sample automation equipment Articles

  • A Remote Automated Optical Field Sampling System based on the UniSpec-DC equipped with a Wireless System

    For remote locations, a reliable and repeatable field sampling method is needed for monitoring ecosystem processes for various scientific reasons (e.g. ground truthing, link vegetation indices to ecophysiological variables) (Claudio et al., in press; Fuentes et al., in press, Cheng et al., in press). To ensure that the data are collected continuously, and to collect the data during severe weather ...


    By PP Systems

  • LIMS and the Automation of the Water Lab

    (Reproduced by permission from Laboratorium Magazine) Europe’s most modern water lab is located in Leeuwarden, in the Netherlands. Vitens made a big splash when it brought this modern building, with its transparent design, into operation in January 2005. Many colleagues from Dutch and foreign labs are eager to visit this installation, where water control samples are routed automatically with the ...


    By STARLIMS Corporation

  • ELITe InGenius a new Molecular Diagnostics Sample-to-Result solution and first fully automated sample-to-result solution introduced with transplant monitoring menu

    ELITe InGenius is an integrated sample to-result solution dedicated to Molecular Diagnostics which automatically performs extraction, amplification and result interpretation with an unprecedented flexibility and assay menu possibility. The system combines a universal extraction process in unitary cartridge with individual and independently controlled RT PCR in cassette based format enabling the ...


    By ELITech Group

  • Sensors & Automation to Simplify Bioprocess Operations

    Utilising sensors & automation to simplify bioprocess operations means that more work can be done in less time. By automating the routine tasks carried out in the lab, valuable time can be devoted to more important tasks. Here are two practical examples of automating routine tasks in upstream and downstream bioprocessing with relatively simple instrumentation. Automated ...


    By Broadley-James Ltd

  • Sample System Best Practices for Water and Hydrocarbon DP Applications

    Abstract Sampling techniques for BTU and moisture measurements are well understood but applications beyond the routine requires additional attention to detail. Two such applications are the subject of this paper. The first is the measurement of low level moisture (1 – 1,000 ppbv) for cryogenic processes. Measuring moisture below 1 ppm is an entirely different world from the traditional ...

  • Chemical industries - Products that shine

    Kiilto Oy (‘Shine’ in English) is an old and established chemical industry company south of Tampere, Finland. Kiilto was founded already in 1919 and has since then grown steadily to a middle-sized producer of glues and many other products for industrial and consumer applications. The total number of Kiilto products is close to a thousand. Kiilto also has expanded to foreign countries ...


    By Kopar Oy

  • Determination of Ammonia and Nitrogen

    Customer: CAE Grand Ouest, France CAE is a laboratory of the Veolia Group located in Western France. The laboratory is specializing in environmental analysis, especially in water and soil analysis. Application: Determination of Ammonia and TKN in waste water and soil Total Kjeldahl Nitrogen (TKN) and Ammonia are common parameters for the evaluation of ...


    By BÜCHI Labortechnik AG

  • Integration of LIMS and Remote Sampler at Northern Ireland Water Delivers Enhanced Audit Trail, Significant Time and Cost Savings

    Northern Ireland Water is the sole provider of water and sewerage services in Northern Ireland. It is a Government Owned Company (GoCo) established in April 2007 to serve approximately 795,000 domestic, agricultural, commercial and business properties connected to the public water supply and 660,000 properties connected to the public sewer system. Every day Northern Ireland Water (NI Water) ...

  • Water Monitoring in drinking water plants - The Comparison Between On-Line TOC Analysis and the Permanganate Oxidation Method

    Introduction The role ofthe plants providing water is not restricted to the collection of water from areas where abundantly available and then distribution to the consumer. In reality, it involves a serious commitment to the guarantee of waterwhich is high quality. For this reason, drinking water facilities make use of conditioning plants which are equipped with chemical lab ...


    By Envitech Ltd.

  • Solutions for Automotive Testing

    In recent years, the field of research, development and testing of vehicles has created a need for integrated testing systems which cover the entire vehicle including engine and driveline. These systems also need to be capable of being deployed globally in a supportive structure. As a means of responding to these market requirements, building on our strengths in vehicle emissions measurement ...


    By HORIBA Europe GmbH

  • The search for water contamination can create hazards of its own

    It''s a paradox. Most of the very technologies being used today to test water for contaminants actually return more pollution to the environment than the tested water itself. Nevertheless, as we all know, water testing is crucial to our health. Modern industry has unleashed tens of thousands of chemicals into the environment. Many of these chemicals are essential, but it''s the control of them ...


    By Horizon Technology, Inc.

  • Arica Pago de Gomez, Chile - Case Study

    Fast Facts Contaminant: Arsenic Flow Rate: 2.5 MGD In November 2011, AdEdge Water Technologies was contacted byXylem Inc to design, supply and start up an arsenic treatment system for Aguas del Altiplano in Pago de Gomez, Arica-Chile. The Pago de Gomez Water Treatment Plant added an arsenic treatment unit to its existing ...

  • Soil CO2 Flux Measurements -- Powering the LI-8100/8150 in a Remote Location: Power Requirements and Solar Panel Solution

    INTRODUCTION Long-term automated simultaneous measurements at multiple locations within the same study site are often required to adequately characterize high spatial and temporal variability of the soil CO2 fluxes. The multiplexed LI-8100/8150 is a fully automated system ...


    By LI-COR

  • City of Houston Total Organic Carbon - Case Study

    ABSTRACT The City of Houston, Texas has been aware of the implications that current and pending regulatory standards would have on the operation of their four surface water treatment facilities. In particular, the City has closely monitored changes in regulations related to enhanced coagulation, total organic carbon (TOC) removal, and disinfection by-products (DBP) reduction. The ...


    By TOC Systems, Inc.

  • Avoiding Sewer Fires with Vapor Space Organics Monitoring

    ABSTRACTRegulation of flammable gases released from wastewater discharges is facilitated by the use of the Vapor Space Organics test method. Such regulation can reduce the risk of a flash sewer fire, resulting damage and potential injury. The updated 2003 VSO process developed by Severn Trent Laboratories produced data that was equivalent to the 1990 VSO process developed and used by the ...

  • CEMEX Installs TAPS

    CEMEX (previously the RMC Group) is a leading international supplier of materials to the construction industry, particularly ready mixed concrete, aggregates and cement. In order to demonstrate compliance, with UK legislation, CEMEX conducts a programme of field testing, sampling and analysis at a large number of sites across the United Kingdom.  From this activity, reports are provided to ...


    By Trilogy Group Limited

  • Project profile - Highland Hills MHC Highland, MI 450 GPM AD26 arsenic, iron system

    Background In January 2008 AdEdge Technologies, Inc. was selected among other vendors by Nationwide MHP to supply a turnkey arsenic, iron, and manganese treatment system for the Highland Hills MHP in Highland, Michigan. The system consists of multiple wells that combine together to serve potable water to 306 connections and a population of 765 in the community. Several options were ...

  • Project profile - Lakeview Estates Community Durand, MI AD26 arsenic, iron & manganese system

    Background In August, 2007 AdEdge Technologies, Inc. was selected among other vendors by Tri-County Drilling to supply an arsenic, iron, and manganese treatment system for the Lakeview Estates MHP in Durand, Michigan. The system consists of multiple wells that combine together to serve potable water to 239 connections in the community. Several options were considered based on the need to ...

  • Highland Hills MHP-MI Project Profile

    Background In January 2008 AdEdge Technologies, Inc. was selected among other vendors by Nationwide MHP to supply a turnkey arsenic, iron, and manganese treatment system for the Highland Hills MHP in Highland, Michigan. The system consists of multiple wells that combine together to serve potable water to 306 connections and a population of 765 in the community. Several options were ...

  • City of Aurora, Oregon - Case Study

    In late 2009, Water Works Engineers contacted AdEdge to design and implement an arsenic, iron, and manganese removal system to serve the City of Aurora, Oregon. The existing water supply consisted of three wells feeding into a centralized distribution system with a maximum combined capacity of 500 gpm. The site had an arsenic level of 12 ppb, above the EPA's MCL of 10 ppb. The City of Aurora also ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you