sample preparator Articles

  • Sample preparation for the analysis of matured timber

    The matured timber statute dedicates itself with the utilization and application of matured timber. A perfect assistant for the sample preparation are the FRITSCH Cutting Mills.  It especially includes rules concerning analysis for the examination of matured timber in regards to heavy metals (lead, cadmium, chromium etc.), arsenic, as well as PCP and PCB (pentachlorophenol and ...


    By Fritsch Milling and Sizing

  • Aflatoxin & ochratoxin sample preparation columns

    Simultaneous Analysis of Aflatoxins and Ochratoxin A - Sample Preparation Aflatoxins and Ochratoxin A are produced by fungi, e.g. Aspergillus and Penicillium species. Therefore both toxin types are found together in many foods and animal feeds, e.g. cereals. Thus it is appropriate to analyze one extract for the occurrence of both mycotoxins in a single step. A significant assistance ...


    By Pickering Laboratories, Inc.

  • Sample Preparation for Refuse Derived Fuels

    Plastic, wood and shredded waste, are in times of rising crude oil prices very interesting additions to the classic fuels. Especially in the cement industry, the energy rich fractions from conditioning processes are readily burned along. Important here is the analytical evaluation of the materials. Refuse derived fuels: Plastic, wood and shredded waste: Here are some examples of more or less well ...


    By Fritsch Milling and Sizing

  • Sample preparation for the analysis of secondary fuel in cement plants

    Secondary fuel can be a very inhomogeneous sample, containing all types of polymers, paper, wood and low fractions of metal. Also recycled wood or parts of automobile tires might be used as secondary fuel. Before using it as fuel in the production of cement, several chemical analyses are necessary as quality control. Cement is made by heating limestone (calcium carbonate), with small quantities ...


    By Fritsch Milling and Sizing

  • Analysis of PeCOD Technology and Comparison to Dichromate Method

    Abstract The main objective of this report was to determine if a correlation exists between peCOD technology and the dichromate method of estimating Chemical Oxygen Demand (COD). Additional investigations described in this report were: to identify whether particle size in water samples affects the estimate of COD obtained by peCOD analysis and, to identify whether peCOD analysis is ...


    By MANTECH INC.

  • On the right track

    High-speed train manufacturer, CAF, rely on world-class beamforming technology to reduce the noise generated by their trains – helping to make high-speed trains a more viable option for travellers and operators alike. Because of its relatively low levels of CO2 emissions, train travel is considered one of the ...

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Webinar Highlights: Microfluidics for macromolecules

    Hi, I’m Jim Murphy, Principal Consulting Chemist at Waters, and I recently collaborated with Lucinda (Cohen) Hittle to present an exciting webinar on the use of microflow chromatography for macromolecules.  Lucinda, a Director of Discovery Bioanalytics at Merck, presented an overview of the use of LC-MS for peptide analysis along with various case studies for in vitro and in vivo ...


    By Waters Corporation

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Caltech working to solve the world`s energy problems with the help of inVia

    Fossil fuels are the world's main fuel source for transportation, heating and generating electricity. As a by-product, high levels of CO2 are released into the atmosphere. With the drive for sustainable energy production, a method that generates easily-stored fuel from sunlight—and absorbs CO2—is a very attractive proposition. The California Institute of Technology ...


    By Renishaw plc

  • Sample Preparation of Glass and Ceramic Materials for Atomic Absorption Analysis

    The analysis of silicate-based glass and ceramics has always been a moderately difficult job, since the components that comprise the glass are usually not stable together in solution. For example, most typical acidic digestions that solubilize silicon will cause calcium fluoride to precipitate. If no fluoride is present, the silicon will not be fully decomposed, and if the solution is heated, ...


    By Buck Scientific Inc

  • The Preparation of Hollow Cylinder Specimens from Undisturbed Tube Samples of Soft Clay

    The use of torsional-hollow cylinder testing apparatus for research into soil stress-strain behavior has grown over the past decade. Most studies have focused on sands or on cohesive materials reconstituted in the laboratory. Studies involving undisturbed soft clay have been neglected, in part due to the difficulties involved in specimen preparation.The present paper describes a procedure for the ...


    By ASTM International

  • Sample preparation and analytical techniques for determination of polyaromatic hydrocarbons in soils

    Polyaromatic Hydrocarbons (PAHs) have been determined in soil samples for many years. PAHs can arise in the environment from natural sources, oil and petroleum products and combustion processes. Although oil spills influence PAHS concentrations in local areas, the major sources of PAHS are anthropogenic and derived from land based combustion sources. PAHs are globally distributed and the highest ...

  • Characterization of Polymer Carbon Sieves, Graphitized Polymer Carbons and Graphitized Carbon Blacks for Sample Preparation Applications

    The use of carbons in sample preparation techniques such as solid phase extraction (SPE) and air sampling has been ongoing for several decades. Recent advancements in sample preparation techniques have led to the use of carbons in micro-SPE (i.e., pipette tips packed with particles), solid phase microextraction (SPME) techniques and carbon coatings for both gas and liquid sample preparation ...


    By Sigma-Aldrich Co., LLC

  • Dialysis with a semipermeable membrane – a new sample-preparation technique for determination of Polybrominated Diphenyl ethers in fatty matrices

    Summary Dialysis with a low-density polyethylene semipermeable membrane (SPM) is an efficient means of removal of lipids in the determination of bioaccumulative, persistent, halogenated organic compounds. In this study an SPM was used for preconcentration of polybrominated diphenyl ethers (PBDE) from food samples. The method is useful for determination of PBDE and other halogenated ...


    By Exposmeter AB

  • PPCPs: Preparing for an uncertain regulatory future

    A recent study published in Environmental Pollution* identified 56 active pharmaceutical ingredients (APIs) in effluent samples from 50 large wastewater treatment plants across the U.S. Among the products found in samples were commonly prescribed anti-psychotic and antihypertensive drugs. As more studies continue to fuel public concerns over risks to public health and the environment, wastewater ...

  • Method Scaling in Preparative HPLC: Analytical Method & Preparative Method

    VOC:  “I tried to scale up my analytical HPLC method to prep and it didn’t work.” Andy:  This is one of the most common things we hear from chemists wanting to do preparative chromatography. We also hear the following question pretty often too: VOC:  “I have a good analytical HPLC method, how do I scale it to ...


    By Waters Corporation

  • Leader in sample preparation systems benefits from Axetris MFCs’ high dynamic range - Case Study

    Split ratio flexibility of GC injector increased 30-fold A leading manufacturer of analytical sample preparation systems in gas chromatography (GC) switched to Axetris MFCs - and in doing so, simplified their product range, while offering their customers at least 30 times more flexibility in split ratio. The market-leading dynamic range of Axetris mass flow controllers (MFCs)—with ...


    By Axetris Ag

  • The Universal Sampling Accessory

    Infrared Spectroscopy (IR) is one of the most descriptive “tools” available to the analytical organic chemist both for qualitative identification and quantitative determination of single and mixed components. Classically, most samples have been prepared for scanning by transmission, where the thickness becomes a very critical factor in the quality of the final spectrum. If the sample is too ...


    By Buck Scientific Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you