scrap mill Articles

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • NEUE HERBOLD Hammer Mills

    NEUE HERBOLD HM series hammer mills offer flexibility in their application range. Through the installation of material oriented rotor milling hammers tools various types of brittle plastics such as electronic scrap, wood scrap, and organic insulation material (glass-wool, stone-wool,...)Advantages- flexibility in their application   range - heavy duty design- reduced space ...

  • Ferrous scrap: are the best prices still to come?

    In many instances, steel scrap prices have more than doubled since the latter part of 2007. And the upward momentum could be sustained into the second half of this year, according to expert feedback from the BIR Spring Convention in Monte-Carlo. However, higher prices are also placing significantly more pressure on the financing of steel and scrap processing operations, it was noted. Nickel & ...


    By Recycling International

  • Scrap Metal Prices Soaring - Time to Start Demolition

    Now may be the time for you to start that demolition project with ferrous and non ferrous metals rising to new heights.  During demolition, scrap metals such as steel, copper, stainless steel and other metals are collected for recycling.  The revenue generated by these recycling efforts can help offset the costs of demolition.  In many cases, the value of the scrap metals ...

  • Eliminate the #1 hazard in the tube mill industry

    Article from June issue of Tube and Pipe Journal Nearly every day mill operators are injured while dealing with red-hot, razor sharp tube scarf. Sweed Machinery’s TS450 OD Scarf Chopper is the solution that is proven to reduce the risk of serious injuries, make handling of scarf manageable, and increase mill production. Installing a Sweed chopper in place of an existing winder ...


    By Sweed Machinery, Inc.

  • Mini Steel Mills Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Oil skimmer pays off for paper mill

    Skip Hogue is maintenance manager at St Joe Container Corporation, a paper mill and converter in College Park, GA that produces about 100 tons of corrugated boxes each day. Hogue noticed excessive oil in the wastewater discharge from boxboard operations. This oil comes from the rolls and bearings on the corrugating machines, and ends up in the plant's drainage system. Drainage water empties into ...


    By Abanaki Corporation

  • Rotomite dredging iron mill scale-case study

    Crisafulli's Rotomite-6000. Dredging highly abrasive mill scale. Customer: The customer purchased its first SRS Crisafulli Rotomite, a Model 180P, in August 1997, and purchased its second Rotomite, a 6000 model, in the summer of 2007. Application and reason for dredging: The customer provides slag processing, metal recovery, material ...


    By SRS Crisafulli, Inc.

  • U.S. Steel Industry can use those scrap Firestone tires for fuel!

     Leroy Stebbing, a Professional Engineer and forty-year veteran of the steel industry has patented a process for using scrap car and truck tires as a supplemental fuel for melting steel in steel mills. Tires are a valuable addition to the steel process because they add chemical energy and steel to the mixture going into the melting furnaces, he says. The use of tires can improve emissions ...


  • Crisafulli’s rotomite-6000 dredging highly abrasive mill scale

    Customer: The customer purchased its first SRS Crisafulli Rotomite, a Model 180P, Serial #14123 in August 1997, and purchased its second SRS Crisafulli dredge, a Rotomite-6000, in the summer of 2007. Application & reason for dredging: The customer provides slag processing, metal recovery, materials handling, scrap management, surface conditioning (“scarfing”) and a wide ...


    By SRS Crisafulli, Inc.

  • With a Bramidan mill-size baler Chicago Tech inc. is now greener than ever - Case Study

    Chicago Tech inc. improved its internal logistics, freed up warehouse space and at the same time improved the company's recycling efforts while making money on the bales in return. In the middle of 2013 Chicago Tech inc. moved to its new warehouse location in Northbrook, IL. It quickly became obvious to VP of Operations, Dan H. that they needed a solution for disposing of the many boxes they ...


    By Bramidan Balers

  • Electrosteel: slow growth, great future

    Last year, ferrous scrap accounted for 44% - or some 425 million tonnes - of the metallic raw materials used worldwide in steel production. The balance was made up of iron ore, tonnages of which far exceeded scrap although its ferrous content is, of course, much lower. Of those 425 million tonnes, three-quarters was used in electric arc furnaces (EAFs) operated by the so-called ‘mini-mills’ and ...


    By Recycling International

  • Neue Herbold - Hammermills

    Neue Herbold HM series hammer mills offer flexibility in their application range. Through the installation of material oriented rotor milling hammers tools various types of brittle plastics such as electronic scrap, wood scrap, and organic insulation material (glass-wool, stone-wool,...) Advantages - flexibility in their application   range ...

  • Americans are recycling more paper than ever

    Americans are recycling paper at an all-time high, recapturing more than 300 pounds per person each year. That's about half the paper produced in the United States. In addition to improvements in the tactics of waste paper collection, recycling is gaining from China's suddenly ravenous appetite for U.S. scrap paper. Its hunger for recycled paper is fueled by its own shortage of wood pulp and a ...


    By Shred-Tech Corp.

  • In a down economy

    Look to Recycling and Safety to Save Sweed Choppers can turn scrap bands into profits. For nearly 50 years, Sweed Machinery has been designing and manufacturing recycling equipment to help companies control their scrap problems. “We design machinery to meet existing needs and develop custom modifications for individual customers” said Cory Graper, Sweed’s sales manager. ...


    By Sweed Machinery, Inc.

  • Eco-friendly Caribbean Rum case study

    The St. Nicholas Abbey Plantation in Barbados can look back on more than 350 years of history. The method of rum production has not veered from tradition. The process has, however, become more eco-friendly - the boilers being used in the distillery are no longer run with oil but with eco-friendly palm briquettes. Larry Warren, whose family assumed responsibility for the 400-acre plantation in ...


    By WEIMA

  • Small Wood Pellet Machine-Electric Engine

    Author: Alva R. Email: biopelletmachine@gmail.com Website: www.biopelletmachine.com skype: sophia-ren717 TAGS: small wood pellet mill,wood pellet machine,flat die wood pellet ...


  • Plant gains efficiency by replacing vacuum-truck process

    A steel min-mill located in Portage, Ind., that produces and sells hot-rolled steel in the north central United States and Canada. The plant produces about 700,000 tons a year and employs about 400 people. On site is an electric arc furnace melt shop that produces continuous-cast steel slabs and a hot-strip rolling mill for further processing of slabs into rolled coils. The mini-mill's raw ...


    By Oil Skimmers, Inc.

  • Screen classifying cutter allows recycling of tungsten heavy alloys

    Aerojet Ordnance Tennessee, a wholly owned subsidiary of aerospace and defense contractor Aerojet General, fabricates parts from tungsten heavy alloys and other refractory metals for defense-related products like ammunition, warheads and electronic shielding. The company also produces components for sporting goods and other end-uses, though defense accounts for about 80% of its business. ...

  • Shredder Types - Four shaft shredder

    Shredder can be equipped with different types of cutting systems: single-shaft, two-shaft, three-shaft and four-shaft cutting systems. These shredders are all slow-speed systems, in contrast to hammer mills which are generally high-speed systems. ...


    By Harden Industries Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you