sampling container Articles

  • Analysis of PeCOD Technology and Comparison to Dichromate Method

    Abstract The main objective of this report was to determine if a correlation exists between peCOD technology and the dichromate method of estimating Chemical Oxygen Demand (COD). Additional investigations described in this report were: to identify whether particle size in water samples affects the estimate of COD obtained by peCOD analysis and, to identify whether peCOD analysis is ...


    By MANTECH INC.

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Ambient Air Sampling Methods

    Pollutants are nothing but any substance that may present in an atmosphere in such a concentration that it may harmful to surrounding, living organism or human being. Sampling and analysis of air pollutants is known as Air quality monitoring and it is major part of environmental monitoring. There are many advanced types of ambient air Sampling methods. we will learn here only which are most ...


    By Perfect Pollucon Services

  • Containment for Soil, Sediment, and Sludge

    Containment treatments are often performed to prevent, or significantly reduce, the migration of contaminants in soils or ground water. Containment is necessary whenever contaminated materials are to be buried or left in place at a site. In general, containment is performed when extensive subsurface contamination at a site precludes excavation and removal of wastes because of potential hazards, ...

  • Sample extraction kit user’s guide

    Intended Use This extraction kit is for use with the appropriate immunoassay test kit. Each Sample Extraction kit contains the materials necessary to process twelve (12) soil or wipe samples. Test Principles The reagents contained in the Sample Extraction kit have been optimized for fast, efficient removal of compounds from soil or surfaces and convenient ...


  • Sampling of Saturated and Unsaturated Sands by Freezing

    A 600-mm-long, 100-mm-wide, and 20-mm-thick steel plate containing a wavey groove carrying chilled ethanol at -40°C was used successfully to obtain undisturbed frozen samples of saturated clean sand. The freezing probe was also used in an unsaturated sand dune to obtain samples at a depth of 3.0 m. For sands above the groundwater level, an imbibition test is, however, required prior to freezing ...


    By ASTM International

  • Groundwater: Low-flow Purging and Sampling

    Significant timesavings, improved sample process integrity, quality assurance and minimal quantities of potentially contaminated purge water to manage - are attractive as the focus on groundwater quality sharpens and economics demand best cost-benefit based methods Water has become a vitally important resource.  Maintaining its quality and quantity and avoiding pollution are set to be ...


    By Geotech

  • Building Services Management - Air Sampling -

    Untitled Document Maintenance professionals are often the first responders to mold complaints in their facilities. building occupants can be exposed to fungal (mold) ...


    By EMSL Analytical, Inc.

  • Guidelines for the Identification of PCBs and Materials Containing PCBs

    This publication is intended to serve as a first guide on identifying PCBs and materials containing PCBs to assure the environmentally sound management of PCBs. It provides information on the known names, characteristics, and the uses for PCBs, as well as on the sampling and analysis techniques to indicate their ...


  • Eco-toxicity of oily wastes containing TENORM

    Oily wastes are considered as one of the most hazardous waste types. Additionally to petroleum components, they can contain radioactive elements. This study aimed to estimate the toxicity of four raw and two treated waste samples obtained from petroleum production yard. Eight elutriate bioassays using plants ( Raphanus sativus and algae Scenedesmus quadricauda ), crustacean ...


    By Inderscience Publishers

  • Simple and effective permeability testing of thermoformed plastic containers

    Daiwa Can is one of Japan's leading packaging manufacturers, supplying beverage manufacturers with top quality containers and creative packaging solutions. Daiwa Can’s plastic container range are multi-layer packages manufactured using a ...


    By Systech Instruments Ltd

  • Low cost treatment of wastewater containing mercury salts

    Removal of mercury from wastewater is of considerable significance from an environmental point of view. Treatment of wastewater containing mercury salts has been carried out with the help of modified fly-ash bed. The preparation of the bed material has been described. The effects of different parameters such as pH, exchange capacity and the presence of other constituents have been studied. ...


    By Inderscience Publishers

  • Containment for Ground Water, Surface Water, And Leachate

    Containment measures are often performed to prevent, or significantly reduce, the migration of contaminants in soils or ground water. Containment is necessary whenever contaminated materials are to be buried or left in place at a site. In general, containment is performed when extensive subsurface contamination at a site precludes excavation and removal of wastes because of potential hazards ...

  • The 10 Key Factors in Selecting a Stack Sampling Firm

    Summary: This document is a summary of the key factors that you should take into consideration when hiring a stack testing firm.This has been prepared in conjunction with the ASTM criteria for standard practice of testing companies.The ASTM criteria has been supplemented, based on 125 years of direct testing experience, which is the combined years of experience of the individuals that contributed ...

  • Sample preparation for the analysis of secondary fuel in cement plants

    Secondary fuel can be a very inhomogeneous sample, containing all types of polymers, paper, wood and low fractions of metal. Also recycled wood or parts of automobile tires might be used as secondary fuel. Before using it as fuel in the production of cement, several chemical analyses are necessary as quality control. Cement is made by heating limestone (calcium carbonate), with small quantities ...


    By Fritsch Milling and Sizing

  • FTIR gas analysis improves container safety

    Introduction Entry to freight containers represents a significant hazard to staff responsible for inspection, stuffing or destuffing because of the large number of airborne chemicals that can be present. Research in Germany and the Netherlands found hazardous levels of gases and vapours in around 20% of all containers and this level of contamination is now accepted as commonplace. It ...


    By Gasmet Technologies Oy

  • Use of Eight Well Purging and Sampling Record

    This article describes a groundwater well purging and sampling form that can be downloaded at our website. A click on the articles button will take you to a list of Monitoring Tips and Procedures articles, one of which is the sampling form. The form can be used to record  indicator parameters pH, conductivity, temperature, etc., taken during ...


    By RotaPump, Inc

  • Experimentally analysing compressive and tensile strengths of concrete containing steel waste fibres

    Considering increasing growth of using other materials in concrete for increasing its quality, studies on fibres have been recently extended. Existence of fibres can compensate for some of the weaknesses of concrete in terms of its brittleness and fragility. Now, in this study, role of steel waste fibres in compressive strength of cubic samples and tensile strength of cylindrical samples at ages ...


    By Inderscience Publishers

  • Thermal characterisation of a lightweight mortar containing expanded perlite for underground insulation

    This paper aims to investigate the use of expanded perlite in mortar, for further application of shotcrete to thermal insulation of underground mines. Mixes were designed according to the typical proportions of underground shotcrete, with the sand volumetrically substituted by expanded perlite. Tests of samples were conducted at four ages. Transient plane source technique was utilised to measure ...


    By Inderscience Publishers

  • SENSPOL evaluation of Cadmium, Lead and Copper onsite monitoring of water and soil samples

    This study details the onsite analysis of water and soil samples from 5 different locations in germany using the PDV6000plus and contains comparison data with Graphite Furnace Atomic Absorption ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you