safety product Articles

  • What does the RoHS certification mean for OTT products?

    The EU Directive 2011/65 / EU is intended to limit the use of hazardous substances in electrical and electronic equipment. Since 22 July 2017 the RoHS regulation is applicable to monitoring and control instruments, including OTT devices and sensors. From this point onwards, we must have a RoHS certification for all devices and sensors. As of 22 July, RoHS is also a compulsory part of the CE ...


    By The OTT Hydromet Group

  • Safety vs. Environment Protection: Study Discovers Increasing Salt Levels in Lakes

    A recent study published by the US-American National Academy of Sciences revealed an increasing salt amount in form of chloride in rural and urban freshwater lakes around the American continent. The scientists believe, that mainly road salt distributed on icy roadways is to blame. Increasing salt levels threaten eco systems Road de-icing salt is blamed for rising salt levels in ...

  • What does the soon mandatory RoHS certification mean for Lufft products?

    Up to now RoHS wasn’t mandatory for us because we were affected by an exception rule concerning monitoring and control instruments. This exception will end on July 22, 2017 meaning that all products on the market need to be compliant with the RoHS regulations henceforward. If we couldn’t ensure this, we aren’t allowed to further sell and export them. As an environmental ...

  • Oxygen Monitors now Required for Nitrogen, Argon, Helium, and CO2 use in Denver

    The Colorado city of Denver recently passed a new law that requires facilities that use insert gas to install oxygen deficiency monitors wherever these gases are used in excess of 100 pounds. Learn what the new law requires from businesses and how an oxygen sensor protects your employees, your business, and your peace of mind.  What Denver's New Law Requires  The law ...

  • Expert Installation Services Soar to New Heights

    Along with providing equipment to solve customer’s complex VOC, NOx, and Odor pollution challenges, we also provide installation services. I was on site for the recent “lift” of a new QUADRANT SR-35,000 Thermal Oxidizer (TO). Capital equipment, like a Thermal Oxidizer, is designed to operate for many years; however wear and tear eventually may require the equipment to be ...

  • Innovation and efficiency at the forefront of long-standing partnership

    Wiltshire-based Malaby Biogas operates one of the few independent anaerobic digestion (AD) plants in the UK, specialising in the diversion of food waste from landfill. Its Bore Hill Farm Biodigester provides a combined waste disposal and energy generation solution in one safe, clean and highly-efficient process and the facility has gained a wide-ranging ...


    By Geotech

  • Maintenance Tips: Thermocouples

    Keeping air pollution control equipment properly maintained is essential for meeting regulatory requirements and efficient operation. Here on the CPI blog, we regularly share tips on maintaining your systems, which requires replacing components on a yearly basis. Today we're taking a closer look at the importance of replacing ...

  • Production, safety, fighting, and risk

    Two agents make a trade–off between production and safety investment, fighting for joint production. Ceteris paribus, if agent 1 has a higher unit cost of production, lower emphasis on safety causes more fighting and higher utility for agent 1, and less production and safety effort by agent 1.Keywords: production, safety investment, fighting, risk, economics, productive ...


    By Inderscience Publishers

  • Production, safety, exchange, and risk

    Two agents convert resources into safety investment and production while exchanging goods voluntarily. Safety investment ensures reduction of costly risk. High unit cost of safety effort reduces both productive effort and safety effort, which reduces income.Keywords: production, safety investment, goods exchange, safety risk, economics, productive investment, trade, price, voluntary ...


    By Inderscience Publishers

  • The consumer product safety commission and nanotechnology

    During the fall of 2007, many Americans faced a hazard in their products that had been banned for 30 years—lead. As millions of children’s toys were recalled, it became clear that government oversight had failed, and that the agency primarily responsible for the oversight of these toys— the US Consumer Product Safety Commission (CPSC)—was stretched too thin from years of neglect, underfunding and ...


    By Bergeson & Campbell, P.C.

  • Safety Spotlight: Driver Safety

    According to the US Bureau of Labor Statistics' most recent report, almost a quarter of Fatal Occupational Injuries were attributed to roadway incidents. This represented a 5% increase on the previous year. Road accidents are also unsurprisingly the leading cause of on-the-job death for truck drivers in the United States.  Robust ...

  • Pesticide Safety

    Where I live, in eastern, northern, southeastern Pennsylvania (you figure it out), nights are beginning to chill. I've noticed this for two reasons. First, the temperature is dipping below 50. Second, insects have begun finding their way inside the house. We capture most of the little buggers and release them but sooner or later someone reaches for a pesticide. We've already dealt with fleas on ...


  • Application of total quality management techniques to safety analysis in software product development

    The safety level of any system may be defined as the probability that no catastrophic accident is expected to occur during system operation, for a specified period of time. The purpose of software safety analysis is to reduce system risk, due to software malfunctions, to an acceptable level. Conventional software safety analysis techniques are reactive in orientation. They are intended to ...


    By Inderscience Publishers

  • Low cost retrofit of bag dump station upgrades safety, productivity at plant

    ArrMaz Custom Chemicals produces specialty chemicals for the mining, water treatment, fertilizer, asphalt, and construction industries at its manufacturing facility in Mulberry, Florida. In addition to extensive quality control and customer service programs, the company has implemented a “Total Safety Culture” procedure to protect both its employees and the subtropical ecosystem of ...


    By Flexicon Corporation

  • New OECD Product Recall Portal allows Easy Access to Safety Alerts

    On October 19, 2012, the Organisation for Economic Co-operation and Development (OECD) announced the launch of the GlobalRecalls ...


    By SGS

  • Safety and productivity trade-offs: managing nuclear reactor outages

    Risk management is a critical function in all organisations, particularly those that operate high-risk systems such as chemical processing facilities or offshore oil platforms. In this context, risk management extends beyond the protection of financial assets to deal with issues of public concern including human safety and environmental impact. It is clear that these critical systems operate with ...


    By Inderscience Publishers

  • Guidance on scope of Section 108 of the Consumer Product Safety Improvement Act of 2008

    On February 12, 2009, the US Consumer Product Safety Commission (CPSC) issued draft guidance regarding which children’s products are subject to the requirements of Section 108 of the Consumer Product Safety Improvement Act of 2008 (CPSIA). Section 108 prohibits the sale of any children’s toy or child care article containing more than 0.1 percent of di-(2-ethylhexyl) phthalate, dibutyl phthalate, ...


    By Bergeson & Campbell, P.C.

  • Innovation & safety: overcoming two of the biggest challenges in cosmetics product development

    Over the last couple of years, I have been traveling around the world talking to scientists and business leaders in the Cosmetics and Personal Care (CPC) Industry in order to understand their scientific and business challenges.  You know, the kinds of thing that are keeping them up at night.  And, what are these leaders saying? Well, mainly they see two big challenges facing them in the ...


    By Waters Corporation

  • Tandem Quad Mass Spectrometry: The Foundation of Product Safety, Efficacy, and Decision-making

    There is a rightfully high expectation from consumers that the amounts of compounds and ingredients that producers report in their goods are accurate down to trace levels. Whether personally or professionally, we all rely on this analytical information coming from laboratories that enables critical decisions to be made. Analytical chemists have been performing quantitative studies for ...


    By Waters Corporation

  • The Future of Safety at EHS Today’s Safety Leadership Conference

    Here at Intelex we rely on EHS Today as an important source of industry news, as do many of our customers. It was no surprise that their conference covered some of the most cutting-edge trends in the Environmental, Health and Safety space. Intelex Health and Safety Practice Manager Eric Morris was among those discussing where safety is heading through his workshop entitled, “The Future of ...


    By Intelex Technologies Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you