scrap metal cutting Articles

  • Scrap Metal Recycling 1

    Integrated Engineers provided treatability services for the facility for three areas onsite: the oil water separator, tin baler effluent water, and aluminum shavings/cutting oil runoff. The facility processes and bales scrap metal for recycling. The three different waters were treated with Floccin J. Oil Separator The oil separator water is used to remove any free oil that is floating on top of ...


    By Integrated Engineers Inc.

  • Titanium Scrap Metal Processing

    Background A world-class processor of titanium scrap had a wash system whose cleaning solution was becoming contaminated with both free floating unemulsified tramp oil and emulsified water soluble oil that was being washed off of titanium turnings. As the level of oil contamination increased over time in the wash solution, cleaning effectiveness diminished. The processor uses a metric, ...

  • Identification and control of safety and health hazards in metal scrap recycling

    The audience for this guide is anyone who works in the metal scrap recycling industry—employers, employees, safety professionals, and industrial hygienists—should read this publication. This guide can help you identify and manage the hazards associated with exposure to various metals and processing chemicals and with related processes and equipment used in metal scrap recycling operations. Why is ...

  • How To Recycle Scrap AC Radiator

    Every scrapper’s dream is to find a “jackpot” of metal that is ripe for the picking. If you have any type of experience under your belt, you’ll know that “jackpots” are not happened upon often...unless, you happen to find an AC radiator. These are the non-ferrous tube systems that are used to compress air and radiator off heat. The bigger the AC unit, ...

  • Martin-baker turns scrap metal and fluid into revenue stream with PRAB’s Dualpak Briquetter

    Challenge Aerospace manufacturer needs a chip and fluid processing system to keep up with its machining demands by reducing the volume of metal turnings and to recover expensive cutting fluids for reuse. Customer Martin-Baker Industry Aircraft Ejection Seat Manufacturer Products Dualpak ...


    By PRAB, Inc

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

  • Turning metal wires from pulp bales into profit with TANA Shark

    Metal wires from paper pulp bales are high in value but very hard to shred and clean for selling purposes. Usually the metal wires are stuck with plastics and some remains of the pulping process. This particular type of waste is almost impossible to separate, says a landfill operator in France. Normally the only possibility to handle this type of waste is to dump it at a landfill. This is due ...


    By Tana Oy

  • Three way partnership

    Scrap Producers—Scrap Dealers—Sweed Machinery 1. Scrap Producers Storing unwanted scrap for even a short time takes up valuable manufacturing space that could be used for production. For example, loose banding that customarily fills up a 30-yard dump box needing 160 square feet of plant space can normally fit into two 55-gallon drums after its chopped. ...


    By Sweed Machinery, Inc.

  • New for old – the film cycle case study

    Plastic belongs, among glass, paper and aluminum, to the most common materials when it comes to recycling. Hammerl, headquartered in Gemmrigheim (Germany) proves impressively how profitable and resource-friendly it is to recover PE film. For a year now, the company is capable of producing its own PE granulate from film scrap by using the most modern size reduction equipment. This granulate can ...


    By WEIMA

  • ENERPAT Alligator Shear Simple Introduction

    Alligator Shear, also named Scrap Metal Cutting Machine, used for cutting long scrap metals ...


    By Enerpat Group UK Ltd

  • Case Notes: Resources, recycling and waste

    The regulation of waste is a notoriously complex and confusing area of environmental law.1 Even pinning down the precise meaning of waste under the Waste Framework Directive2 continues to prove difficult, and the mass of litigation and commentary to which this most basic question has given rise is well known. The decision of the European Court of Justice (ECJ) in Mayer Parry, a reference from the ...


  • Screen classifying cutter allows recycling of tungsten heavy alloys

    Aerojet Ordnance Tennessee, a wholly owned subsidiary of aerospace and defense contractor Aerojet General, fabricates parts from tungsten heavy alloys and other refractory metals for defense-related products like ammunition, warheads and electronic shielding. The company also produces components for sporting goods and other end-uses, though defense accounts for about 80% of its business. ...

  • Ingersoll tillage reduces difficult alloy turnings at source with PRAB’s horizontal axis crusher

    Challenge Agricultural disc manufacturer needs to reduce labor spent on safely removing difficult-to-handle turnings at the source which will eliminate safety hazards and increase production. Customer Ingersoll Tillage Group Industry Agricultural Disc Manufacturer Product Horizontal Axis ...


    By PRAB, Inc

  • Foundries Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • International Copper Recycling and Processing Technology

    As the sense of environmental protection becomes popular, the copper scrap recycling industry turns into a hot spot. As for how to recycle and process copper scrap, there are mainly four methods. The following parts of the text will introduce these means in details. 1.Cryogenic ...

  • Sweed model 5703 XHD magnetic separator system

    Built for the most extreme linear scrap challenges Model 5703 XHD Chopper Put four cable-annihilating rotary knives on a beefy 600 lb flywheel that’s driven by up to 60 HP of raw power and you have a super heavy-duty rotary shear with a serious appetite. Sweed’s taken their popular 5703 rotary shear, originally introduced in the early 90’s, and ...


    By Sweed Machinery, Inc.

  • Is It worth Paying Extra Money for Good Wire Stripping Machine

    E-mail: annaamisy@gmail.com We all know that it is a buyer’s market. There are a lot of choices here and haggling is the rule of the game. But when the hunt for cheaper machine ends up losing money, it needs us to think twice. Amisy, a professional manufacturer of wire stripping machine and ...

  • China EPS foam recycling situation and technology progress

    China EPS foam recycling situation and technology progress In recent years, EPS (expanded polystyrene) foam recycling are attention by relevant departments, regulatory guidance and policy support were introduced. From the whole, made our EPS foam recycling was no small accomplishment. Following several EPS foam recycling technology to achieve the degree of ...


    By Harden Industries Ltd.

  • Electric Can Crusher

    Many businesses use a can crusher on their premises to lower their waste management bills and allow for easier recycling. The problem is that many of these crushers rely on mechanical force to work. In other words, they require the user's strength to crush the cans--which only gets you so far. At Bee Cool Manufacturing, we have created the Little Squeeze electric can crusher. And unlike many of ...


    By Bee Cool LLC

  • Is it time to recycle more nickel?

    Now you might think me a little sad, but I have to confess that as a metallurgist, I always find it interesting just how closely the history of mankind is linked to advances in metal working. The first evidence of metal working in Europe dates from around 5500 BC with the extraction of copper, lead and precious metals and this was followed by the working of bronze from around 4000 BC, both of ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you