC are open-path gas detectors that use an integrated transmitter/receiver unit and a remote, passive retro-reflector. In GasFinder (see below) the transceiver also houses the laser diode, drive electronics, detector module and micro-computer subsystems. The transceiver unit is contained in an IP65 enclosure and has connectors for power ...


    By Boreal Laser Inc.

  • Abandoning Monitoring Wells: Safety Issues

    Monitoring wells are typically constructed to gauge the extent of contamination, assess water quality and conduct other hydrogeologic studies. Depending on its objective, the monitoring well may remain in use or may be abandoned permanently. When declared inactive, the well is many a times left as it is. Open unused wells are hazardous to life and environment: • Contamination may spread from one ...

  • Water monitoring as a safety feature for nuclear desalination

    It is widely accepted that the general safety approach for nuclear facilities is valid for a Nuclear Desalination Plant (NDP), thus IAEA standards and guides are applicable. The coupling of a NDP should be designed with the safety objective of ensuring that it results in no adverse effect on the Nuclear Power Plant (NPP) safety. The first objective (provisions of barriers) is complied with by the ...


    By Inderscience Publishers

  • Monitoring vibrations, mechanical seals, and bearings for safety and performance

    With more than 70 years of experience in plastics processing, Switzerland-based Quadrant Group is a leading expert in a wide range of polymer materials and technologies for polymer conversion. In order to maintain a high level of quality in the production process, Quadrant's heat-transfer pumps must work safely and reliably. These pumps are commonly subjected to high loads. At the same time, ...


    By ALLWEILER GmbH

  • Temperature and leak monitoring boosts safety and reliability

    Amcor Flexibles Singen GmbH is a manufacturer of printed and unprinted aluminum-based packaging materials and an experienced technical applications specialist. Its plant in Germany, equipped with rolling mills and finishing equipment, turns out approximately 200 million square meters of aluminum foil in various grades every year. High-performance drying equipment is essential for Amcor’s ...


    By ALLWEILER GmbH

  • Comfort and safety

    Type HOFGAS® - Ready/C 300  Commissioning 2004Site Moncorneil (FR) Situation Moncorneil is a medium-sized landfill near Toulouse. A heating boiler is to be operated with landfill gas and the acquired heat is used for leachate treatment. In view of the complete landfill design the customer demands a container construction with remote monitoring of the plant.   ...


    By Hofstetter BV

  • Job Safety Analysis and Safety Alerts

    When you're working on the field, always remember to apply best practices and job safety analysis (JSA) to ensure a safe workplace. Below are insights into the JSA process, and how it helps manage occupational incidents.  ...


    By EHS Insight

  • Auotclaves and Nitrogen. Why an Oxygen Monitor may be Required for Safety

    In many industries, including aerospace, autoclaves play an important role in the manufacturing process. Key components of aerospace systems need to be put under an intense pressure and temperature during their formation; at present, an autoclave offers the best and safest way to do this. However, the manufacturing process usually uses nitrogen to create high levels of pressure in the system and ...

  • Case study - New N2O monitor for occupational health and safety

    The new Geotech G200 range of N2O analysers measures N2O at 0-1000ppm or at 0-100 percent with accuracy, speed and ease-of-use.  With options for CO2, O2 and CO, the G200 range can assist anaesthetists and ...


    By Geotech

  • Long Lasting Safety with PureAire Monitoring Systems’ 10+ year sensors

    When it comes to oxygen deficiency monitors, PureAire makes the longest lasting units on the market. They believe your safety should not be taken lightly, and have created a reliable and affordable monitor that will outlast all of their competitors. PureAire Monitoring Systems has broken away from the norm of using disposable sensor cells, and has introduced the groundbreaking technology of a 10+ ...

  • Monitoring oxygen levels for personnel safety in food packaging facility - Case Study

    Ghanim International have installed three EC96 oxygen deficiency monitors to monitor the oxygen levels at their manufacturing facility. Ghanim International UK Ltd, a subsidiary of Brunei Wafirah Holdings, was established in August 2011. Currently they manufacture their own label products from a production site in Birmingham but aim to acquire their own abattoirs and poultry ...


    By Systech Instruments Ltd

  • Additive Manufacturing 3D Printing: The Growth Progress and Need for Safety Monitors

    Additive Manufacturing 3D Printing: The Growth Progress and Need for Safety Monitors 3D printing is officially skyrocketing, with industrial applications in medical, biotech, aerospace, defense, and consumer electronics industries growing daily. At the heart of this acceleration is the additive manufacturing or AM process, which allows for easy printing from computer-aided ...

  • CO2 Monitor For Breweries: Carbon Dioxide Safety and How to Stay Safe

    Carbon dioxide is a necessary byproduct of the brewing process, yet too much CO2 can be dangerous to employee health. In Germany, two workers died at the same brewery in 2012 due to hazardous levels of CO2 present in beer mixing and pressure tanks. Learn more about how CO2 levels can get out of control during the beer brewing process and ways to protect your staff from this deadly gas.  ...

  • The Path to Safety for Pharmaceutical and Laboratories: Why O2 Deficiency Monitors May be Required?

    To safeguard against gas leaks in pharmaceutical industries and laboratories, businesses are turning to oxygen deficiency monitors. Learn when, where, and why an oxygen monitor or O2 monitor may be required.  Oxygen Monitors in Medical and Pharmaceutical Settings In the hospital setting, nitrogen gas is ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you