scrap drum Articles

  • Garden Street Iron & Metal Processes 8,000 Tons of Scrap Each Month Using Variety of Eriez Recycling Equipment

    Problem: Garden Street Iron & Metal recycling complex, located just west of downtown Cincinnati, OH, has been owned and operated by the Weber family for more than five decades. The complex, set on 22 acres with three nearby rail spurs in Spring Grove, is a beehive of activity as both consumers and businesses truck in ferrous and nonferrous metal for re-processing. To remain on the ...


    By Eriez Magnetics Europe Ltd

  • The difference between Rotary and Vibratory Drum Technology which one is best for your process?

    When it comes to choosing the optimal drum technology for your foundry, there are two basic options available to foundries: vibratory drums and rotary drums. Both technologies other advantages in certain applications, and disadvantages in others. Vibratory Drums Vibratory drums come in two varieties… media and non-media applications. Vibratory drums are optimal for no-bake, ...


    By General Kinematics

  • Sorting Equipment Focus: Keeping Time

    (From Recycling Today Magazine) In with the new, out with the old. A reversal of an old adage is perhaps the best way to describe the increased demand for America’s scrap metals. The world’s hunger for new cars, appliances and buildings was a boon for steel makers in 2004.  Global steel production exceeded 1 billion tons last year, a record amount. And as the need for “new” steel products ...

  • Eriez FinesSort Reclaims Fine Metal Particles

    Eriez Magnetics Europe Ltd. FinesSort® Metal recovery system is the ultimate in fine particle metal reclamation. The FinesSort® helps scrap processor’s increase profitability by recovering materials less than 25mm in diameter and thus aids reduction in materials sent to landfill. The Eriez FinesSort is a two stage system incorporating a Rare Earth Permanent Magnetic Drum (Stage 1a) ...


    By Eriez Magnetics Europe Ltd

  • Three way partnership

    Scrap Producers—Scrap Dealers—Sweed Machinery 1. Scrap Producers Storing unwanted scrap for even a short time takes up valuable manufacturing space that could be used for production. For example, loose banding that customarily fills up a 30-yard dump box needing 160 square feet of plant space can normally fit into two 55-gallon drums after its chopped. ...


    By Sweed Machinery, Inc.

  • Dual Shaft Shredder

    ¡Dual shaft shredder for plastics/rubber scrap or other solid waste recycling. Harden double shaft shredder are being used for the recycling of plastic film, woven sacks, plastic drums, used computer and office machines, as well as wooden pallets. Harden Industries also supplies custom made ...


    By Harden Industries Ltd.

  • In a down economy

    Look to Recycling and Safety to Save Sweed Choppers can turn scrap bands into profits. For nearly 50 years, Sweed Machinery has been designing and manufacturing recycling equipment to help companies control their scrap problems. “We design machinery to meet existing needs and develop custom modifications for individual customers” said Cory Graper, Sweed’s sales manager. ...


    By Sweed Machinery, Inc.

  • Choosing the best shakeout technology for your process

    In the modern foundry, there are many options when it comes to choosing the proper shakeout technology for your metal casting facility. Improper selection can lead to poor throughput, casting damage, and unnecessary down time, all which costs your foundry money. There are many di¬erent shakeout designs available on the market today, including brute force, variable drive, and two-mass ...


    By General Kinematics

  • Choosing the best shakeout technology for your process

    In the modern foundry, there are many options when it comes to choosing the proper shakeout technology for your metal casting facility. Improper selection can lead to poor throughput, casting damage, and unnecessary down time, all which costs your foundry money. There are many di¬erent shakeout designs available on the market today, including brute force, variable drive, and two-mass ...


    By General Kinematics

  • Dense medium separation ideal for processing SR and Zorba

    Designed, engineered and manufactured by Belgium-based Galloo Recycling Solutions (GRS), the GRS Dense Medium Separator uses dense medium drums specifically designed for highly precise separation of plastics from non-ferrous metals. This technology is also ideal for processing shredder residue (SR), and Zorba (mixed materials obtained from SR). According to Galloo, the high-precision capability ...


    By AD REM N.V. (Valtech Group)

  • Special reduction plant shreds bulky steel shavings whilst simultaneously recycling the adherent oil

    Until now, bulky steel shavings covered with oil have, in the most part, simply been disposed of, thus wasting valuable resources. In order to avoid this, the company GEZE GmbH searched for a method of reducing the volume of the shavings and simultaneously recovering the oil adhering to them for re-use. The company Erdwich Zerkleinerungssysteme GmbH developed a plant for this purpose, which ...

  • Waste Reduction and Chemical Minimisation: Oxford Panels

    A program involving recycling, waste reduction and waste treatment, is saving Oxford Panels around $1,000 annually on waste removal cost alone. A 30% saving on the cost of raw materials such as thinners and sandpaper, has also been recorded. Importantly, staff morale has increased. They like the reduction in chemicals and pollutants in their workplace and take pride knowing they are actively ...


  • Can There Ever be Fair Trade Copper?

    FAIR TRADE COPPER might seem an unfamiliar concept, so I'll start at the beginning. There was once a Midwestern copper smelter called Chemetco. In 2001 it declared itself bankrupt, after being fined nearly four million dollars on conviction of sustained and calculated criminal environmental offences. For ten years, the Chemetco corporation discharged hazardous waste into a tributary of the ...


  • Assessment of Environmental ‘Hot Spots’ in Iraq

    Untitled Document Executive summary Introduction In July 2004, the United Nations Environment Programme (UNEP) was awarded a ...


  • Foundries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Plant gains efficiency by replacing vacuum-truck process

    A steel min-mill located in Portage, Ind., that produces and sells hot-rolled steel in the north central United States and Canada. The plant produces about 700,000 tons a year and employs about 400 people. On site is an electric arc furnace melt shop that produces continuous-cast steel slabs and a hot-strip rolling mill for further processing of slabs into rolled coils. The mini-mill's raw ...


    By Oil Skimmers, Inc.

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

  • Spending small to save big in a downturn

    How strategic upgrades in bulk handling components can pay off in the short term "You can"t save your way to solvency" goes the business adage, but suggesting major capital improvements with long-term pay-out in tight economic times may send your co-workers running for cover. Prosperity can often be found between both extremes, where strategically placed equipment upgrades can instantly reduce or ...


    By Flexicon Corporation

  • Plastic Recycling Process

    Plastic recycling is the process of recovering scrap or waste plastics and reprocessing the material into useful products, sometimes completely different in form from their ...


    By Harden Industries Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you