scrap recycling equipment Articles

  • How to Start the Scrap Metal Recycling Business

    Are you looking for ways to start a scrap metal recycling business? Do you want to know what to prepare? With so many people becoming eco-conscious, it is quite profitable to open your own scrap metal business. So next let’s learn about the related know-how. 1. Learn about the market. The scrap business is viable in your geographical location, right? How many are ...

  • Garden Street Iron & Metal Processes 8,000 Tons of Scrap Each Month Using Variety of Eriez Recycling Equipment

    Problem: Garden Street Iron & Metal recycling complex, located just west of downtown Cincinnati, OH, has been owned and operated by the Weber family for more than five decades. The complex, set on 22 acres with three nearby rail spurs in Spring Grove, is a beehive of activity as both consumers and businesses truck in ferrous and nonferrous metal for re-processing. To remain on the ...


    By Eriez Magnetics Europe Ltd

  • Talk to your scrap buyer

    Scrap dealers don’t want to pick up a bunch of unmanageable scrap that they have to haul back to their yard and try to separate. They would much rather pick up neat, sorted and compacted scrap. Metal recyclers all over the U.S. and abroad use Sweed equipment in their scrap yards, but if a scrap dealer installs a Sweed chopper in their client’s plant, the dealer can increase the volume ...


    By Sweed Machinery, Inc.

  • Easy upgrade of cable recycling equipment

    The family-owned company Metallurgica Vigevanese S.R.L. is one of the largest and most important recyclers of cable in Italy. In 2003, the Azzini family acquired their first Eldan Recycling plant. Since then business has been very good, and they found themselves facing a pleasant problem; they needed to upgrade their plant - in both quality and capacity. At the end of 2010 they took the decision ...


    By Eldan Recycling A/S

  • Identification and control of safety and health hazards in metal scrap recycling

    The audience for this guide is anyone who works in the metal scrap recycling industry—employers, employees, safety professionals, and industrial hygienists—should read this publication. This guide can help you identify and manage the hazards associated with exposure to various metals and processing chemicals and with related processes and equipment used in metal scrap recycling operations. Why is ...

  • Funding Innovative Uses For Scrap Tires

    Many States are cleaning up their stockpiles of scrap tires, but more roll in every day. According to the industry, each person in the United States generates one used tire annually. A number of states like North Carolina and Illinois are providing grants to stimulate markets for products made from scrap tire rubber, while states like Texas and New York are developing new civil engineering ...


    By BioCycle Magazine

  • Compostable Products And Postconsumer Food Scraps

    “Death of Composting” read the title of a blog posted in June by Ayr Muir, founder and CEO of Clover Food Lab, a restaurant group in Boston, Massachusetts. Startling, to say the least, and certainly compelling to read. Muir’s blog described how Clover Food Lab, a Boston restaurant company, moved to 100 percent compostable products in 2010: “I’d spent 18 months trying ...


    By BioCycle Magazine

  • Recycling IT equipment heralds prosperous year for U Can

    Leeds-based U Can Recycling is forecasting a profitable 2013 as companies across the country respond to strict new targets surrounding the recovery of Waste Electrical and Electronic Equipment (WEEE). Purposefully established to focus upon WEEE – which is heavily regulated by the Government – U Can specialises particularly in the recycling of redundant IT equipment, and has recently ...


    By UCan Recycling

  • Scrap Metal Prices Soaring - Time to Start Demolition

    Now may be the time for you to start that demolition project with ferrous and non ferrous metals rising to new heights.  During demolition, scrap metals such as steel, copper, stainless steel and other metals are collected for recycling.  The revenue generated by these recycling efforts can help offset the costs of demolition.  In many cases, the value of the scrap metals ...

  • E-scrap: metals too precious to ignore

    Increased recovery of waste electrical and electronic equipment (WEEE) is providing the global recycling industry with fresh challenges. Researchers from Berlin’s University of Technology have been taking a close look at the material flowing into and out of the recycling process, paying special attention to the precious metals content. Their main conclusion is that conventional sorting ...


    By Recycling International

  • Company Gumiimpex, starts tire recycling in Croatia after an increase of scrap tires - Case Study

    During a trade mission in 2005 between the Netherlands and Croatia, director R. Kiric of Gummiipex had a problem with an increasing number of scrap tires. After he visited Granuband recycling in Amsterdam, he became very enthusiastic about the solutions of waste tire recycling The approach of this project went as follow: We had a situation discussion at the office of Granuband B.V. in ...


    By Granuband Knowledge Center

  • E-scrap regulations: calls for stronger enforcement

    Demands for an enhanced producer responsibility system and on-going adaptation of the Directive on Waste Electrical and Electronic Equipment (WEEE) by EU member states provided the two main areas of discussion at the 2008 International Electronics Recycling Congress (IERC) in Salzburg, Austria. The congress was marked by a call for greater enforcement of regulations, increased collection rates ...


    By Recycling International

  • How to Set Up Your Scrap Yard?

    Scrap metal business has a huge market because recycled and scrap metal is cheaper than pure metals, therefore a wide scope of businesses can benefit from buying these raw materials at a cheaper price. If you are thinking of starting a scrap metal business, you need to know and consider a lot. First, you need to be able to identify and sort different metals. Buyers will purchase specific metals ...

  • How to get the most value from scrap metal recycling from demolition projects

    Demolition (also known as wrecking or razing) can be a large source of scrap metals depending on the type of item, structure or faciluity being demolished. Metal buildigs or large industrial complexes usually provide the largest sources of metals for recycling. Scrap metals for recycling can be found in the structural members of the buildings, electrical and piping systems, tanks, reactors, heat ...

  • Market Is Calling for the Scrap Metal Crusher Machine

    In the twenty first century, the steel industry of China steps into its rapid developing stage. Scrap metal crusher machine is developing with the quick demands of the market. It is a way to reuse and recycle the scraps of the steel by crushing and classifying different quality steel. There is a large demand for the scrap ...


    By Fote Machinery

  • Zero landfill option for baling wire scrap

    Let’s face it, times are tough; and tough times call for a new way of thinking. The buzz of zero landfill is growing, but with the current state of the economy, it’s difficult to afford capital equipment that can help achieve a company’s recycling goals. As a result, Sweed looked for an option that would allow companies to recycle their scrap wire and get the best value for ...


    By Sweed Machinery, Inc.

  • Aluminum Recycling

    The Customer The Company is one of the largest producers of aluminum. They conduct business worldwide and serve the aerospace, automotive, building, construction, commercial transportation, consumer electronics, oil & gas, packaging and industrial products & services markets. Aluminum is infinitely recyclable and 75% of all aluminum ever produced is still in use today. ...

  • Waste Recycling Plant, Recycling Plant

      Waste Recycling Plant,Recycling Plant The present construction waste recycling already have some technical basis, regardless with the laboratory research or market applications have certain results. Shibang ...


  • Pre-shredders from Erdwich reduce efficient Electronic-scrap

    The handling of electrical appliances has changed drastically over the past 20 years: Nowadays, a defect appliance is replaced rather than repaired. According to United Nations' estimates, 40 million tonnes of electrical and electronic scrap is produced per year worldwide, which will be doubled by 2025. Valuable resources such as steel, nonferrous metals, plastic materials etc. can be recovered ...

  • Cresswood Engineers ‘ever-new’ technology to handle the rigors of pallet scrap

    Grinding pallet scrap is not for the faint of heart. It’s actually one of the toughest mixes of material to grind in the forest products industry. Keeping this unique challenge in mind, Cresswood Shredding Machinery has developed its EVER-NEW technology to tackle the demands of pallet scrap grinding along with reducing costs of machine ownership, and operational headaches. Jack Cress, CEO ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you