scrap metal Articles

  • Scrap Metal Recycling 2

    This facility was mandated by the Regional Water Control Board to install a treatment system to treat the 8 gpm from their pressure washing operations. The pressure washer is used to remove the dirt mixed with oil and grease from the cranes and skip loader used in the loading and unloading of metal. Integrated Engineers was hired to design and install (turnkey) a 100% water reuse system so the ...


    By Integrated Engineers Inc.

  • Scrap Metal Recycling 1

    Integrated Engineers provided treatability services for the facility for three areas onsite: the oil water separator, tin baler effluent water, and aluminum shavings/cutting oil runoff. The facility processes and bales scrap metal for recycling. The three different waters were treated with Floccin J. Oil Separator The oil separator water is used to remove any free oil that is floating on top of ...


    By Integrated Engineers Inc.

  • Titanium Scrap Metal Processing

    Background A world-class processor of titanium scrap had a wash system whose cleaning solution was becoming contaminated with both free floating unemulsified tramp oil and emulsified water soluble oil that was being washed off of titanium turnings. As the level of oil contamination increased over time in the wash solution, cleaning effectiveness diminished. The processor uses a metric, ...

  • Increased profit from scrap metal

    Reduced availability of scrap metal makes it essential to get the best price for steel and maximise recovery of more valuable metals. The re-emergence of the Far East markets provides the opportunity to take advantage of thousand of empty containers travelling East.  FTL-Dunn Container Loaders give you the flexibility to respond to market demands to maximise the value of your scrap. The ...


    By FTL Foundry Equipment Ltd

  • Strategies To Cope With A Drop In The Prices Of Scrap Metal

    Even though a drop in the price of scrap metal can be frustrating, it is something that we cannot control and, therefore, have to live with. When the market appears to be dropping or is simply not performing well, there are some strategies that we can employ to cope with the strain. We have outlined some of these in the list below for your convenience. ...


    By Highett Metal Pty Ltd

  • Market Is Calling for the Scrap Metal Crusher Machine

    In the twenty first century, the steel industry of China steps into its rapid developing stage. Scrap metal crusher machine is developing with the quick demands of the market. It is a way to reuse and recycle the scraps of the steel by crushing and classifying different quality steel. There is a large demand for the scrap ...


    By Fote Machinery

  • E-scrap: metals too precious to ignore

    Increased recovery of waste electrical and electronic equipment (WEEE) is providing the global recycling industry with fresh challenges. Researchers from Berlin’s University of Technology have been taking a close look at the material flowing into and out of the recycling process, paying special attention to the precious metals content. Their main conclusion is that conventional sorting ...


    By Recycling International

  • Scrap Metal Prices Soaring - Time to Start Demolition

    Now may be the time for you to start that demolition project with ferrous and non ferrous metals rising to new heights.  During demolition, scrap metals such as steel, copper, stainless steel and other metals are collected for recycling.  The revenue generated by these recycling efforts can help offset the costs of demolition.  In many cases, the value of the scrap metals ...

  • How to Start the Scrap Metal Recycling Business

    Are you looking for ways to start a scrap metal recycling business? Do you want to know what to prepare? With so many people becoming eco-conscious, it is quite profitable to open your own scrap metal business. So next let’s learn about the related know-how. 1. Learn about the market. The scrap business is viable in your geographical location, right? How many are ...

  • Non-ferrous metals scrap yard removes metals from stormwater

    Untitled Document Calbag Metals Co., a nonferrous scrap metal recycling facility in Portland, Ore. had difficulty consistently meeting its Oregon 1200Z General Industrial Stormwater ...


  • Aluminum recycling at Centro Rottami, Italy - Case Study

    Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials – The showcase of Centro Rottami. Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials. In fact, as much as 90% of the aluminum produced in the country comes from recycling, and is identical to ...


    By TOMRA Sorting GmbH.

  • Oil Recycling - Case Study

    The problem: Waste oil recycling contributes very much to climate protection through (CO2) energy saving. Compared to the production of base oil the re-refining of waste oil uses 34 % less resources. In the sixties the German government was subsidising the re-refining of waste oil. Because of that the use of waste oil as a fuel was neglected. The used oil re-refining is the ...


    By Dirk European Holdings LTD

  • Invention of the Tire Shredder

    The process of vulcanizing rubber was discovered by Charles Goodyear (yes, you read that right) in 1839, and the development of rubber tires followed not long after (Source: Continental Truck). From there, it didn’t take long for worn-out tires to start piling up, and finding good ways to ...


    By ECO Green Equipment

  • Tire Shredding: Alternatives to Landfills

    For many reasons, whole tires pose a major problem to landfills. The most obvious is the inefficient use of space. The actual rubber of a tire takes up only a small fraction of the space a tire occupies, and the rest of the space is wasted. A less obvious but far more serious problem is that tires may trap methane gasses when buried with other garbage in landfills. When this happens, the tires ...


    By ECO Green Equipment

  • Identification and control of safety and health hazards in metal scrap recycling

    The audience for this guide is anyone who works in the metal scrap recycling industry—employers, employees, safety professionals, and industrial hygienists—should read this publication. This guide can help you identify and manage the hazards associated with exposure to various metals and processing chemicals and with related processes and equipment used in metal scrap recycling operations. Why is ...

  • Metals In China - Coming-of-age for China´s Scrap Conventions

    The Secondary Metals International Forum has established itself as the most mature and international of China’s scrap conventions. In terms of organisation and programming, the latest forum has helped to raise the Chinese scrap convention to a new, international standard while presenting an issues agenda whose impact is likely to be felt for years to come. During the last three years, China ...


    By Recycling International

  • Talk to your scrap buyer

    Scrap dealers don’t want to pick up a bunch of unmanageable scrap that they have to haul back to their yard and try to separate. They would much rather pick up neat, sorted and compacted scrap. Metal recyclers all over the U.S. and abroad use Sweed equipment in their scrap yards, but if a scrap dealer installs a Sweed chopper in their client’s plant, the dealer can increase the volume ...


    By Sweed Machinery, Inc.

  • Circular economy to be scrapped?

    Riverside Waste Machinery’s managing director Jonathan Oldfield, a passionate advocate of UK resource efficiency, talks about the current uncertainty surrounding the circular economy. There are a few things the waste and recycling industry knows for certain in 2015. New rules stipulating the separate collection of paper, plastics, metals and glass for recycling – where technically, ...


    By Riverside Waste Machinery

  • Don’t Scrap It, Strip It!

    Do you sell the insulated wires to a salvage yard every time when you have them?If so, you are deserting money for the value of bright copper wire is 4-5 times of insulated wires. Therefore, why do not star your own business with wire stripping machine?  Wire stripping machine ...

  • How to Recycle Radiator Scrap?

    Radiator is widely used in cars, trucks and other automobiles. Radiators were also once an essential part of a home heating system. In today’ s life, AC radiator is more known by commons. Before discussing how to recycle radiator, let’s have a general knowledge of this three kinds of radiators. Car radiators was almost born with the automobile itself. We know that, as the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you