scrap metal cutting Articles

  • Is It worth Paying Extra Money for Good Wire Stripping Machine

    E-mail: annaamisy@gmail.com We all know that it is a buyer’s market. There are a lot of choices here and haggling is the rule of the game. But when the hunt for cheaper machine ends up losing money, it needs us to think twice. Amisy, a professional manufacturer of wire stripping machine and ...

  • Is it time to recycle more nickel?

    Now you might think me a little sad, but I have to confess that as a metallurgist, I always find it interesting just how closely the history of mankind is linked to advances in metal working. The first evidence of metal working in Europe dates from around 5500 BC with the extraction of copper, lead and precious metals and this was followed by the working of bronze from around 4000 BC, both of ...

  • China EPS foam recycling situation and technology progress

    China EPS foam recycling situation and technology progress In recent years, EPS (expanded polystyrene) foam recycling are attention by relevant departments, regulatory guidance and policy support were introduced. From the whole, made our EPS foam recycling was no small accomplishment. Following several EPS foam recycling technology to achieve the degree of ...

  • Significant increase in the value of aluminium swarf thanks to briquetting process - Case Study

    The GLEICH group increases its profitability by compressing 3,800 tonnes of swarf each year Should you just send the metal swarf created during manufacturing to the scrap dealer or should you increase its value by selling it for profit? The GLEICH group discovered the answer to this around ten years ago. Since then, the family-run business has been turning its aluminium swarf into ...

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas Uriel, the ...


    By HSM GmbH + Co. KG

  • Taking advantage of production waste - Case Study

    Recycling areas: Various scrap Company name: KME (Serravalle Copper Tubes) Located: Serravalle Scrivia (Alessandria), Italy Founded: 1886 Employees: 5700 KME is a leading global fabricator of copper and copper alloy semi-finished products. Each year 405.000 tons of copper and copper alloy semi-finished products (excluding copper wire) are produced. ...


    By Eldan Recycling A/S

  • The city of salem, va’s transfer station: building a cost-effective facility

    Founded in 1802, the City of Salem, VA is situated in the Shenandoah Valley between the Allegheny and Blue Ridge Mountains on the Roanoke River. The City owns and operates its water system, electric distribution system and sewer system.1 Opened in Summer 2006, the City of Salem’s 18,000 square foot transfer station is directly across the street from its previous location. The old transfer ...


    By Waste Advantage Magazine

  • Ideally, data should end up in the shredder - Case Study

    When new computers are needed, companies often need to delete sensitive data reliably from many thousands of old computers - a time-consuming job. Thanks to the HDS 230 hard drive shredder from HSM, Uriel Papierrohstoffe GmbH in Diez (Limburg) can provide their customers with fast and extremely secure data deletion by mechanically shredding hard drives into many particles. Andreas ...


    By HSM GmbH + Co. KG

  • Invention of the Tire Shredder

    The process of vulcanizing rubber was discovered by Charles Goodyear (yes, you read that right) in 1839, and the development of rubber tires followed not long after (Source: Continental Truck). From there, it didn’t take long for worn-out tires to start piling up, and finding good ways to ...


    By ECO Green Equipment

  • ARCO Chemical - Case Study

    Custom Designed Furnace Reclaims $100,000 Condenser PCPC burn-off oven removed 4,240 lbs. of styrene polymer in compliance with local environmental laws. The Problem: ARCO Chemical Company's Beaver Valley plant in Monaca, PA, a manufacturer of styrene-based plastics, was experiencing severe problems and expense with the periodic cleaning of their ...

  • The myth of `residual waste`

    Recently, I was asked by my good friend John Nicholson (a consultant and contributing editor to this magazine) to address a meeting of the Air and Waste Management Association (AWMA) Ontario Sector, regarding my position on generating energy from 'residual waste.' This invitation provided me with the opportunity to research the composition of so-called residual waste -- you know, the roughly 35 ...

  • Tire Shredding: Alternatives to Landfills

    For many reasons, whole tires pose a major problem to landfills. The most obvious is the inefficient use of space. The actual rubber of a tire takes up only a small fraction of the space a tire occupies, and the rest of the space is wasted. A less obvious but far more serious problem is that tires may trap methane gasses when buried with other garbage in landfills. When this happens, the tires ...


    By ECO Green Equipment

  • New Recycling Era for NYC

    Untitled Document New 20-year contract between the city and large-scale recycler ...


    By BioCycle Magazine

  • Applications of Tray Pads in Rolling Mills and the Secondary Aluminum Industry

    Due to the rapid growth in the use of aluminum by automobile manufacturers, there have been an increased supply demands for aluminum rolling mills. The aluminum industry is buoyant as manufacturers take advantage of the materials strength and lightness in preference to steel. A good example is Ford committing to aluminum for the F-150 pick-up truck. Ford Motor made a bold gamble in 2015 with a ...


    By Mid-Mountain Materials Inc.

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • Operator insights: compostable products

    Compostable products are increasingly a part of the formula when companies, institutions, municipal programs and special events decide to go green, usually to implement a food scraps diversion program. Due to increasing demand, the compostable products industry is growing rapidly, with many different options on the market. BioCycle has been covering developments in the compostable products ...


    By BioCycle Magazine

  • Wood Recycling Firms Shift Markets

    In 1995, Apollo Wood & Metal was one of the many wood processors in southern California struggling to survive the downturn in the cogeneration business. Today, Apollo, located in Fontana (about 40 miles east of Los Angeles), is an entirely different company. It has a new name, Apollo Wood Recovery, and a different market: medium density fiberboard (MDF). In fact, the only thing that hasn’t ...


    By BioCycle Magazine

  • Economy in car-making - powder metallurgy

    Powder metallurgy (PM) has made a major contribution to the technology of automotive manufacture over the past 70 years. It has been and is still the fastest-growing metalworking technology. Today, on average, it provides about 10kg of the total components of a car — more in the US, where cars are larger and use automatic transmissions in nearly all units sold and less in Europe and Japan, ...

  • Rainbow Environmental Services aims for Zero Waste with CP Group and Siemens

    Chase Clark wants to be a recycler with Rainbow Environmental Services when he grows up. The three-year-old boy loves nothing more than watching the collection trucks roll out of Rainbow’s Huntington Beach, California Material Recovery Facility (MRF) early in the morning. “Most of the drivers have gotten to know Chase, and they’ll honk their horns and wave on their way out for ...


    By CP Manufacturing, Inc.

  • The Clog Blog

    Clogging and over pressuring are definitely problematic for Liquid Chromatography columns. Back in 2005 John Dolan’s sage advice to chromatographers to make an LC column last forever was simple, “Never open the box!” As John pointed out, this is not practical and I have to agree. But as an LC column manufacturer I have seen remarks from customers regarding clogging as though it ...


    By Restek Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you